Used Emergency Stop Button for sale (9,510)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption Ihodpfswc Rk Eox Abcow One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. Ihsdpfewc Afhex Abcjw No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Year of construction: 2025, condition: new, With our manual length stop MD 50 d, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Isdpfx Abjidln Nocohw

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Ihedpfxjidln Tj Abcow

Year of construction: 2025, condition: new, The robust manual length stop MD 100 d enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings Iedpsidmppjfx Abcohw • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power. • raise and lower manual arm • digital position display with a resolution of 0.1 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2025, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions Ihjdpsfv T Dwefx Abcsw • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder Iedpfeidmp Tsx Abcehw – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Year of construction: 2025, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Trolley with 12 ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping • Additional mountable stop extension l = 200 mm Iodpfx Abefv T Nmocshw • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2025, condition: new, With our manual length stop MD 50 m, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length is measured using an easy-to-read measuring tape with mm graduation and vernier. Existing machines / roller conveyors can be retrofitted at any time. Ijdpfx Abjidln Escohw

Year of construction: 2025, condition: new, AUTOPOS – Motorized Length Stop for Precise Positioning The AUTOPOS motorized length stop is designed for material weights up to 150 kg/m. It is ideal for use with profiles and solid aluminum materials. Especially suited for aluminum processing with a roll width of 300 mm on circular saws and underfloor saws. Product details: ✔ Plastic roller diameter Ø40 mm ✔ Roller width 300 mm ✔ Load capacity up to 70 kg/m ✔ Height adjustable from 800 to 1050 mm ✔ Measuring accuracy 0.1 mm ✔ Program with 20 job memory locations ✔ Motor power: 0.16 HP ✔ Automatic positioning with a maximum speed of 18 m/min ✔ Slow movement of 0.6 m/min Ihedpfepa Nzkox Abcow Available variants: AUTOPOS-3 – Measuring length 3000 mm, including program memory for 20 jobs and roller conveyor AUTOPOS-4 – Measuring length 4000 mm, including program memory for 20 jobs and roller conveyor AUTOPOS-6 – Measuring length 6000 mm, including program memory for 20 jobs and roller conveyor AUTOPOS-8 – Measuring length 8000 mm, available upon request Perfect For precise aluminum processing with high repeatability and easy operation. Plantec Maschinen GmbH

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings Ihjdeidlpijpfx Abcjw • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: new, Roller conveyor with length stop Configurable in different lengths and widths. Optionally available with driven rollers, cross pusher, material chute etc. Cross cut fence manually, by means of hand crank or motorized adjustment. Position readable via digital display. Isdpfx Asd A Ufbebcjhw Stop fixed or hinged. Please indicate the desired length, roll width/material and height when making inquiries.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Ihjdpevyp H Uefx Abcew Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Year of construction: 2015, condition: excellent (used), Used stop system with handwheel and digital display, 3,000 mm measuring length Lightly used, top condition The TMDG stop system is an efficient and convenient length measuring system. The system was specifically developed for use with our aluminium circular saws. The measurement is displayed via an easy-to-read display. The length is set manually using a handwheel, and the stop carriage is clamped manually. The system comes complete with a roller conveyor (plastic rollers)! - Specific information: • Mounted "left" on the machine, measurements increasing from "right" to "left". • Total length: 3,500 mm • Support width: 300 mm • Travel distance: 3,000 mm • Number of rollers: 11 pcs • Weight: 95 kg Ihjdpfsw Suxdox Abcew • Heavy-duty support feet - Technical data: • Plastic rollers, ø 40 mm, width 300 mm • Load capacity: up to 70 kg per meter • Positioning accuracy: +/- 0.1 mm • Support height adjustable from 800 to 1,050 mm • User-friendly control panel • Stop arm can be manually folded up • Length measurement via electronic magnetic tape

Condition: new, Year of construction: 2024, stock item immediately available Ihjdpfx Abjfnp Swjcsw consisting of: ᐳ Stop rail 3 m long ᐳ 2 complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws - The scope of delivery does not include the wooden base strip 50 x 45 mm onto which the stop rail is screwed.

Condition: excellent (used), Year of construction: 2009, Marel scale. Type - START/STOP Scale. Year of manufacture - 2009. Conveyor dimensions - Iedjh Nvd Hspfx Abcehw Length - 85cm. Width - 60cm. Height - 90cm. / adjustable height. 3 pcs. in stock. Price is per piece. DANP.20.

Condition: new, Year of construction: 2025, functionality: fully functional, Exenso Comfort Automatic Length Stop • For use on cross-cut saws, drilling machines, punching presses, and more • Automatic positioning of the material stop • Stop and pusher modes available • Network-capable control unit with numerous software options and interfaces Ihodpfxexmh Uys Abcjw Ideal as an add-on to customer-owned saws or as a component in complete saw systems. Different adjustment lengths available – short delivery times! Customizable interfaces and software extensions possible. Contact us!

Year of construction: 2008, condition: excellent (used), Stromaggegat power generator Running - Ready for operation Ihjdpfoium Eiox Abcew Manufacturer: SDMO Type: R165 Year of manufacture: 2008 Power: 165 KVA Engine: John Deere 6068HFS73 Hours: 19.048 h

Condition: used, suitable for Peddinghaus profile steel shears useful length 2,000 mm Ijdot Iyx Hopfx Abcohw

Condition: used, Year of construction: 1974, operating hours: 474 h, functionality: limited functionality, overall weight: 3,500 kg, power: 280 kW (380.69 HP), MWM Diesel Emergency Power Generator 280 kW - Piller Generator We offer an emergency power generator for sale. ⭐︎ Condition: The generator is used and in good condition. ⭐︎ Condition: good (used) Fully functional and well maintained! Recently dismantled! MWM Generator Set 280 kW ++ incl. electrical control cabinet + battery Manufacturer: MWM, Germany Engine: - Manufacturer: MWM - Engine type: TBD 232 V 12 - 12 cylinders - Turbocharged - Diesel - Water-cooled - 1500 rpm Generator: - Manufacturer: Anton PILLER (Germany) - 280 kW - 231 / 400 Volt - 50 Hertz - Operating hours meter: 474 hours Condition: - The generator was used occasionally for backup power in a public building - It has only run 474 hours - Regular maintenance and test runs have been carried out ⭐︎ For further technical details, please see the photos. Scope of delivery as shown Viewing before purchase is possible and expressly encouraged. All items are dismantled, cleaned, and visually inspected for damage by our qualified staff before sale. Ihsdpfx Abjwv Uzuecow All relevant data/information can be found in the description and images. All information is given to the best of our knowledge and belief. The offered item is sold as described and as inspected. International buyers welcome Please ask for shipping costs to Europe and overseas Scope of delivery: - MWM generator set 280 kW - Electrical control cabinet Shipping: - Nationwide shipping within Germany is possible at extra cost - To provide an exact freight quote, please send an inquiry with your postal code

Condition: used, Year of construction: 2005, operating hours: 196 h, functionality: fully functional, machine/vehicle number: 527102228, type of input current: three-phase, input voltage: 400 V, type of cooling: water, total width: 1,400 mm, total length: 4,400 mm, total height: 2,200 mm, fuel: diesel, overall weight: 17,800 kg, continuous power (apparent): 2,000 kVA, continuous power: 1,600 kW (2,175.39 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 76,000 cm³, input frequency: 50 Hz, For sale: 2000 KVA generator set including ADAM fan cooler Generator set dimensions (LxWxH): 4400 x 1400 x 2200 mm Weight: approx. 17,800 kg Engine: MTU 16V4000 G21 Generator: New Age Stamford 2000 KVA generator set Engine and generator fully mounted on base frame Cooling system: Ijdpexcvfxsfx Abcehw Separate free-standing fan cooler as dual-circuit cooler (manufacturer: ADAM Kühlerbau) Fan cooler dimensions (LxWxH): 1400 x 2600 x 2560 mm (Dry) weight approx.: 1,650 kg If you have any further questions, please feel free to contact us.

Condition: excellent (used), functionality: fully functional, CG 3 – Holding Point Grinder for Die Cutting Tools With pneumatic drive for high traction force and a patented hold-down system. Designed for burr-free grinding of holding points while maintaining the functionality of the rubber ejection material. The pneumatic drive uses compressed air to deliver very high and consistent traction force, available at all times without the need for charging cycles or battery changes. The fabric-reinforced compressed air hose is highly flexible. The large support surface prevents tilting during grinding, enabling the operator to grind the holding points straight and accurately in position. The depth of the holding point is precisely set using the depth adjustment. The patented hold-down system for rubber ejection and stripping materials prevents grinding into the rubber or profile. The advantage: fewer and smaller holding points are required, and the performance of the die rubbering remains intact. The holding point grinder is available in versions for corrugated and solid board. The attachments are matched to the standard widths of diamond grinding wheels for both corrugated and solid board. With diamond grinding wheels, breakers can be optimally set. Compared to stone grinding wheels, diamond wheels are extremely robust and thus more resistant to breakage. They are also more durable and sustainable. Each holding point grinder comes supplied with the correct size diamond grinding wheel for the machine. In addition to the holding point grinder, manual holding point tools are ideal for use. The chisels can enlarge the holding points after grinding if required. Two manual holding point tools are also included in the package at no extra cost. Iedpfxjxltkqe Abcohw Advantages at a glance: Pneumatic drive for consistently high traction force Large support surface for straight, precise grinding of holding points Patented hold-down system for solid and corrugated board Note: The unit operates with diamond grinding wheels size 50 × 8 mm.

Condition: new, 2000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 800 kg height adjustment 650 - 950 mm Isdpeupxuiofx Abcohw weight of the machine ca. 0,045 t dimensions 2,07 x 0,48 x 0,21 m Simple roller conveyor with 2000mm length.

Condition: new, impact length 5000 mm Weight of Material maxium 300 Kg/m Ihodpfovkiv Djx Abcsw Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 172 kg length in width 620 mm length in total 5400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, measuring length bis 4000 mm Tube length 4280 mm numbers of toolholders 5 Rohr Edelstahl dimensions 4,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. Ihsdjvkiwuspfx Abcow The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!