Used End Fitting for sale (8,542)

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm Redjyv Nniopfx Airsch square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Rcjdpfx Aoyv Nxzeirjh Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: Flender, shaft coupling -Type: N-Eupex Size 225 -Shaft: Ø 60/70 mm see photos -Dimensions: Ø 225 x 180 mm Rcsdot Trygepfx Aireh -Weight: 26.1 kg

Condition: excellent (used), Geared motor, electric motor, electric geared motor -Condition: Geared motor is unused Rodpfxouil S Ts Airoch -Speed: 59 rpm -Power: 22.0 kW -Design: B3 -Protection rating: IP55 -Shaft: Ø 70 x 140 mm -Dimensions: 1100/400/H435 mm -Weight: 336 kg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor Rcodpfeui U Dyox Airoh -Condition: Gear motor is unused -Speed: 215 rpm -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Protection class: IP55 -Type electric motor: Loher Flender DNGW-132SB04M -Gearbox type: Flender Himmel FZC61-K4 -Dimensions: 870/440/H450mm -Weight: 143 kg

Condition: excellent (used), Year of construction: 2001, operating hours: 1,941 h, Equipment: cabin, FENDT 716 Tractor YEAR 2001 1941.8 mtg, VARIO BOX SUSPENDED CAB SUSPENDED FRONT AXLE WITH FRONT LINKAGE FRONT PTO HYDRAULIC AND PNEUMATIC BRAKING 4 REAR HYDRAULIC DISTRIBUTORS 1 FRONT DISTRIBUTOR Rodpfeukq Nzjx Airjch WHEELS 540/65 R 38 AND 540/65 R 28 + NARROW WHEELS 900/95 R 46 AND 270/95 R 32

Condition: excellent (used), functionality: fully functional, 1 x Blendtherm sauce cooker. All s/s. With full process control. Steam jacketed, front end discharge, with side wall scrape mixing action. Internal dimensions approx: 1.5 m x 750 mm x 600 mm. Overall dimensions: 2.5 m x 1.1 m x 1.8 m high Rcedpfx Aijvxgy Ajrjh

Condition: excellent (used), functionality: fully functional, 1 x Blendtech single shaft ribbon blender rice cooking system with side scrape. On weigh cells. Front end discharge. Dimensions of vessel approx. 900 mm wide x 900 mm deep. Rsdovxg Awepfx Airsch

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. Rcjdpjvwg Hmofx Aireh With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,000 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are DB, DBF, DBFR. 1 pc. Ø38mmx2mm 2 pcs. Ø25mmx1,5mm Rcsdpfx Aisvuqmxoreh 3 pcs. Ø16mmx1,5mm 4 pcs. Ø13mmx1,5mm DB series makes bending operation automatically. DBF series makes bending and feeding operation automatically. DBFR series makes bending, rotating and feeding operation automatically.

Year of construction: 2007, condition: good (used), Max. compressed air: 13 bar Capacity: 390 m³/h Max. internal temperature: 55°C Max. ambient temperature: 43°C Electric drive: 220 V, 1.64 kW Rcjdpfxed E S H Es Aireh Weight: 80 kg Space requirement: 600 x 600 x 1000 mm

Year of construction: 2007, condition: excellent (used), Tops Vendingsystem Fresh fries in 90 sec Rcsdpsfnbltsfx Airsh Options: can be places inside and outside freezer with storagebox 150 portions automatic weighingsystem automatic oilinjectionsystem electronic controlsystem of the oil quality automatic distribution of sauce, cutlery and napkins choices of 4 sauces easy to use energy consumption per serving energy conservation oil temperature Dimesions: 1850 x 1010 x 885 mm Weight: 320 kg 220 V, 50 Hz

Condition: excellent (used), flowmeter Endress-Hauser Pulsmag V + Variomag Rcedpfx Aefcb Nbjireh measuring range:0,0420 m3/sec Power 0 - 20 mA Temperature max. 80 °C lining material: HG Connections DN 150 /PN16 Voltage 220 V measuring range Frequency 50 Hz Length 220 mm Width 260 mm Height 350 mm Weight 13 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz Roded Nlf Rspfx Airech -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg

Year of construction: 2000, condition: good (used), Powered tool holders, VDI 60 / ATC Rodpjh Iz Duefx Airsch For large CNC lathes, RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG, etc. 2 pieces, SAUTER 0.5.921.106072.813, No. 1 and 2, with ATC 1 piece, SAUTER 0.5.921.106072.814, No. 3, with ATC 1 piece, WENDEL 214.060/A3820, No. 4, with ATC 2 pieces, MULTIFLEX 252.71.566, No. 5 and 6, without ATC In good condition.

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 Rcjdsipv Rlepfx Airjh S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg technical specification under subject

Condition: good (used), Marel Townsend Stork rotary crumbing machine in lovely condition. Rodpsmqk Twjfx Airjch

Condition: new, Diamond grinding wheel Make Wendt shape 6 A2 (28416) diameter 125 mm coating width 2 x 9 mm layer thickness 3 mm grit D 91 for universal grinding bore 20 mm Redomxi Tqspfx Airech unused, in opened original packaging

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine - Rsdpfou R S Dbox Airech

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Rjdpfovd Eiysx Airjch

Condition: new, Year of construction: 2026, Included in delivery: 01x End Bracket Extension, new Material color: electro-galvanized Design: universal Total height: approx. 657 mm Usable height: approx. 500 mm Telescopic depth adjustment: 600 – 1,150 mm Frame profile: L-profile 45 x 45 mm Material thickness: approx. 5.00 mm Redpsvbbtiefx Airoch Square tube: 25 x 25 x 1.50 mm (outer) Square tube: 20 x 20 x 1.50 mm (inner) Adjustment grid: 25 mm Hole pattern: 5 x 25 mm Weight per piece: approx. 6.87 kg Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, this will incur additional costs, which can be quoted separately depending on location and scope of delivery.

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm Rcodpfxjq Sz Ahe Airsh 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), Endress + Hauser FMU 671 Z level indicator, Nivosonic V3.1, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rodpoi D Ur Hefx Airoch

Condition: ready for operation (used), Endress + Hauser Nivosonic FMU 671Z/676 Z - FMU 671Z / 676 Z level indicator, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rcedpfxoi D Ur Re Airoh

Condition: used, length 720 mm width 500 mm height 600 mm Rcodpfxjg A U Sxe Airsh weight of the machine ca. 0,7 t dimensions of the machine ca. 1200x640x600 m