Used End Machining for sale (66,505)

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Gedpfx Aedfx Hcenxjit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Giedpfx Asrr Ungonxst Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height Gsdpfot Tdp Tox Anxoit 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: new, Year of construction: 2020, End Milling Machine – Pertici ML200A - Brand new – Year 2020 The ML200 by Pertici Industries is an automatic vertical-axis end milling machine designed for processing aluminium and PVC profiles. The machine allows machining operations with angles from 90° to 22.5° and from 90° to 157.5°, ensuring precision and reliability during end milling operations. Heavy-duty electro-welded steel structure with high-rigidity cast iron bench, complete with sliding milling unit on precision-ground guide rods. Equipped with: Quick pneumatic cutter change system Gsdpfx Asy N S Uljnxoit Lubrication system 5 pneumatic clamping cylinders Three-phase motor 1.4 / 1.9 kW – 1400 / 2800 rpm Oil-pneumatic feed system for the milling unit Adjustable feed speed Profile support with vertical and horizontal clamps Anti-vibration feet User and maintenance manual Ideal machine for professional aluminium and PVC window and door manufacturing. Technical specifications: Motor power: 1.4 / 1.9 kW Power supply: 400V – 50Hz – Three-phase Motor speed: 6700 / 3350 rpm Maximum tool diameter: Ø 250 mm Tool bore: Ø 32 mm Maximum profile height: 130 mm Maximum profile width: 350 mm Maximum machining height: 145 mm Required air pressure: 6 – 7 bar Air consumption: 30 L/min Machine dimensions: Length (a): 1020 mm Height (b): 1700 mm Depth (c): 1410 mm Weight: 310 kg

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Subject to prior sale. Gjdpfx Anoy A Ih Uoxeit

Year of construction: 2000, condition: good (used), Offered from an insolvency is a pipe end processing machine Manufacturer unknown Model ?? Year of manufacture ?? Machine no.?? Gsdofynfwjpfx Anxsit Technical data: Compressed air driven Tube diameter up to 401mm possible Accessories as shown

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20404, elumatec AF 222 For machining transoms and door profiles made of aluminium or plastic Manual feed of the routing unit Large cutting range of up to 400 mm Continuously adjustable table height The material stop can be pivoted up to 60° to the left and right. Notching up to 30° (acute angles, left and right). Detent at 90° with index pin. With quick tool change system and "Spindle Lock" for easy tool changing Precise, smooth-action and low-wear recirculating ball guides Horizontal and vertical pneumatic material clamping provides flexibility Adjustable depth stop Pulsed coolant system Cutting tool diameter max. 280 mm Cutter bore 40 mm Profile height max. 165 mm Cutting height 145 mm Giedpoy Hcb Djfx Anxjt Cutting depth 110 mm Cutting length 400 mm Spindle speed 2,800 rpm Travel 550 mm 2.5 kW of power at 400 V / 50 Hz Compressed air supply 7 bar Power output 2 kW Air consumption 10 l per working cycle, 20 l with minimum-volume lubrication system Length 1,540 mm, depth 905 mm, height 1,000 mm, weight 248 kg Machine is ready for operation. Tool was sharpened

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Giodpey H U Upsfx Anxot Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Gijdoy Hvp Uepfx Anxjt

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop Gsdpfx Aohyuglonxoit

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2000-1-23, End milling machine GRAULE AKF 6/250, year 2006 Condition: very good - Motor 400 V / 3.0 kW - Spray mist lubrication system for cutter Giodpfx Ajq Dq Nienxot - Cutter Ø250 mm - Cutter shaft Ø40 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: FC24DE9128, type of input current: three-phase, total width: 2,800 mm, total length: 1,800 mm, input voltage: 400 V, input current: 32 A, working width: 1,800 mm, total height: 1,800 mm, repeat accuracy: 0.1 mm, feed rate Z-axis: 100 m/min, cutting width (max.): 1,800 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, For sale is a high-end Lectra Vectorfashion automatic CNC fabric cutting system, model VT-FA-Q2-72. This system represents modern industrial cutting technology and has been taken into use at the beginning of 2025. The system has been used in professional garment production and is designed for high-volume, precision cutting with full CAD/CAM integration. It is a complete large-format cutting solution including vacuum table, automated cutting head and computerized control system. The machine is fully operational and has been recorded in production use on 05.03.2026. Originally purchased new for approximately 125,000 EUR. Technical Details • Manufacturer: Lectra • Model: Vectorfashion VT-FA-Q2-72 • Type: Automatic CNC fabric cutting system • Year: 2024/12 • Control: Computerized CNC system (VectorControl environment) • Cutting type: High-speed knife cutter • Vacuum cutting table with hold-down system • Multi-layer cutting capability • Industrial servo motors • Full CAD/CAM compatibility Electrical & Connections • Type of input current: 3-phase (3-Phase + Neutral + Earth) • Input voltage: 400 V (EU standard) Gjdpfx Ajy Akbqonxeit • Input current: approx. 32 A (depending on vacuum turbine configuration) • Compressed air connection: 6 bar (dry, oil-free air required) Dimensions & Working Area • Working width: 1800 mm (72”) • Max cutting width: 1800 mm • Max cutting height: approx. 25 mm (compressed with vacuum) • Total width: approx. 2800 mm (incl. electrical cabinet and access space) • Total length: approx. 4500 – 5500 mm (depending on unloading table configuration) • Total height: approx. 1800 mm Performance & Accuracy • Feed rate (X/Y axis): up to 100 m/min • Repeat accuracy: ±0.1 mm (industrial IX-series standard) Key Features • High-speed automated CNC cutting • Precision multi-layer processing • Advanced vacuum hold-down system • Modular cutting bed design • Fully computer-controlled operation • Integrated safety and emergency stop systems • Industrial-grade construction for continuous production Condition Used production condition Operational and tested in real production Inspection possible prior to dismantling Sold as-is, where-is, without warranty Line Integration The system has been operated as part of a complete cutting line together with • 30 C – Finn-Convoy Spreading / loading system • 32 C – Gerber Conveyor / table system All units are available separately or as a complete production line Applications • Garment factories • Denim production • Workwear and uniform manufacturing • Technical textiles • High-volume automated cutting environments Location Valga, Estonia Dismantling and transport Buyer responsible Professional dismantling recommended due to system size

Condition: excellent (used), IM Very good condition. Giodpfev Air Ajx Anxst

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min Gsdpfxeu Utzys Anxoit mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Godpfxeghl Eme Anxsit Weight approx .: 100 kg

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Make: WAFIOS Type: FEL3 Constr. year: 1980 wire diameter: 2-10 mm spring diameter: 120 mm legth of springs: 10 - 240 mm Location: In our warehouse Gjdpfxewi Szrj Anxjit

Condition: excellent (used), Max. external diameter: 75 mm Hydraulic pressure: 102 bar Safety pressure: 120 bar Tank capacity: 76 L CE standards Dimensions: 2200 × 830 × 1350 mm Giodpfx Anjw U Awaoxot Weight: 1300 kg

Condition: new, semi-automatic chamfering machine Design and manufacturing in England - automatic chuck with material sensor - automatic spindle start when the cutting head is moved - bar diameter 26-105 mm for smaller diameters, a second cutting head is required - adjustable bar support - max. chamfering / turning length 45 mm - facing & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - can be easily moved with a pallet truck - weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty CE-certified Giodpfogkah Tjx Anxot OPTION: - adjustable stop + universal chamfering tool € 1,990

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Gjdpeuxc Rhjfx Anxjit

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps - Mist lubrication system - depth adjustment Godor Iiimspfx Anxjit - 400V

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Giedpeyupnxsfx Anxst

Condition: used, Year of construction: 1988, machine/vehicle number: 50531, Vorsatzklebemaschine - End Sheet Tipping machine Hunkeler VEA 400Year 1988 - Serial-No. 50531/10 Size min. 100x70mm - max. 420x310mm Speed 1200-6800 Gijdeh Axf Uopfx Anxst Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. Gisdpfxoxb Ucaj Anxet - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Gijdpfxeuxdb Ue Anxet

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Gsdpop Atgbjfx Anxjit