Used Esd Workbench for sale (491)

Condition: excellent (used), Part suitable for: cars Crodpfxjw Rl Hps Addok Technical condition: very good Optical condition: very good

Condition: good (used), Year of construction: 2013, operating hours: 1,000 h, Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours, less than 1.000 hours, bottle diameter 50 - 105 mm, bottle hight 125 - 370 mm Csdpfeq H Eamox Addork Optional: Set of bottle conveyors, rotating table

Condition: used, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2015, next inspection (TÜV): 01/2025, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, Equipment: ABS, * Edscha sliding roof * 1 axle lift Cedpfxotmbmkj Addsrk * Storage boxes * Air suspension ----Internal vehicle number: 9394----Subject to prior sale and errors

Condition: used, color: other, first registration: 07/2000, Year of construction: 2000, Serial number: NO TEMPLATE Crodpfxjwx Nhze Addek We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Year of construction: 1990, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Crsdpfxju At A Ne Addsk

Condition: used, color: other, Year of construction: 1990, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Crsdpfxou At Dms Addsk

Condition: used, color: other, Year of construction: 1990, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Csdpfxsu At Dts Addork

Condition: new, length 1700 mm width 600 mm height over floor 860 mm table load capacity 400 Kg dimensions 1700 x 600 x 400 m weight 70 kg Workbench with 6 drawers and solid wood worktop Credpfx Adjxtfy Tjdsk Door compartment dimensions (W x D x H) 940 x 400 x 440 mm Small drawer dimensions (W x D x H) 460 x 400 x 120 mm Height adjustment: max. 40 mm

Condition: new, 4 St. 2 St. Plate thickness 45 mm table length 2000 mm range L-W-H 2000 x 700 x 900 mm weight 152 ca. kg. Furnishing: - brand new workbench Crsdjxabbtopfx Addok - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available!

Condition: new, length 1200 mm width 600 mm height over floor 860 mm dimensions 1200 x 600 x 400 m weight 49 kg Workbench with 5 drawers and solid wood worktop Crodpfx Aju Imdqoddsk Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm

Condition: new, length 1200 mm Cedpfx Asu Imm Seddsrk width 600 mm height over floor 860 mm dimensions 1200 x 600 x 400 m weight 47 kg Workbench with 5 drawers, 1 door and solid wood worktop Dimensions 1200x600x25mm Drawer dimensions (internal) 430 x 400 x 110 mm Door dimensions 460 x 380 mm

Condition: new, length 1200 mm Codpfsvn U H Njx Adderk width 600 mm height over floor 860 mm table load capacity 250 Kg dimensions 1200 x 600 x 400 m weight 49 kg Workbench with 4 drawers and solid wood worktop Dimensions of the large drawer (WxDxH) 940 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 460 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 465 x 395 x 440 mm Height adjustment max. 30 mm

Condition: new, length 1150 mm width 610 mm height over floor 910 mm table load capacity max. 450 Kg dimensions 1170 x 640 x 135 m weight 47 kg Crsdpfx Adju Imhvsdek Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 )

Condition: new, length 1560 mm Crjdpfx Adevblg Tjdsk width 760 mm height over floor 880 - 920 mm weight 70 Kg Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm.

Condition: new, The KW 100 Folding Machine from KNUTH is a robust angle bender designed for the manual bending of flat, round, and square steel parts. It features a sturdy design that allows for screw-mounting on a workbench, allowing for infinitely variable bending stop adjustments to suit your needs. With an eccentric quick-clamp, the KW 100 streamlines operation, enabling bending angles up to 120 degrees. For enhanced precision, it includes a bending angle read-out, ensuring high repeatability. With a bending capacity of flat steel reaching 100x5 mm, this machine is ideal for repair shops and metalworking applications. The standard equipment includes various essential tools such as an angle stop, bending plates, and a bending lever. You can rely on the performance of the KW 100 when looking for a competent Folding Machine suitable for diverse bending tasks. Order online today and experience the reliability of our Folding Machines in your metalworking projects. Cedpfxjuxdd No Addjrk

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Credpfx Adei D Dgwjdjk Power supply - 3–phase, 400V Total power - 2.1 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Cutting speed - stepless 0–50 m/min Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 330 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2006, condition: used, machine/vehicle number: 21201, max. working width: 3,550 mm, pressing force: 3,000 kN, machine weight: 19,100 kg, drive power: 29.5 kW, with various bending tools, 1 workbench approx. 200x70 cm, 6-way/2-door Cedpfx Aex Akmkeddjrk

Condition: used, mileage: 1,40,000 km, Year of construction: 2018, Serial number: WDB9066531P61xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21608 Specifications: 2018 model EU-approved until 23.11.2026 Mileage: 140,000 km 163 hp Diesel 4x2 Tires (see pictures) Workbench included, with shelves NOx sensor has been replaced Extra lights DAB/CD Printer drains power Delivery by agreement Description:2018 Mercedes Sprinter 516 CDI van.Workbench included. Owner also has shelves that can be included upon request.Delivery by agreement. Km: 140000 HK: 163 Csdpfx Adoxq Dgtsderk Technical approved: Yes EU-approved until: 23.11.2026 Own weight: 2576 Total Weight: 5000 Payload: 2349 Width: 199,3 Length: 592,6 Euro: 6 Model: sprinter 516 cdi varebil

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar - X-axis travel: 1020 mm - Y-axis travel: 830 mm - Z-axis travel: 240 mm - X and Y travel limited by tool changer: 1020/720 mm - Gantry clearance: 200 mm Cjdpfjxxwxfsx Addjrk - Bushing distance: 100/100 - Table cut-out width/depth: 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm - Recorded machine operating hours: 4951 h - Spindle running time: 2803 h The machine is equipped with a tool presetting device from manufacturer SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. FCA D-01237 Dresden – loaded on truck

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 850 Crodpfxofk Aigo Addjk Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link:

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 Codsudi Unepfx Addsrk 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, table height: 800 mmmessurements (LxWxH): 2480 x 1230 x 800table width: 1230table length: 2480weight approx.: 650 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Csdpfx Aofk Aihjddsrk

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Crsdpfx Adei D Ddisdjk Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 355 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Cjdpefk Ai Djfx Addsrk

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 288 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Crodogrvwfopfx Addek For more information, follow the link: