Used Eitec Gmbh for sale (70,232)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 22,00,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t Crjdpew U N Ixefx Addok - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036943, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the perfect entry-level solution for all-electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, straightforward operation, and short delivery times. This machine can be applied in a wide range of industries, such as packaging, electrical and electronics, medical technology, and automotive. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine design – Fast delivery times enabled by the basic machine concept with a wide range of options Codsw Ur I Ujpfx Addsrk TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: kN 800 • Max. mold opening force: kN 120 • Clearance (h x v): mm 470 x 420 • Mounting platen (h x v): mm 610 x 560 • Mold installation height min. - max.: mm 150 - 400 • Opening width: mm 750 • Max. mold opening stroke: mm 350 • Ejector drive: electric • Ejector stroke: mm 100 • Ejector force forward/back: kN 22 / 22 • Ejector speed forward/back: mm/s 300 / 300 • Max. mold weight: kg 600 INJECTION UNIT • Screw diameter / type: mm 40 / Standard • Effective L/D ratio: 20.0 • Injection pressure: bar 1860 • Shot volume: cm³ 201 • Shot weight at max. stroke for PS: g 183 • Injection speed: mm/s 200 • Injection flow: cm³/s 251 • Screw drive / speed: rpm 334 • Plasticizing rate (standard): g/s 24.7 • Nozzle contact force: kN 34 ELECTRICAL PARAMETERS • Connected load: kW 20.6 • Installed heating power: kW 11.5 • Power supply: V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: t 5.6 • Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface for cascade control, 4-fold • Euromap interfaces for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression molding function • Graphic analysis package The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle Crsdpfx Adouggb Djdsk  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036683, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 Codpfx Asugfupeddsrk ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Open nozzle  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Euromap interface handling E18  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036940, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450 Cedpfx Aougfw Djddsrk  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface pneum. Cascade 4-fold  Euromap interface handling E18 + E67  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS Cjdpfxoud H Dmj Addork  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037426, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 792 cm³, injection pressure: 2.42 bar, injection weight: 721 g, mold height (min.): 250 mm, ejector force: 47,000 N, ejector stroke: 200 mm, opening stroke: 1,250 mm, installation height: 700 mm, total length: 8,230 mm, total width: 2,320 mm, total height: 2,210 mm, overall weight: 19,500 kg, heating capacity: 292 kW (397.01 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 37,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The all-electric PX series is the answer to your questions about more flexibility with further increases in productivity. Robust mechanics, high-precision and dynamic drive technologies and intelligent energy management make the PX a reliable, productive and efficient performer in any injection molding operation. An ergonomically optimized working height, maximum clearance under the clamp and excellent accessibility ensure maximum user-friendliness. The PX series impresses with its flexibility throughout its entire service life. TECHNICAL DATA: KM 251 / 2000 PX G02 (order 38621992) CONTROL  MC6 with 20.5" TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 2500  Mold opening force, max kN 375  Clear width (h x v) mm 735 x 685  Clamping platen (h x v) mm 1000 x 950  Tool installation height min. - max. mm 250 - 700  Opening width mm 1250  Mold opening stroke max. mm 550  Hydraulic ejector drive  Ejector stroke mm 200  Ejector force forwards/backwards kN 47 / 22.5  Ejector speed forwards/backwards mm/s 350 / 350  Max. Mold weight kg 3700 SPREAD UNIT  Screw diameter / type mm 60 / standard  Effective Ls/D ratio 23.3  Injection pressure bar 2420  Stroke volume cm³ 792  Shot weight at max. stroke for PS g 721  Injection speed mm/s 125  Injection flow rate cm³/s 353  Screw drive/speed 1/min 327  Plasticizing flow rate g/s 82.8  Nozzle contact force kN 57 ELECTRICAL PARAMETERS  Connected load kW 63.5  Installed heating capacity kW 29.2  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 19.50  Length x width x height m 8.23 x 2.32 x 2.21 ADDITIONAL EQUIPMENT  Enlarged mold opening width  Low-wear plasticizing (ZE23.03)  Hydraulic core pull 2+2-fold  Core pull pneumatic 1+1 - fold Csdpfx Adsuaavzedsrk  Air valves 1+1-fold  Pneumatic cascade 4-fold  Euromap interfaces E18, E67, E77  Water battery 4 - compartment  Hot runner control points 12 - compartment  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Paper stack lift MZE Diplomat SHPA 175 × 130 The device is in perfect condition. Hydraulic drive, the latest type hydraulic unit. Power supply 400V Panel-operated lifting cycle, fast work. Crjdewyakcepfx Addsk Capacity 1500 kg. Pallet / sheet size 1750×1300 mm

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BREWERIES & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We manufacture private label brands for our clients, as well as automated drink dispensing systems. Our competitive advantage is our highly qualified and experienced engineering team, which allows us to offer comprehensive turn-key project execution. To date in Poland, we have designed and commissioned 28 craft breweries and 3 craft distilleries, produced over 200 private label artisanal alcohol brands for our clients, as well as launched 30 DRINK WALL automatic drink dispensing systems in hotels and restaurants. We would like to offer you a used SALM brewpub brewery. SALM has been continuously manufacturing complete brewing systems since 1924. The brewery was produced in 2023 for a client in Bucharest and has only brewed 5 batches to date, making this installation practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl/beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design, including Salm Brewmatic 02 computerized control system - 1 unit. 2. Copper cladding on the cylindrical sections of the mash and lauter tuns. 3. Stainless steel brewery platforms - 2 units. 4. External kettle for wort heating, equipped with an atmospheric gas burner (natural gas or propane) - 1 unit. 5. Steam condenser for the brewhouse, mash tun, and lauter tun, stainless steel construction with built-in injection condenser and fan for odorless operation and DMS removal - 1 unit. 6. Two-roller malt mill - 1 unit. 7. Two-stage wort cooler - 1 unit. 8. Automatic mains water chiller, activates at water temperatures above 10°C - 1 unit. 9. Stainless steel whirlpool sedimentation vessel - 1 unit. Crsdpfex Aky Dox Addsk 10. Mobile beer pump - 1 unit. 11. Wort aeration system - 1 unit. 12. Oil-free air compressor - 1 unit. 13. Glycol cooling system - 1 unit. 14. Stainless steel, double-walled, PU-insulated hot water tank - 1 unit. 15. Brewhouse access ladder - 1 unit. 16. UNI tanks, 11 hl, double-walled, 100mm PU-insulated, integrated cooling jacket, stainless steel 1.4301, 1.0 bar, built-in CIP - 6 units. 17. TÜV inspection, 6 UNI tanks with a nameplate on each unit. 18. Serving tanks for finished beer, 3.0 bar, 10 hl capacity, stainless steel 1.4301, PU foam insulated, water jacket, horizontal with frame - 4 units. 19. Electronic temperature control for each UNI and serving tank - 10 units. 20. Control cable with protective hose and threaded connector for each UNI and serving tank - 10 units. 21. Set of pipes and fittings for on-site piping installation - 1 set. 22. Set including 1 beer hose, 22m long with fittings, and mini-laboratory. The brewery has type approval from the Polish Central Office of Measures (Główny Urząd Miar) in Warsaw. Upon request, we can organize transport of the brewery from Bucharest to Poland and its installation on site. We are happy to send you more photos and a video presentation of the brewery by email.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 4,100 mm, total width: 3,420 mm, total length: 1,765 mm, load capacity per storage section: 244 kg, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, input current: 8 A, Vertical carousel (lift system) for storage and retrieval of goods. Hänel Rotomat systems operate on the principle of a circulating shelf system (“paternoster”) and enable space-saving, ergonomic material handling. Crsdsx Aqcfspfx Addok

Condition: used, Year of construction: 2005, Lot consists of: (1) Gum Strip Application Ply Cutter Technical Details: Crjdpfoxf Apcox Addsk Please check Sales Brochure for more information.

Condition: used, Year of construction: 1994, For processing blank paper or with print mark reader (automatic register control) Maximum unwind diameter: 1,500 mm Core diameter: 70 mm / 152 mm Maximum cutting speed: 250 m/min (with 80 g/m² paper) Formats: A3, A4 Maximum web width: 500 mm Minimum web width: 250 mm Paper grammages: 60 g/m² - 170 g/m² Maximum delivery belt stacking height: 100 mm Csdpfx Aow R Uqdodderk Control system: Siemens Simatic S5 Technical specifications as per user (without guarantee)

Condition: used, functionality: fully functional, machine/vehicle number: 9420353 IMA, ElmaTech ELMA Vision CM – MF Transformer Handheld Welding Gun for Resistance Spot Welding Manufacturer: ElmaTech GmbH Model: ELMA Vision CM Serial Number: 9420353IMA Location: Morsbach, Germany Condition: Used, technically flawless Description The ElmaTech ELMA Vision CM is a high-performance medium-frequency transformer handheld welding gun (MF-gun) designed for professional resistance spot welding. It is particularly suited for industrial applications requiring high quality standards, such as: - Vehicle construction / bodywork - Metal and steel construction - Automated production lines - Robot-assisted welding cells - Repair and rework areas The modern 10 kHz MF technology ensures: - More stable weld spots - Reduced electrode wear - High energy efficiency - Precise current control Technical Data (as per nameplate) Output Welding current range: 0 – 15 kA Welding energy (Jₘₐₓ): 15 kAs Secondary voltage U₂₀: 12.5 V Input Rated voltage: 560 V Frequency: 10 kHz Duty cycle: 50 % ED Power consumption: 30 kVA Protection class: IP21 Credox Dcm Ejpfx Addjk Additional Information Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Applications - Spot welding of steel, stainless steel, and galvanized sheets - Quality-relevant welding applications - Mobile or stationary MF welding systems - Compatible with ElmaTech MF converters (e.g. MIDISpot Vision QSVM)

Condition: used, Year of construction: 2007, tank capacity: 390 l, GENERAL Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Remarks: 1 pump included in the scope of delivery (no guarantee of functionality) External diameter: 810 mm Internal diameter: 650 mm Total height: 2,050 mm Heating/cooling: present Insulation: present Power: 0.37 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Top head: removable/top cover can be swung open Agitator: magnetic stirrer Mounting: height-adjustable feet Location: Bremen Technical documentation: drawings, various documents, CE marking and Declaration of Conformity Cylinder temperature control: double jacket Name plate: Vacuum: 1.0 bar Volume: 390 liters Double jacket volume: 26.0 liters Cylinder wall thickness: 8 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 990 mm Last application: pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs. HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel Codpfxoxqam As Addjrk AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Crsdpsx Db S Hjfx Addek Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks Codox Aqaqepfx Adderk - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as per photos Csdpfx Adji D T Iyjdork

Year of construction: 2016, condition: as good as new (ex-display), 1.piece .heavy duty gearboxes Make: NORD DRIVESYSTEMS Type: SK9082.1/52 1.piece Left version Cedpfxoh Igwhe Addsrk Shaft diameter 110 mm Shaft length 210 mm M/2 12000 Nm i123,13 Dimensions lying : Length 1200 mm width (with shaft 210 mm) 600 mm Height 600 mm Weight each : 620 Kg Like new Only test run. Can be mounted lying or standing

Condition: used, functionality: fully functional, machine/vehicle number: 9420358 IMA, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision VM – Medium Frequency Spot Welding System Manufacturer: ElmaTech GmbH Location: Morsbach, Germany System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T Serial number: 9420358 IMA Weight: 95 kg MF Transformer Handheld Welding Gun: ELMA Vision VM Serial number: 9420356 IMA Weight: 35 kg Standard: EN500063 Description: Csdpfxsx Dch Ao Adderk This welding system from ElmaTech comprises a high-performance medium-frequency inverter (QSVM 9000/12000T) and an MF transformer handheld welding gun (ELMA Vision VM). It is specifically designed for professional resistance spot welding and is ideal for: - Automotive and body construction - Metal processing - Robot-based welding cells - Manual and semi-automatic spot welding workstations The medium-frequency technology (10 kHz) ensures: - High energy efficiency - Consistent welding results - Reduced electrode wear - Optimal process control Technical Data – MIDISpot Vision QSVM 9000/12000T (MF Inverter) Output: U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5 % Input: Voltage: 3~ 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision VM (MF Transformer Handheld Welding Gun) Output: U₂₀: 12.5 V Current range: 0 – 15 kA Welding energy: 15 kAs Input: Uₙ: 560 V Frequency: 10 kHz Power: 30 kVA Duty cycle: 50 % Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Typical Applications: - Spot welding of steel and stainless steel - Body construction / vehicle manufacturing - Industrial high-cycle production - Robot-supported welding processes - Repair and rework stations

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Csdpfx Ajx Dmbaoddsrk Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: new, Year of construction: 2025, functionality: fully functional, spindle speed (max.): 60,000 rpm, type of input current: AC, table length: 320 mm, table width: 560 mm, year of last overhaul: 2025, warranty duration: 12 months, working width: 560 mm, working length: 320 mm, number of axes: 3, The compact table version LOW MINI was specially developed for separating panels for small-format series, for small series with large formats, and for cost-conscious manufacturing. PCB materials with remnant web connections can be quickly and economically separated up to a size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. Switching the working area from small (320x280mm) to large (320x560mm) format is the highlight of the machine, thanks to its simple and uncomplicated operation. • Short cycle time due to shuttle operation • X/Y axes with linear motor technology • Panel fixation with pin technology • Flexible handling • PCBs with remnant web connections • Milling spindle adjustment with servo technology • Extraction device • Easy operation • Optimal price-performance ratio Manual panel separation – flexible and cost-effective The concept of manual panel separation offers enormous advantages when it comes to flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard is 2-way loading with linear motor technology; to enlarge the working area, operation with a single shuttle is possible. The maintenance and user-friendliness combined with the excellent price-performance ratio allows for pleasant working conditions and also makes investing in this panel separator economically worthwhile. Cedpfoxmfdxjx Addork Axis speed 160mm/s Repeat accuracy 0.02 mm Separation accuracy 0.1mm Shank tool 0.8 - 2.4mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 127 h, load capacity: 1,400 kg, lifting height: 3,744 mm, load center: 600 mm, construction height: 2,365 mm, battery capacity: 375 Ah, battery voltage: 24 V, battery weight: 295 kg, empty load weight: 1,165 kg, Equipment: CE marking, Still GmbH high-lift stacker with foldable stand-on platform, EXV SF 14 Csdsx Ap N Dspfx Addork

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing Crjdpfx Asx Au Tnsddek - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Condition: used, Year of construction: 2011, tank capacity: 956 l, GENERAL INFORMATION Design: vertical Crjdpfxsx Dlqgo Addsk Year of manufacture: 2011 Notes: Technical documentation (including for the agitator) available for one of the two tanks Speed: 24 - 247 rpm Outer diameter: 1,050 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Max. permissible operating overpressure: 1.5 bar Top cover: removable / hinged top cover Agitator: Blade agitator Mounting type: mobile on castors Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, operating manual Cylinder temperature control: double jacket Nameplate: Vacuum: 0.5 bar Volume: 956 liters Double jacket volume: 83.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4401/04 (AISI316) Condition: unused Cylindrical height: 950 mm Last application: pharmaceutical TANK Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Inotec GmbH TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: centrally in top cover Agitator equipment: pneumatically driven motor

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Crodpfx Adjx Ap I Hsdjk