Used Examples for sale (1,121)

Condition: used, operating hours: 1,250 h, overall weight: 1,500 kg, rotor diameter: 252 mm, total length: 1,800 mm, total height: 2,000 mm, total width: 1,200 mm, rotor width: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 90 rpm, filling opening width: 600 mm, filling opening length: 800 mm, No. 3255 Single-shaft shredder WEIMA WL 4 Used, approx. 1250 operating hours Quiet-running and slow-running V-rotor system Motor power main drive 18.5 kW Rotor diameter 252 mm Rotor width approx. 600 mm Rotor speed approx. 90 rpm Hopper volume 0.6 m3 Inlet cross-section 800 x 600 mm LW Reversible blades, concave ground Automatic operation / manual operation Sieve perforation 15 mm Hnedpfx Aox Hhk Rsgwji Suction nozzle 160 mm Transport dimensions approx. 1800 x 1200 x 2000 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2019, overall weight: 36 kg, total height: 1,776 mm, This OMRON TM5-700 robot arm was manufactured in 2019. It is designed for precision and efficiency in automated tasks. Ideal for industries looking to enhance their automation capabilities. Contact us for more information. Additional equipment • Eye in Hand (Built-in) • Camera: 1.2M/5M pixels, color camera • Eye to Hand (Optional): Support for maximum 2 GigE cameras Machine Benefits Qualitative Machine Benefits • "the trackscan sharp49 is a tracker-based 3d laser scanner. With its scan volume of 49 cubic metres, you can digitise large objects such as cars or trucks with high precision. It is very easy to use. Thanks to its camera beam, which records the position of the scanner, no reference marks need to be applied to the object to be scanned. This technology allows for extremely fast digitisation and therefore makes it possible, for example, to make a quality statement about a component in the shortest possible time Hodpfx Agox D N Ehswoni Technical Machine Benefits • Degrees of freedom: 6 rotating joints • Workpiece reach: 700 mm • Workpiece payload: 6 kg • Repeatability: +/- 0. 05 mm • Power supply: input: 100-240 vac, 50-60 hz • Power supply: dc input: 22-60 vdc • Power consumption: typical: 220 watts • Temperature range: operating range: 0°c to 50°c Extra Information Joint Ranges: J1, J6: +/- 270° J2, J4, J5: +/- 180° J3: +/- 155° Speed: J1~J3: 180°/s J4~J6: 225°/s IP Classification: Robot Arm: IP54 Control Box: IP32 I/O Ports: Control Box: Digital Input: 16 Digital Output: 16 Analog Input: 2 Analog Output: 1 Tool Connector: Digital Input: 4 Digital Output: 4 Analog Input: 1 Analog Output: 0 I/O Interface: COM: 3 HDMI: 1 LAN: 3 USB 2.0: 4 USB 3.0: 2 Certifications: Standard: CE Optional: SEMI S2 I/O Power Supply: Control Box: 24V, 1.5A Tool Connector: 24V, 1.5A Typical Speed: 1.1 m/s Dimensions Machine Depth 1118 mm

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Machine Benefits Hjdpfox Nr I Eox Agweni Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Once the machining processes are complete, they are removed again. The robots then transfer the components to a transfer system, which transports them to the downstream cleaning system. The integrated washing line ensures reliable cleaning of the components in accordance with the defined cleanliness specifications. After the washing process, two synchronously operating Fanuc robots take over the cleaned parts in the rear section of the system. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 23 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 3,000 kg, loading space volume: 38.6 m³, loading space width: 2,300 mm, loading space length: 7,000 mm, loading space height: 2,400 mm, Price on request. The price applies ex-stock 33106 Paderborn! Quantity discounts available for purchase of multiple containers. Leasing/financing options available. Double-wing door (DFT) 2 pcs. available directly from stock, RAL 7043 1 pc. available directly from stock, RAL 6004 blue-green 4 pcs. available at short notice, other RAL colors on request Technical specifications: • Internal dimensions: 7000 x 2300 x 2400 mm (usable length) • Usable volume: 38.6 cbm • Unladen weight: 3,000 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • All sheets and profiles continuously welded • Double-wing door with security locking system • Warning markings according to DIN 67620 • Container inspected and approved according to DGUV 114-110 • Floor-to-sidewall connection at 45° Hnedpfoyrddpex Agwji • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Top frame round tube 89 x 6.3 mm • Net hooks • All moving parts greaseable • Steel rollers 159 x 6.3 mm, length 300 mm • Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) • Permissible total weight: 15,000 kg Other designs and sizes available from stock in Paderborn. You are welcome to view our current stock on our website. Roll-off containers according to DIN 30720 Errors and prior sale excepted. Photos serve as examples only! For further questions, please feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 Hnjdowrn Iyspfx Agwoi (Product photo as an example) The machine is CE-certified.

Condition: used, length ca. 6.000 mm width ca. 2.900 mm height ca. 780 mm workpiece length - max. ca. 4.000 mm workpiece width - max. ca. 900 mm Return conveyor Sicko for returning workpieces to the operator after (for example) multi-blade saws or planing machines. Suitable for the multi-blade saw (1328-400217). Hjdpfx Aoypwalsgwoni

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour 280mmx350mm (X/Z) Measuring range Roughness 280mmx350mm (X/Z) Suitable range Ra Ra from 0.05µm* Suitable range Rz Rz from 0.5µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Hnedswzlcaopfx Agwsi Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 1,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: CypCut FSCUT 3000DE, laser type: fiber laser, laser source manufacturer: Reci, laser hours: 1,000 h, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 245 mm, pipe length (max.): 6,000 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 15 bar, Equipment: centralized greasing system, cooling unit, dust extraction, fume extraction, 2 kW Fiber Laser for Sheet Metal Cutting + Pipe Cutting Attachment Ø245 mm – Complete HOYSOOK Set, Model 3015, in Excellent Condition – Used Only for Short Production Test Series, Year of Manufacture: 2024. Manufacturer: HOYSOOK Model: 3015 Year of Manufacture: 2024 Fully Industrial Set Reason for Sale: Change in Production Profile Operating Hours: < 1000 h Description: For sale: Modern fiber laser (2,000 W) for cutting sheet metal and pipes. The machine is in a full industrial configuration, manufactured in 2024, and the laser source has less than 1,000 hours of operation – practically as new. The machine is fully operational and ready for immediate commissioning at its new location. The unit was used exclusively for small batch production and has only gone through the break-in period (picture of the meter available in the gallery). The sale is due to a change in production profile – the device will not be used as frequently as originally planned. Working Parameters: • Sheet metal cutting area: 3000 x 1500 mm • Maximum pipe length with attachment: 6000 mm, diameter Ø245 mm • Power supply: 380 V, 3-phase, 50/60 Hz • Positioning repeatability: ±0.03 mm • Maximum cutting speed: 50 m/min • Cutting examples: mild steel up to 12 mm, stainless steel 2 mm, aluminum 1 mm Hnedeytccgjpfx Agwji Industrial-Grade Equipment: Mechanics and Drives: • Welded steel bed, hardened and tempered – maximum durability and stability • Gantry beam made of aluminum profiles • Veichi servo motors and drivers • France Moto gear reducer • Taiwanese YYC gear rack • TBI ball screw • HIWIN (Taiwan) or SMAGIC (Japan) linear guides Laser Head and Source: • Raytools BM110 laser head with autofocus and automatic height tracking function • Reci laser source, total hours

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Hedoxph Avopfx Agwjni Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 10026 Cutting mill Pallmann PS 4-5 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 18.5 kW Rotor diameter 400 mm Rotor width 500 mm Hnedpfx Aexph Ewogwoi Rotor knives 4x 2 single knives Stator knives 4x 2 single knives Maximum permissible speed of the drive shafts 640 rpm Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm Hnodsup Uzxspfx Agwsi - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Hnodpeh H Ngtofx Agwei Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Hnsdpfx Aohufigjgwoi Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2023, No. 04377 Brushing and structuring machine VOLPATO SPO 600 Year of construction 2023, new, immediately available, made in Italy VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double grinding width of 1200 mm Electric height adjustment of both units independently of each other Maximum grinding height 330 mm (360 mm) depending on brush diameter both brushes tilt 0-10° (20°) Maximum diameter of brushes 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Change of direction of rotation of the brushes possible Electric height adjustment 0 - 330 mm with Siko indicators Brushes are stored on round bars with a diameter of 90 mm each with linear guides Infinitely adjustable feed speed of the conveyor belt Table height thanks to adjustable feet 800-850 mm Suction nozzle 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the grinding units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Includes 1 steel wire and 1 Tinex plastic brush, each 250 mm diameter, 80 grit NET WEIGHT 700kg Hsdpfx Aeqrtv Rjgwoni CE declaration of conformity Operating instructions in English Brush units inclined up to 20 ° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversely thanks to a helical action of the brushes The machine has 3 inverters, one for adjusting the belt speed and 2 for the brush units = many finishing configurations available Double direction of rotation of the brushes 4kW motors with belt transmission giving double torque to the brush units The images serve as an example and represent an identical machine Transport dimensions approx. 2100 x 1300 x 1900 mm LWH Weight 750kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition According to the manufacturer, the warranty is 1 year after delivery Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

Condition: used, overall weight: 24,000 kg, rotor diameter: 640 mm, number of blades: 114, rotor length: 2,500 mm, power: 247 kW (335.83 HP), No. 10023 Single-shaft shredder Vecoplan VAZ 2500 Used, year of construction approx. 2006 2022 general overhaul Since overhaul approx. 700 operating hours Areas of application: Residual wood, waste wood, packaging material, film, plastic, paper, textiles, domestic waste, commercial waste, production residues as bulk material, production residues in bales 247 kW Rotor length 2500 mm Rotor diameter 640 mm 114 pieces 60x60 cube knives, 4-row Shredding optionally to a grain size of approx. 10 - 250 mm Screen basket 50 mm Throughput capacity up to 25 tons per hour / throughput waste wood approx. 30 tons per hour Material feed with hydraulic pusher Scope of delivery: machine, hopper, control cabinet, refrigerator Hnedpewh T N Uefx Agwei Conveyor belts optionally available Transport dimensions approx. 4750 x 4640 x 2340 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 10019 Various conveyor belts Used Consisting of 8 positions Hnjdpfxjwhp H No Agwsi Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 3: Blue conveyor belt, approx. 13000 x 1000 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Pos. 9: Green garbage truck loading conveyor belt, approx. 5000 x 1000 mm LW, at the height of a garbage truck to load it with garbage Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm Hnsdpewhza Usfx Agwei - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2006, No. 10034 2 pieces stationary single shaft shredder Doppstadt DW 2560 E1 Stationary single-shaft shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 600 operating hours Hsdpfxeym Edts Agwoni Motor electric Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Including replacement gearbox Filling width 1900 mm / Filling length 3060 mm Motor: Manufacturer T-T Electric / Type DC motor LAK 4250 C / Power 315 kW / Rated speed 2000 rpm / Armature voltage 460 V / Armature current 721 A / Field voltage 340 V / Field current 14.8 A / Degree of protection IP 55 / Cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Stationary single-shaft shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (drum condition good, gearbox condition good, motor condition unclear, control unit condition burnt down, hydraulic unit condition burnt down) Since overhaul approx. 200 operating hours Motor elektric Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2008, incl. tool cabinet with various tools Punching force: 550 kN Max. punching capacity, examples: D 40 in 10 mm material D 20 in 20 mm material Throat depth: 500 mm Motor power: 5 kW Hnodpfoyuyitex Agwei Stroke rate with 20 mm stroke: 38 /min Maximum stroke: 60 mm

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 10,498 kg, maximum load weight: 21,502 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 4,550 mm, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, navigation system, onboard computer, seat heater, trailer coupling, Vehicle location: Bovenden. Mercedes PowerShift 3, company ownership. 1x comfort seat, 1x sleeper bunk, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, navigation system, ABS (anti-lock braking system), retarder, PTO, lift + lower function, differential lock, work lights, rotating beacon, leaf-air suspension, air+light trailer coupling, green environmental badge. Wheelbase: 4,550 mm. Body: Rear engine PTO C, for hydraulic pump ISO 7653D and PTO on gearbox, 50 mm trailer coupling, disc brakes on front and rear axles. Well equipped, for example driver’s seat with climate control, navigation, etc. 80 tons gross train weight, body length 6,500 mm, frame height 900 mm. Hodpfxow Hdr De Agweni Day registration on 03.12.2025. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to alterations, prior sale, and errors!

Condition: used, mileage: 2,00,000 km, power: 110 kW (149.56 HP), first registration: 02/2020, fuel type: diesel, overall weight: 3,000 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Volkswagen T6.1 Transporter Panel Van, short wheelbase, permissible gross weight 3,000 kg, 2.0 TDI 110 kW/150 hp, 6-speed manual transmission, 4Motion all-wheel drive, blue color ---- * 2 seats – height-adjustable individual driver and passenger seats with lumbar support and armrests * Heated front seats * "Climatic" air conditioning system * Heated windscreen Hedpfx Aeyt T T Aogwsni * Rear parking aid * LED headlights * Fixed tow bar (trailer load 2,500 kg) * "Composition Audio" radio – monochrome TFT display, SD card slot, USB port, 2 loudspeakers * Mobile phone interface, Bluetooth hands-free system * Cruise control including speed limiter * Light & Vision package * Universal wooden floor in cargo area * Full lining in cargo area * Bott racking system in cargo area * High bulkhead with fixed window * Fixed window in sliding door, rear without window * Additional cargo area ventilation in D-pillar * Reinforced lashing points * Rear wing doors with glazing, heated rear window, with wiper system * Onboard tools and jack * Vehicle without child lock in load/passenger compartment * Fuel tank: 80 L * Truck registration * Spare wheel with regular tire * Heated windscreen washer nozzles and washer fluid level indicator Additional equipment: Passenger airbag deactivatable, driver/passenger airbags, traction control (ASR), all-wheel drive, Composition Audio system (radio, SD card interface, MP3 playback function), electrically adjustable and heated exterior mirrors, left and right convex outside mirrors, rubber flooring in driver’s cab, ASR deactivation switch, brake assist (HBA), multi-collision brake system, crosswind assist, laminated windscreen, 2 folding remote keys, lockable glove compartment, LED interior lights in the load/passenger compartment, pollen filter, body type: standard panel van, normal roof, grille with chrome strips, height- and reach-adjustable steering column, 2.0L TDI engine – 110 kW, rear fog light, non-smoker package, 3,000 mm wheelbase, low emissions to Euro 6d-TEMP standard, sliding door on right side of load/passenger compartment, electro-mechanical power steering, fabric seat upholstery, adjustable passenger seat in driver’s cab, 6.5x16 steel wheels, start/stop engine system, driver’s seatbelt warning system, heat-insulating glazing, central locking with remote control and interior button ----Financing and trade-in of vehicles possible ----Affordable installation of accessories and special equipment available (all price examples incl. installation and VAT): ----Errors and changes excepted!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 139437, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, type of input current: AC, input voltage: 230 V, compressed air connection: 5 bar, year of last overhaul: 2025, ambient temperature (max.): 35 °C, ambient temperature (min.): 13 °C, temperature: 20 °C, pressure: 4 bar, Equipment: documentation/manual, type plate available, 3D CNC coordinate measuring machine of the compact class. It fits into any office due to its low installation height. Features: - Base frame - VAST XXT sensor - Probe changer magazine - 3 probe changing plates Hnodsx Tg Tkopfx Agwsi - Calibration sphere with certificate - Machine folder, device documentation, user manual, various probes (see pictures) - HP XW 4600 workstation for Zeiss WIN XP and monitor + keyboard and mouse Dimensions in mm (without base): Length: 1160; Width: 1080; Height: 1803 With base: Length: 1170; Width: 1090; Height: 2480 Weight of the CMM in kg: without base: 350; with base: 445 Max. permissible workpiece weight in kg: 100 • Measuring volume: 500 x 500 x 500 mm³ • Duramax year: 2008 • Control panel: BP26 • Software: ZEISS CALYPSO 4.8 • Sensor: VAST XXT (probe changer, single-point measurement & scanning) • Accuracy (example according to ISO 10360-2): 2.4 + L/300 µm (at 18-22°C) Runs without any issues and has been checked by us.

Condition: used, empty load weight: 5,900 kg, maximum load weight: 28,600 kg, overall weight: 34,500 kg, axle configuration: > 3 axles, first registration: 10/1988, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 1988, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 69589 Hendricks, Goch, Rutemund Tank * Year of manufacture: 1988 * Air suspension Hsdpsyu Hhcsfx Agwjni * Lift axle * Rotary lobe pump * Suspension: Air * Gross vehicle weight: 34,500 kg * Unladen weight: 5,900 kg * Payload: 28,600 kg * Permissible total weight: 34,500 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Stadler TSA 32LD * Vogelsang rotary lobe pump 136-210 * Rear discharge * 2 chambers with anti-surge baffles * 3 manhole covers * Unladen weight: 5,900 kg Disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and simple financing solutions * Handling of all (export) documentation * Ordering of export plates/customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transportation of commercial vehicles Please contact our trained staff; we will be happy to advise you.

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) Hnedpfjyt Ikvex Agwji – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion Hnjdpfx Asyaw Ecjgwoi or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. One touch, More Welding Solutions, Stocks for sale!!