Used Fabrik for sale (63)

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Nsdpfou Thbxsx Adwocl Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Clamp holder make Comet FG IIII (28396) for Comet threaded steel FG IIII TR 12 Ncjdpfjmk E Uijx Adwol

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Max. Z-axis travel: 650 mm Table size: 500 x 650 mm Nsdpfxsvbgiij Adwocl Cut-off detection Nordmann dressing spindle Oil supply via central factory supply

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke length: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Nedpfxjwvh R Aj Adwjcl Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Nsdpfovcqzrox Adwjcl

Year of construction: 1983, condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system Ncsdpsvcqt Ujfx Adwel

Year of construction: 2017, condition: ready for operation (used), Belt length: 2900 mm Njdpfx Aedzx E Uodwecl belt width: 360 mm Belt speed infinitely variable drive motor table height adjustable by: +/- 500 mm space requirement: 2000 x 600 x 650/700 mm

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15194, tank capacity: 2,000 l, Laska mixer in very good condition… Ncodpfxjxbbkde Adwjl

Condition: excellent (used), Machine for grinding bookbinding knives. grinding length 1500 mm. new grinding head. Ncsdpfx Aewm Ht Rsdwjl

Year of construction: 2025, condition: new, functionality: fully functional, A total of 450 unused Big Bags are available for sale. Each pallet contains 150 units. Delivery on pallet is possible for an additional freight charge. Njdpfxsxr Dm Aj Adwjcl Quality and specifications: Big Bags, form-stable, uncoated, SWL (safe working load) 1250 kg, SF 6:1, 200 g/m², top open, bottom closed, 4 lifting loops, each 25 cm in length, overhang, UV-stabilized on EWP approx. (100x120x100 LxWxH) Dimensions: approx. 101x101x200 cm (external dimensions) No individual bag sales—only by full pallet! The above price refers to one pallet (150 units).

Condition: excellent (used), Year of construction: 2018, Converting Line GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Nsdpfsw I T Ucjx Adwocl Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Nedpfx Aet Ucpbedwscl Inquire by phone or email!

Condition: excellent (used), Steam cleaner for crates/containers 60x40 Brand Maskinfabrikken Hillerslev a/s, plastic chain, belt width: 350 mm, clearance: 650 mm x 200 mm, Nodpfx Adov Ey Ugjwjcl overall dimensions: 7300 mm x 1500 mm x 2000 mm

Condition: like new (used), Previous Next MFL CJ 108/80 Jaw Crusher “MFL CJ 108/80” for Sale Manufacturer: Maschinenfabrik Liezen G.M.B.H. Type: CJ 108 / 80 Mach. No.: 95 395 103 Inlet size: 1.080 x 800mm Electrical Motor: Included Ncsdpsglvx Tefx Adwjl

Year of construction: 1999, condition: ready for operation (used), Rotational speed: 6000/min, weight: 500kg, with controls. Nodpfohmp Iqex Adwjcl

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Ncodpfx Aoxlcfkjdwel Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: ready for operation (used), Year of construction: 2018, Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Ncedpevzbg Nsfx Adwsl

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Ncodst Amc Iopfx Adwjl

Condition: ready for operation (used), Year of construction: 2014, Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Nsdpevzbhajfx Adwecl

Year of construction: 2022, condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Ncodjv Hbv Uepfx Adwsl Condition: new Equipment: 80 bar high-pressure pump + 2 additional pumps for chip flushing, frequency control for high-pressure pump to adjust the pressure, double switchover filter for fine filtration

Year of construction: 2021, condition: like new (used), Coolant system / belt filter system 980L Nedpfev Hcynsx Adwecl Manufacturer: Bürener Maschinenfabrik Condition: new Equipment: 40 bar high-pressure pump + 2 additional pumps for chip flushing, double changeover filter for fine filtration

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3793000, Please tell us your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine technical data: 5-axis grinding center including oval feed belt and loading portal 12-station tool changer with HSK 63 Max. travel X-axis 500 mm Max. travel Y-axis 650 mm Max. travel Z-axis 650 mm Table size 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply Without packaging; any warranty is excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical specifications, the completeness of accessories and tools, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. Ncjdevbgccopfx Adwsl

Year of construction: 2009, condition: used, For sale are 7 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Three of the seven centrifugal pumps have a motor. Ncjdpsga Dtyefx Adwjl Data on the pump: Number of pieces: 7 / 3 with motor Length: 226cm (with motor) height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No: 920615 Year of construction: 2009 connections: DN100 PN16 Motor data: Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0014.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Year of construction: 2009, condition: used, For sale are 8 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Five of the eight centrifugal pumps have a motor. Number of pieces: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Ncjdpfx Adsga Dtcjwsl Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of construction: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 40 t, installation height: 200 mm, stroke length: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg. Nsdpfsvzwxuex Adwscl