Used Fans for sale (2,560)

Condition: used, mileage: 13,02,000 km, power: 355 kW (482.67 HP), first registration: 02/2020, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, total length: 9,960 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2020, Equipment: tail-lift, Information in English: DAF Box: Cool / Freeze / Flowers Frigo Van Beurden Refrigeration: Carrier TRS Iceland, temperatures from -25 to +30 degrees Tail lift: Dhollandia 1,500 kg First registration: 02 ? TÜV (technical inspection): 02 ? 2027 Mileage: 1,302,000 km Engine power: 355 kW (480 hp) Transmission: Automatic Box dimensions (L x W x H): 753 x 250 x 277 cm (internal) Truck dimensions (L x W x H): 996 x 260 x 400 cm (external) Unladen weight: 13,915 kg Payload: 13,085 kg Permissible total weight: 27,000 kg GCW: 50,000 kg Color: Red, original color Suspension: Full air suspension Emission class: Euro 6 D Axle configuration: 6x2 Tire Axle 1: Michelin 385/55 R22.5 L40% R40% Tire Axle 2: Michelin 315/70R22.5 L40% R40% Tire Axle 3: Michelin 385/55 R22.5 L20% R20% Cab: Super Space Cab Extras: Retarder/Intarder, full air conditioning, automatic transmission, engine brake, auxiliary air conditioning, auxiliary heater, refrigeration unit, adaptive cruise control, 2 beds, Smart Tacho Gen2, radio/CD player, TRS Carrier Iceland refrigeration unit, temperature control between -25 and +30 degrees Celsius, fully insulated Van Beurden box body (year of construction), 5 stainless steel load securing rails in floor and ceiling, Hydraroll roller bed, Dhollandia 1,500 kg tail lift, fully pneumatic VBG trailer coupling, lift axle, steerable axle, ABS, EBS, complete service history available, directly from the first owner, immediately available and ready for use, box body large enough for 24 CC (Danish roll trailers), 14 standard block pallets or 18 Euro pallets, etc. Can be delivered with the following trailer: 2-axle Draco box trailer Beurden Insulated box trailer TRS Island Dhollandia tail lift Hydraroll roller bed NL trailer Box: Cool / Freeze / Flowers Frigo VAN BEURDEN Chassis manufacturer and type: DRACO MZS 220 Refrigeration: Carrier TRS Iceland First registration: TÜV (technical inspection): ? 2027 Njdpfjzmpprex Akmedc FRC ATP: No Internal dimensions (L x W x H): 811 x 250 x 293 cm Unladen weight: 7,350 kg Payload: 12,650 kg Permissible total weight: 20,000 kg Lift: Dhollandia 1,500 kg lift Suspension: Air suspension Axles: BPW Eco Plus ? Disc brakes Tire size: 265/70 R19.5 Tire tread depth Axle 1: Goodyear L50%, R50% Tire tread depth Axle 2: Goodyear L50%, R50% Extras: Carrier TRS Iceland refrigeration unit, Dhollandia 1,500 kg lifting capacity, ABS, EBS, BPW Eco Plus axles with disc brakes, 3 toolboxes, fully insulated body from Van Beurden, Hydraroll roller bed, 5 stainless steel rails in floor and ceiling, additional lighting, rear doors, complete service history available, immediately available and ready for use, the body offers space for 26 CC (Danish transport carts), 16 standard pallets and 20 Euro pallets. Beautiful combination, completely from the year READY FOR IMMEDIATE USE! More information: * Payload: 13085 kg * Type | First axle: Michelin R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inside left | First axle: 40% * Tire tread depth inside right | First axle: 40% * Maximum axle load | First axle: 8000 kg * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth outside left | Second axle: 40% * Tire tread depth inside left | Second axle: 40% * Tire tread depth inside left | Third axle: 20% * Tire tread depth outside right | Second axle: 40% * Tire tread depth inside right | Second axle

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, back gauge travel distance Z-axis: 1,000 mm, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Ndsdpfsxzf Dzjx Akmsc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Nedpszuz Icsfx Akmsdc Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2000, load capacity: 165 kg, arm reach: 2,643 mm, controller manufacturer: FANUC, controller model: R-J3, number of axes: 6, This 6-axis FANUC Robot S-430i W was manufactured in 2000. It features a maximum load capacity of 165 kg and a maximum reach of 2,643 mm, making it suitable for various automation tasks. If you are looking to get high-quality robotic capabilities, consider the FANUC Robot S-430i W robot arm we have for sale. Contact us for further details. Njdpfxozk Exqo Akmedc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 40 kg, The FANUC LR Mate 200iD/4S is a compact and highly precise six-axis industrial robot with a short arm, designed for rapid handling and automation of production processes. Due to its very compact dimensions, it is particularly suitable for installation in confined spaces and compact production cells. The robot has a payload capacity of 4 kg, a working range of 550 mm, and a positioning repeatability of ±0.01 mm. The manipulator itself weighs only 20 kg, which allows for flexible placement and easier integration into production equipment. Ndedpfezx Enbex Akmjc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 27 kg, The FANUC LR Mate 200iD/7L is a compact, six-axis industrial robot with an extended arm, designed for fast and precise handling of smaller parts. The 7L variant (Long arm) offers a reach of 911 mm, which is the longest reach in the LR Mate 200iD series, while maintaining a compact design. Nodezx E Uhopfx Akmodc It is particularly suitable for pick & place applications, material handling, operation of CNC machines and other production equipment, assembly, packaging, sorting, and component transfer. Thanks to its high axis speeds, it is also suitable for applications with short cycle times. 🔧 Robot service and refurbishment We provide complete service and refurbishment for industrial robots. Beb Azczjzp Siyj Aaell ⚙️ Spare parts We sell spare parts and also provide professional repair and refurbishment services. 🤖 Robot sales with warranty We supply industrial robots with a warranty on commissioning or a warranty of up to 12 months. 🏭 More than 13 years of experience We have been operating in the market for more than 13 years and offer experience, technical know-how, and our own service facilities. Do you need service, a spare part, or a robot? Contact us.

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: FANUC, controller model: R-30iB, This 6-axis FANUC R2000iB/165F robot arm was manufactured in 2013. Ideal for automation tasks, it enhances precision and efficiency in production lines. Consider the opportunity to buy this FANUC R2000iB/165F robot arm. Contact us for more information. Machine Benefits Njdpfsyaih Nsx Akmedc Technical Machine Benefits • Load capacity: 165 kg • Reach: 2655 mm

Condition: new, Year of construction: 2026, SEM65/28 PVC Corrugated Pipe Extrusion Line Complete Production Line for Flexible Corrugated PVC Pipes Ø10–40 mm The SEM65/28 extrusion line is designed for continuous production of flexible corrugated PVC pipes. The line includes automatic material feeding, drying, extrusion, water-cooled pipe forming, automatic cutting and double-station winding. Equipped with Siemens PLC control and DELTA frequency inverters. Only one operator is required. 1. General Specifications * Model: SEM65/28 * Material: PVC * Capacity: 40–70 kg/h, depending on material * Pipe Diameters: Ø10, 16, 20, 25, 32, 40 mm * Wall Thickness: 1–2 mm * Production Speed: 5–30 m/min * Total Installed Power: 50 kW * Actual Power Consumption: Approx. 70–80% * Power Supply: 380 V, 3-phase, 50 Hz * Operating Direction: Right to left * Operators: 1 Nedpfxoz Nkpwe Akmedc * Color: Grey * Installation Space: 11 × 2.5 × 3 m * Operating Temperature: +5°C to +40°C * Maximum Humidity: 85% 2. Equipment Included 1. ZJ300 Vacuum Auto Loader – 1 unit 2. STG-U100 Hopper Dryer – 1 unit 3. SEM65/28 Single-Screw Extruder – 1 set 4. Extrusion Die Head with Interchangeable Tooling – 1 set 5. Corrugated Pipe Forming Mold Blocks – 3 sets Ø10-40, Ø25-20, Ø16-32 6. High-Speed Corrugator – 1 unit 7. Automatic Double-Station Winder – 1 unit 3. SEM65/28 Single-Screw Extruder * Screw Diameter: 65 mm * L/D Ratio: 28:1 * Screw Speed: 0–40 rpm * Main Motor: 22 kW, asynchronous * Motor Control: DELTA vector inverter * Screw & Barrel: 38CrMoAlA, nitrided * Heating Zones: 4 * Heating Power: 3.2 kW × 4 * Heaters: Ceramic * Cooling Fans: 4 × 0.18 kW * Feed Throat Cooling: Water * Gearbox: SJF-173 * Gearbox Lubrication: Forced * Gear Material: 20CrMnTi steel * Capacity: 40–70 kg/h * Control: PLC 4. High-Speed Corrugated Pipe Forming Machine Water-cooled corrugator with an enlarged cooling area for efficient pipe forming. * Main Drive: 4 kW induction motor * Speed Control: DELTA inverter * Forming Plate Hardness: 63.4 HRC * Cooling: Water * Vertical Adjustment: Electric * Horizontal Adjustment: Manual * Adjustment Motor: 1.1 kW * Platform Travel: 800 mm * Forming Method: Pneumatic blow forming * Vacuum Pump: 4 kW Automatic Cutting System * Pneumatic inline cutter * Adjustable cutting length * PLC control 5. Automatic Double-Station Winder * Type: Double-station * Drive: 12 N·m torque motor * Speed Control: Automatic synchronization * Traverse: Spindle speed tracking, frequency-controlled * Station Switching: Pneumatic self-locking * Air Pressure: 0.6–1 MPa 7. Wire device * Device for pulling a steel wire through corrugated PVC pipes during production, allowing easier cable installation 8. Applications Production of flexible PVC corrugated pipes for electrical cable protection, cable management, industrial installations and general-purpose conduit applications.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, Welding fume extraction, dust extraction, self-cleaning filter, pneumatic, vacuum-based KEMPER. Nedpezlqkhofx Akmjdc For welding, grinding, sandblasting and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Device for wall mounting. Fan power: 1.5 kW Flow rate: 1000 m3/h Maximum vacuum: 3000 Pa Extraction arm length: 3.00 m Stock number: 0391

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. Nedpez N Am Uofx Akmedc The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan Nsdpfx Akow Ewafemedc - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: new, mileage: 11 km, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, the market. Ndodsz I Hurspfx Akmsc Visit us on or call us on

Condition: new, Year of construction: 2026, Automatic board feeding system for pallet nailing machines Nsdpoz I Dm Eefx Akmsdc

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 15 W, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 8,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, workpiece weight (max.): 600 kg, total height: 2,841 mm, total length: 3,363 mm, total width: 2,812 mm, overall weight: 6,850 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC Vertical Machining Center VICTOR F106, Fanuc Oi MS Plus, 4th axis, chip evacuation system Fanuc Oi MS Plus control, 10.4” Type 3 color graphic display, manual guide I, AICC-2. Serial, USB, and Ethernet ports. - Spindle cooler with refrigeration unit - De-oiler - Lateral left chip evacuation system complete with chip conveyor - 4th axis rotary table, Golden Sun model CNC-250R 250mm diameter rotary table, complete with automatic tailstock with manual movement, drive, motor, and wiring. Travels X-axis: 1060 mm Y-axis: 600 mm Z-axis: 560 mm Spindle nose to table surface distance: 150-710 mm Column to spindle axis distance: 627 mm Table Table dimensions: 520 x 1120 mm Maximum load capacity: 600 Kg T-slot dimensions: 5 x 18 x 100 mm Spindle Maximum speed: 8000 (optional 10000) rpm Spindle taper: BT-40 Spindle motor power: 11-15 kW Axes Rapid traverse rates X - Y - Z: 32 m/min Axis servomotors: 2.5 - 3 kW Tool changer Number of positions: 24 Through-spindle coolant with single MAHLE filter + high pressure 20 bar Linear guides with roller recirculation Dimensions and Weight Width: 2812 mm Height: 2841 mm Length: 3363 mm Weight: 6850 kg Ndjdpfx Ajz Hc Acokmjc Price: 61,500.00 € + VAT

Year of construction: 2016, condition: used, overall weight: 4,200 kg, total length: 2,900 mm, total width: 3,260 mm, total height: 2,200 mm, workpiece weight (max.): 3,000 kg, FANUC ROBOCUT α-C800iB Wire EDM Machine Technical Specifications: Max. Workpiece Dimensions: 1,250 × 975 × 300 mm Max. Workpiece Weight: 3,000 kg Wire Diameter: 0.10–0.30 mm Max. Taper Angle: ±30° / 150 mm Max. Wire Spool Weight: 16 kg Travel X-axis: 800 - mm Nsdpfx Aoz N Nuxskmjdc Travel U-axis: 200 - mm Dimensions (LxWxH) approx.: 2900 x 3260 x 2200 mm Component weight max.: 3,000 kg Control: FANUC Series 31i-W Model B Travel Y-axis: 600 - mm Travel V-axis: 200 - mm Weight approx.: 4,200 kg Travel Z-axis: 310 - mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 1989, condition: good (used), Complete Fanuc CNC control system, manufactured in 1989. Type: 0-Mate T. Installed in the cabinet. Nsdpoh Iz Disfx Akmjdc

Condition: used, Year of construction: 2005, General Information: - Model: ROBODRILL α-T2 STAMA - Serial Number: 046VH155 - Year of Manufacture: 2005 - CNC Controller: FANUC (Model A04B-0094-B111#BD) - Weight: 2200 kg - Power Supply: 200 V, 50/60 Hz, Three-phase - Power Consumption: 10 kVA ----- Machining Capabilities: - Operations: - Milling (high-speed and high-precision milling) - Drilling - Rigid tapping ----- Axis Travel: - X-axis Travel: ~500 mm - Y-axis Travel: ~400 mm - Z-axis Travel: ~330 mm ----- Spindle: - Spindle Taper: BT30 - Standard Spindle Speed: up to 10,000 rpm ----- Tool Changer: - Type: Automatic tool changer - Tool Change Time: ~1.6 seconds ----- Rapid Traverse Rate: - Rapid Traverse Speed: 54 m/min on X, Y, and Z axes ----- Key Features: Ndjdpfxouru I Re Akmoc - Compact structure for high rigidity - High productivity with ultra-fast drilling and tapping cycles - Easy maintenance (integrated FANUC diagnostic interface) - Compatibility with automated production cells (co-branding with STAMA)

Condition: used, Klebebindegerät / Fanbinder Schmedt  PräColl HHS 11RR Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ndedpfjtzc N Iox Akmsc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1996, condition: ready for operation (used), CNC control system FANUC, model 15TF. Complete control unit with axis controllers for X and Z axes, for CNC lathes. Nedpogqucpofx Akmsdc

Year of construction: 2026, condition: new, SMW 600 — Plastic Pulverizer with Vibratory Sieve Industrial Rotor Knife Pulverizer for Fine Grinding of Plastic Materials The SMW 600 Plastic Pulverizer is designed for fine grinding of thermoplastic materials, including PVC, PE and PP. The machine features a high-speed rotor with rotating and stationary knives made of high-quality hardened steel. Grinding is achieved through impact, friction and centrifugal force. Fine particles are discharged by airflow, while oversized particles remain in the grinding chamber for further processing. The combined air and water cooling system reduces operating temperatures and prevents material overheating. The complete system includes a feeding hopper, belt conveyor, pneumatic conveying system, dust collector and vibratory sieve for powder classification. 1. General Technical Specifications * Model: SMW 600 * Type: Rotor Knife Plastic Pulverizer * Materials: PVC, PE, PP * Capacity: 100–300 kg/h * Output Particle Size: 30–80 mesh * Maximum Feed Size: 15 mm * Rotor Diameter: 590 ±1 mm * Rotating Knives: 26 pcs * Stationary Knives: 14 pcs * Main Motor: 55 kW * Motor Speed: 2950 rpm * Pneumatic Conveying Fan: 5.5 kW * Rotary Valve Motor: 0.75 kW * Vibratory Sieve Motor: 0.75 kW * Cooling: Air and water * Dimensions (L × W × H): 3800 × 2900 × 2150 mm * Weight: 2400 kg Capacity depends on the processed material, required particle size and operating conditions. 2. Grinding System The high-speed rotor operates with 26 rotating knives and 14 stationary toothed knives. Material is ground through impact and friction. Oversized particles remain inside the grinding chamber until the required particle size is achieved. The grinding chamber features an opening cover for easy inspection, cleaning and knife maintenance. 3. Automatic Feeding System Ndsdpfxoz Rphno Akmoc The feeding hopper and belt conveyor provide continuous material feeding into the pulverizer. * Feeding Method: Automatic belt conveyor * Maximum Feed Size: 15 mm 4. Cooling System The combined air and water cooling system maintains stable operating temperatures during grinding. * Cooling: Air and water * Water Inlet Temperature: Max. 25°C * Water Outlet Temperature: Max. 50°C 5. Pneumatic Conveying & Dust Collection The ground material is transported by airflow to the collection system. The system includes a pneumatic conveying fan, rotary valve, material collector and fabric dust filter. * Fan Power: 5.5 kW * Rotary Valve Motor: 0.75 kW * Dust Collection: Fabric filter 6. Vibratory Sieve The vibratory sieve separates the ground plastic powder according to particle size. * Type: Circular Vibratory Sieve * Diameter: 1000 mm * Motor Power: 0.75 kW * Application: Plastic powder classification Applications: Fine grinding of PVC, PE, PP and pre-crushed plastic waste for recycling and reuse in plastic manufacturing.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Njdpez R T Elefx Akmsdc Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Year of construction: 2024, condition: new, Overview - of the various variants *not every item is required: Optional: - Bale opener MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Ndedpfx Aksff Sbismjc Individual price net from €14,750 - demonstrator - Dust extraction auger - length approx. 4 m Four sieves are mounted on the underside, which are vacuumed. Individual price net from: €9,750 - Suction parts / hoses as a package €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator dust extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³ /400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with +/- 20 kg from €67,550 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Performance: approx. 30 bales per hour Hopper capacity approx. 0.7m³ Level sensors for min./max. fill level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek balers / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded Miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The baler compresses the material fed into the hopper without the addition of binding agents by means of hydraulic pressure and packages the material in plastic sacks. The volume of the material can be significantly reduced with the baler. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry matter. The hopper of the mütek baler can be loaded automatically or by hand and has a volume of approx. 0.7 m³. Containers with a larger volume or with an integrated extraction and filter system as a complete disposal unit are also available. In addition to the automatic filling via dust extractor, mütek also offers filling by means of conveyor screws. In both variants, automatic dust extraction is possible. mütek balers are equipped with a control cabinet for operation. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry matter) - maximum 35 mm long

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 Nedpfxjhby Rio Akmedc noice level 72,0 dB(A) weight 248 kg

Condition: new, Year of construction: 1988, For sale: a mobile industrial fan from the times of the GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), with a 0.75 kW motor from the USSR. Robust steel construction on wheels – ideal for dust extraction, blowing, local ventilation, or cooling machines. Technical specifications: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Maximum operating temperature: 35°C • Year of manufacture: not fully determined – probably 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Made in: USSR Nedpfx Akez Sb Dfjmjdc Advantages: • Compact and mobile design • Efficient drive, ready for operation • Suitable for workshops, paint shops, ventilation, and burners.

Condition: excellent (used), SEVA SEV-200M three-phase electric motor A powerful industrial electric motor designed for driving machines, pumps, fans, compressors, and other industrial equipment. Technical data: • Manufacturer: SEVA • Type: SEV-200M • Power: 30 kW • Voltage: 400/690 V • Rotational speed: 2950 rpm • Frequency: 50 Hz • Current: 52.7 A / 30.4 A • Protection class: IP55 • Insulation class: F Ndodpfxjz Sm E Uj Akmjc • Operating mode: S1 • Shaft: approx. 55 mm • Multi-groove pulley included Condition: Used item. Shows normal signs of use and storage. Visual condition matches the photos.