Used Fanuc Robocut for sale (799)

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: M-10iA/6L R-30iA, load capacity: 6 kg, arm reach: 1,632 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a comprehensive 77-Point Protocol evaluation conducted by our in-house robotics engineers. Gbodpfx Ahsx Thwks Hsg Brand: FANUC Model: M-10iA/6L Controller: R-30iA Payload: 6 kg Reach: 1632 mm Robot weight: 135 kg This compact yet powerful robot weighs only 135 kg, but delivers a 6 kg payload with extended reach and the highest wrist moments and inertia in its class. Dress-out and cable/airline routing are significantly simplified due to the 50 mm hollow wrist and upper arm, resulting in reduced system costs and increased reliability. The M-10iA can be mounted on the floor or wall at any angle, or suspended from the ceiling. The J3 axis can flip over, allowing the robot to work behind itself and create a very large working envelope. Delivery time: By mutual agreement IRS Robotics® Refurbished Standard: 77-Point Protocol – fully tested on our in-house test benches, new oil/grease, new batteries, fully cleaned, repainted in your preferred RAL colour. Includes accuracy status measurements (repeatability, accuracy, backlash). About us: Our daily core business is the supply of refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. Worldwide shipping available.

Condition: used, Year of construction: 2015, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" Gbsdpfx Aeugpk Ujh Hsg *

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15_186_300, overall weight: 8,030 kg, controller manufacturer: Fanuc, type of input current: three-phase, total length: 2,450 mm, total width: 5,500 mm, total height: 2,900 mm, For sale: FANUC dual-station welding cell 2xTIG with wire feeder. TIG welding method with wire feeding. Everything is fully functional and ready for use. Gedsxhckrepfx Ah Hsbg

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: P177ZG753, Technical characteristics: # Machining Workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis Description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis (A-axis) with index dividing head, direct angular measurement system, number of revolutions 50 min⁻¹, accuracy +/- 5" # A-axis Swivel Range: +/-170˚ # Maximum Clamping/Workpiece Dimensions: 650 x 400 mm; max. weight 300 kg # Rapid Traverse: X/Y/Z 54 m/min Gjdpfxsxxt Eho Ah Hebg # Spindle Speed: 100–10,000 rpm, spindle motor power 11 kW # Spindle Taper: BBT30 (with internal cooling) # Automatic Tool Changer: 1x21 tools, chip-to-chip average time 1.5 sec # Maximum Tool Size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 m (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideal for precision machining, this vertical machining centre offers robust performance and reliability. # CNC Control: Model 31i model b5 # 4th axis and tailstock: Fanuc DDR-TiB 178DU039 2017/08 and TSUDAKOMA tailstock # Chip extractor & coolant filtration unit max. 40 bar: Mosnic model 1641/2010 # Spindle, Guideways, and Electrical Cabinet Cooling Systems # Oil Vapor Absorption/Recovery System: Bristol model B 1000 EF # Fire suppression: Kraft & Bauer # Part presence detection: with low pressure air sensors # Automation: Lateral door automatic and interface ready for automation # In-process inspection: Renishaw TRS2 # Documentation: incomplete Machine condition: NOT WORKING # Hydraulic unit defective # Two emulsion pumps # Guideway lubrication pump # Safety switch Euchner

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B400 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm Gbedpfxswvfgno Ah Heg -Dimensions: 360/175/280 mm -Weight: 30 kg

Condition: like new (used), functionality: fully functional, Fanuc A06B-0501-B205#7000 AC servo motor Spare parts for sale Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: Godpfx Ahov Ah Ive Hsbg - packed in wooden box - ex Works - excl. delivery cost #Servo motor #drive motor

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00557, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 Godex Sdxnspfx Ah Hobg RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: excellent (used), Year of construction: 2019, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: Fanuc RB-A, nominal power (apparent): 11 kVA, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,600 h, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 220 V, type of input current: three-phase, Equipment: chip conveyor, FANUC ROBODRILL α-D21iB5 Vertical Machining Center, year of manufacture 03/2019. Commissioned in 2020. Spindle speed: 10,000 RPM. Operating hours: 17,200 h, spindle hours: 13,600 h. The milling machine is equipped with a DDR-T 4th axis rotary table, two independent Schunk pneumatic vices, a Renishaw workpiece probe and tool probe, automatic front doors, automatic side doors, chip flushing system, high-capacity coolant tank, chip conveyor, and oil mist filter. The machine has been operated exclusively in our company since new. Condition: very good. The machine can be inspected in operation – it is still in daily use. Type: ROBODRILL α-D21iB5 Catalogue No.: A04B-0120-B133#BHB Serial No.: P193ZH375 Production date: 2019-03 Weight: 2,300 kg Gbsdpfsx Rqkuox Ah Heg Power supply phases: 3 Voltage: 200-220 V Frequency: 50/60 Hz Power consumption: 11 kVA SCCR: 2.5 kA EMC class: EN55011 Group 1 Class A If you have any questions or require further information, please feel free to message or call us.

Condition: used, Year of construction: 2012, operating hours: 30,363 h, functionality: fully functional, machine/vehicle number: R12X01887, overall weight: 1,170 kg, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: Fanuc, controller model: R-30iA, repeat accuracy: 0.2 mm, Equipment: documentation/manual, We are offering this used FANUC R-2000iB/165F industrial robot / Type: A05B-1329-B201, year of manufacture 2012. Gjdpfx Aex Sq Icsh Hsbg Manufacturer: FANUC Model: R-2000iB/165F Year of manufacture: 2012 Condition: used Nameplate number: A05B-1329-B201 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: P17XZG 044, Technical characteristics: # Machining workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis A (indexing divider head) with direct angular measuring system, max. rotational speed 50 rpm, precision +/- 5 seconds # Axis A swivel range: +/-170˚ # Maximum clamping/workpiece dimensions: 650 x 400 mm; max. weight 300 kg # Rapid traverse speed (X/Y/Z): 54 m/min # Spindle speed: 100–10,000 rpm; spindle motor power: 11 kW # Spindle interface: BBT30 (with through-spindle coolant) # Automatic tool changer: 1x21 tools / chip-to-chip average time 1.5 sec # Maximum tool size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideally suited for precision machining, this vertical machining center delivers robust performance and high reliability. # CNC control: FANUC Series 31i-B5 # 4th axis and tailstock: FANUC DDR-TiB 178DU039 (2017/08) and TSUDAKOMA tailstock # Chip conveyor & high-pressure coolant filtration unit (max. 40 bar): Mosnic model 1641/2010 # Spindle cooling system, guideways and control cabinet cooling # Oil mist extraction/recovery system: Bristol model B 1000 EF # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # Automation: automatic side door and interface, automation-ready # In-process control: Renishaw TRS2 Gedpjxxrb Isfx Ah Hobg # Documentation: incomplete Machine status: WORKING

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor Gbodpfxowvfa Is Ah Heg -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-1513-B200 -Power: 26 to 45 kW -Speed: 1500 to 6000 rpm -Technical data: see photo type plate -Shaft: Ø 60 x 140 mm -Dimensions: 880/320/H410 mm -Weight: 286 kg

Condition: excellent (used), Year of construction: 2012, Fanuc M20iA Robot, Complete with R30iA Year of manufacture: 8/2012 Controller: R30iA Number of axes: 6 Max. payload: 20 kg Max. working range: approx. 1811 mm Profibus Scope of delivery: Robot, controller, cables, teach panel, operating manual, wiring diagrams 2-week commissioning guarantee. No further warranty. In addition, spare parts are always available from stock. The robot is fully operational and can be inspected on site. Gbjdpjx Tdv Nsfx Ah Hsg Loaded free / ex works.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00558, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Gbodpfxox R Tpyo Ah Hog Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, Year of construction: 2019, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: Fanuc RoboDrill B, nominal power (apparent): 11 kVA, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, input voltage: 200 V, type of input current: three-phase, FANUC Robodrill α-D21iB5 Vertical Machining Centre, year of manufacture 07/2019. Commissioned in 2021. Total operating hours: 16,000 h, machining hours: 12,300 h. Used exclusively in our company since new. The milling machine is equipped with a 4th axis DDR-t rotary table featuring two independent Schunk pneumatic vices, a tool probe and a Renishaw workpiece probe, chip flushing system, automatic front doors, oil mist extractor, chip conveyor, and a high-capacity coolant tank. The machine is in continuous operation. Inspection under power possible. Condition: very good. Type: FANUC ROBODRILL α-D21iB5 Serial number: A04B-01213B#B Year of manufacture: 2019-07 Gsdpfex Rqfrjx Ah Hsbg Weight: 2,300 kg (machine only) Power supply: 3~ Rated power: 11 kVA Supply voltage: 200–220 V Frequency: 50/60 Hz EMC standard: EN55011 EMC group: 1 EMC class: A SCCr (Short-circuit current rating): 2.5 kA If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor Gbodpfewvfgzex Ah Hjg -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B100 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 320/175/280 mm -Weight: 23 kg

Condition: excellent (used), Year of construction: 2012, Fanuc M710iC/20L robot, complete with R30iA Year of manufacture: 6/2012 Controller: R30iA Number of axes: 6 Max. payload: 20 kg Max. working range: approx. 3110 mm Godpfx Ahex Tdu Se Hobg Profibus Scope of delivery: Robot, controller, cables, teach pendant, operating manual, circuit diagrams 2 weeks commissioning warranty. No further warranty provided. Spare parts are continuously available from stock. The robot is fully functional and may be inspected. Loaded free / ex works.

Condition: good (used), Power supply module, servo amplifier module, CNC control system, plug-in card, -Manufacturer: FANUC Gbsdpowrx Nzefx Ah Hjg -Type: A06B-6150-H075 -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fanuc M710iC/50 Robot, complete with R30iA Year of manufacture: 7/2006 Controller: R30iA Number of axes: 6 Max. payload: 50 kg Gbedpox Tdpvjfx Ah Heg Max. working range: approx. 2050 mm Profibus Scope of delivery: robot, controller, cables, teach pendant, operating manual, wiring diagrams 2-week commissioning warranty. No further guarantee. Spare parts are continuously available from stock. The robot is fully functional and can be inspected on site. Loaded free/on ex works.

Condition: good (used), Year of construction: 2011, Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Fanuc, Operator Panel -Type: Oi-TD -MDI Unit: A02B-0319-C125 -Interface: A02B-0319-B500 -Operator Panel: A02B-0319-C243 -Individual components: see photos -Shipping/Price: complete -Transport dimensions: 1340/900/H390 mm Gjdpfxswrciro Ah Hsbg -Weight: 64 kg

Condition: good (used), Servo amplifier module, servo amplifier module, CNC control system, plug-in card, Godjwrx Hmspfx Ah Hebg -Manufacturer: FANUC -Type: A06B-6127-H209 -Dimensions: 90/380/H310 mm -Weight: 6.2 kg

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 Gbedpfoi Sdf Hsx Ah Hjg -Type: A06B-6110-H015 -Number: 2x servo modules available -Price: per piece -Dimensions: 285/90/H380 mm -Weight: 4.9 kg/pc.

Condition: good (used), Servo Amplifier Module -Manufacturer: FANUC Gbsdpfxeb U Ufxj Ah Hjg -Type: A05B-2400-C060 -Number: 1x converter available -Dimensions: 380/120/H190 mm -Weight: 2 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H422 H423 -Number: 2x servo module available -Price per piece -Dimensions: 500/260/H155 mm Gedshtryispfx Ah Hsbg -Weight: 6.6 kg

Condition: good (used), Year of construction: 2012, Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I Gsdpfxjkahi Hj Ah Hebg -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, DC motor, stepper motor, spindle motor, AC servo motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B000 -Shaft: Ø 18/13 x 30 mm Gbjdpfx Ajkm Rm Rsh Heg -Technical data: see photo of the nameplate -Number: 2x servo motors available -Price: per piece -Dimensions: 280/130/H165 mm -Weight: 12.9 kg/pc.