Used Fehlmann Picomax 51 Cnc for sale (47)

Condition: excellent (used), Digital display Heidenhain Type: conventional Table KS 320 D Clamping surface: 530 x 270 mm Speed: 125 - 4400 rpm Feed: 0.03 – 0.40 mm/rev Drilling capacity in steel: 22 mm Thread cutting up to M16 Milling capacity in steel: 25 mm Drill spindle stroke: 120 mm Ibodpfsyv Af Ujx Aiyeb Spindle motor power: 0.51 / 1.47 kW Dimensions: 2000 x 1200 x 1000 mm Weight approx. 900 kg

Condition: used, Year of construction: 2008, Control Heidenhain iTNC 530 x-travel 705 mm y-travel 425 mm z-travel 610 mm Feedrate X-,Y-,Z,- axis 1 - 20.000 mm/min Feed force X-, Y-, Z-axis 12.000 N table surface area 1.260 x 460 mm T-slots (number x width x distance) 9 x 12-H8 x 50 mm 400 kg Distance between floor and coordinate table 1.026 mm Distance between coordinate table and spindle nose 92 - 702 mm Horizontal outreach 480 mm spindle tunring speed 50 - 26.000 U/min drive capacity - main spindle 100/40% ED 11,5 / 15,0 kW Max. torque S1/S6 25,2/32,9 tool taper HSK-E50 number of tool places 28 Pos. max. tool diameter 63 mm max. tool-dia with free toolbox 100 mm tool length 260 mm weight of tools 3 kg output 22 kVA weight ca. 5.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation Ibsdpfx Aozq Hkhjiysb - FEHLMANN ATS 160 CNC dividing head Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, 1 piece of drill chuck, ALBRECHT, clamping range up to 10 mm 2 pieces of Morse taper with driving lugs, MK 1 2 pieces of collet chuck with cap nut, ER 11, length 70 mm 1 piece of collet chuck with cap nut, ER 11, length 40 mm Isdjzvyphspfx Aiyebb 1 piece of milling chuck, shank 20 mm

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Iedpfxey H I Eus Aiyobb

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, table width: 380 mm, table length: 920 mm, overall weight: 3,750 kg, spindle speed (max.): 36,000 rpm, spindle motor power: 17,800 W, number of slots in tool magazine: 28, number of axes: 5, This 5s FEHLMANN PICOMAX 60 HSC vertical machining centre was manufactured in 2008. It features a table size of 920x380 mm and offers impressive spindle speeds of up to 36,000 rpm. With a robust weight of 3750 kg, this machine is designed for precision and durability. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 60-HSC machine we have for sale. Contact us for further details. • Table size: 920x380 mm • Feed Rate Range: 1 - 20,000 mm/min • Spindle replaced in 2015 Iodpfx Aisyizpdsyebb • Software Options: Option 1 (Rotary table machining, cylinder contour programming, swiveling plane), Option 2 (3D machining, TCPM, 5-axis linear/spline interpolation) - CNC Dividing Unit: ATS 160 CNC-SDK (automatic CNC dividing and swiveling unit, 2-axis simultaneous interpolation) - Workpiece Loading System: EROWA EasyHand with 60 ITS50 holder capacity (Max workpiece dim: D 172 x 320 mm) - Process Monitoring & Measuring: Renishaw MP 40 3D touch probe, Renishaw NT laser system for tool measuring (D 0.15 to 63 mm) - Dust/Graphite Extraction System: Industrial dust extractor Type 16.2.5 (3.1 kW turbine, 1,680 m³/h capacity, 100 l tank) - Additional Equipment: Enclosure with sliding doors & polycarbonate windows, enclosure top cover, minimal quantity lubrication system, oil mist extraction, switch cabinet cooling device, chip tray, coolant spray gun, handbox Technical Specification Taper Size HSK 50

Condition: ready for operation (used), Year of construction: 2003, operating hours: 56,146 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, overall weight: 5,100 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis FEHLMANN Picomax 90-M was manufactured in 2003. It features a maximum spindle speed of 18,000 rpm and a table size of 920 x 380 mm. The machine offers impressive X-axis travel of 700 mm, Y-axis travel of 420 mm, and Z-axis travel of 610 mm, accommodating a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FEHLMANN Picomax 90-M vertical machining centre we have for sale. Contact us for further details. • Table size: 920 × 380 mm • Distance between table and spindle: min 94 mm / max 704 mm • Max. workpiece weight on table: 250 kg Ijdozlhu Ropfx Aiysbb Additional equipment • Dividing head, 4th and 5th axis: FEHLMANN ATS 160

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : ISO30 - Spindle speeds : 18000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 705 / 425 / 610 [mm] A ROTARY AXIS - Travel : 360 [°] (+/-) - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : +180/-5 [°] (+/-) Ijdpfouhb A Ejx Aiyebb - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 TABLE - Table dimensions : 1260 x 490 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2300 [mm] - Machine height : 3000 [mm] - Machine weight : 5100 [kg] EQUIPMENT - CNC : iTNC 530 - Electronic handwheel - Type of divisor : 4e-5e axe intégré * manufacturer : Fehlmann * model : ATS 160 CNC * clamping diameter : 300 [mm] * center height : 160 [mm] * tightening type : Pneumatique - Coolant tank * with high-pressure pump - Oil mist extractor - Spindle cooling unit - Workpiece probe : Renishaw OMP 40-2 - Electric transformer

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) Ijdpfxofrbtdo Aiysbb cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Iodpfey Ny A Dsx Aiyobb Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel Isdpfsy N Du Dox Aiysbb - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Many accessories Ibjdpfxeq R Rb He Aiyob

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes Ibsdpfxowmwrdo Aiysb SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 14008455, Fehlmann Picomax 54 model with Heidenhain TNC 320 control, in very good condition. Technical specifications: - Year of manufacture: 2008 - Travel in X, Y, and Z axes: 500/260/480 mm - Travel of the drilling spindle: 160 mm - Table dimensions (L x W): 880 x 320 mm - Maximum table load: 250 kg - Distance from table to spindle nose: 0 - 605 mm - Feed rate in X/Y: 1 - 2000 mm/min - Feed rate in Z: 1 - 1200 mm/min Ibodszgwiyjpfx Aiyjb - Rapid tool change system: SF 32 - Spindle speed range, infinitely variable: 7100 rpm - Machine dimensions (W x D x H): 1850 x 2550 x 2400 mm - Weight: 2150 kg Accessories: - Heidenhain TNC 320 control - 4th axis with tailstock and Rohm 140mm 3-jaw chuck - Various holders - Microscope - Heidenhain probe - Machine lamp - Cooling system

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: Ibedjyu Snzspfx Aiysb >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm Ibjdpfx Aioukf Ncoyeb >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Working travels 700 x 420 x 610 mm Table size 1260 x 490 mm Spindle taper HSK E50 Spindle speeds 50-36'000 U/min Tool changer 42 Pos. Control HEIDENHAIN iTNC 530 Ibjdpfx Aexpud Hsiyjb 3D measuring tracer Tool breakage control Tool length and diameter measuring device MARCELS MASCHINEN CH

Condition: good (used), Table size 420 x 250 mm. Speeds: electronically controlled, stepless via potentiometer, 132 - 4500 rpm. Isdpfeyywn Ejx Aiyobb

Condition: excellent (used), Control: Heidenhain TNC 124 Ibedsyvrfdspfx Aiyeb Travel paths X/Y/Z: 500/250/160 mm Travel path W: 480 mm Clamping area (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 15507225, functionality: fully functional, operating hours: 9,980 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 32, rotational speed (max.): 20,000 rpm, rotational speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 420 mm Iodpfxsyznvcj Aiyjbb Travel Z-axis: 610 mm Feed rates: 1 - 20 m/min Machine pallet Pallet dimensions: 1,260 x 490 mm T-slots: 9 x 12H8, 50 mm spacing Max. spindle speed: 50 - 20,000 rpm Tool system Tool holder: SK30 Number of tools in magazine: 32 MACHINE DETAILS Control: HEIDENHAIN iTNC 530M Dimensions & Weight Dimensions / Weight: 2,500 x 2,560 x 2,700 mm Installation dimensions: 4,300 x 2,950 x 3,012 mm Weight: 5,100 kg Connected load: 22 kVA Operating hours Spindle hours: approx. 9,980 h Control on-time: 78,165 h Machine on-time: 91,869 h Program run time: 54,682 h EQUIPMENT 3D touch probe, infrared Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with dual dispenser FEHLMANN HSC settings (Cycle 327) Note: The clamping devices and tools shown in the images are not included in the scope of delivery.

Condition: excellent (used), HEIDENHAIN iTNC 530 HSCI control Working travels 875 x 700 x 450 mm A-axis table swivelling +/- 115° C-axis table turnable 360° Spindle taper HSK 63 Spindle speeds 50-20'000 rpm Tool changer 390 positions Robot for workpiece loading GOODJ WHS+ with approx 40 paletts 3D measuring tracer Laser tool setting system Misc. accessories Ibodpfx Aijzz I Eboyeb MARCELS MASCHINEN AG

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Iodpfx Aijuy Sazoyjbb Digital read-out Accessories MARCELS MASCHINEN CH

Condition: excellent (used), Drilling capacity -18 mm Spindle taper FEHLMANN Spindle speeds 135-4500 rpm Ibjdpjlyrcmofx Aiysb Throat 225 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH