Used Ff Compressor for sale (5,625)

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Fpedpfx Aaozb Drxstjl

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Fodoxbdppjpfx Aatopl

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Fodpfxjzww H To Aatjpl

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Fsdpsv Rmmmofx Aatepl

Condition: like new (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, Premium used Atlas Copco GA90 90 kW Fpedpfx Ast E I D Ejatsl 7.5 bar 16.21 m3/min Only 11,118 operating hours!

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, total length: 2,000 mm, total width: 800 mm, total height: 1,850 mm, power: 15 kW (20.39 HP), volume flow: 147.6 m³/h, operating pressure: 8 bar, noise level: 73 dB, Equipment: refrigerant dryer, We are offering this Champion FM15 screw compressor in like-new condition, manufactured in 2020. Manufacturer: Champion Fpsdpfjzwxnlex Aatel Model: FM15 Year of manufacture: 2020 Less than 500 operating hours. Engine power: 15 kW Air flow at 8 bar: 2460 liters/minute Noise level: 73 dB(A) Pressure tank: 500 l Dimensions: 2000x800x1850 mm DRYTEC MDD-100 air dryer with approximately 1000 operating hours. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Fpsdpszmub Tjfx Aatjl

Condition: good (used), Year of construction: 2007, functionality: fully functional, overall weight: 519 kg, total length: 700 mm, total width: 1,800 mm, total height: 1,400 mm, power: 30 kW (40.79 HP), volume flow: 274.8 m³/h, operating pressure: 13 bar, Used, in good condition. Technical details: - Overall dimensions: approx. 1,800 x 700 x 1,400 mm (W x D x H) - Motor power: 30 kW - Pressure version: 13 bar - Operating pressure: 12.8 bar - Volume flow: 4.58 m³/min - Rated speed: 7,200 r/min - Frequency: 50 Hz Fpodpfxsy Ruz Re Aatjl - Weight: approx. 519 kg

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch Fpjdpfx Aaezy Dzijtol - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Fodpfxszzp N Ie Aatspl Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 with refrigerated dryer Features and Technical Specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i Fjdpezk Nqkofx Aatspl - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage - Dimensions: 750x705x1800 mm - Weight: 170 kg With DK 985 Eco refrigeration dryer: - Airflow at pressure dew point 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: available shortly Storage location: DE-63934 Röllbach

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Fpsdpfsyxpz Usx Aatjl

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Fjdpfezudabex Aatopl Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: excellent (used), Year of construction: 2016, PROD. ATLASCOPCO TYPE GA55 FF PLUS S/N API623768 YEAR 2016 POWER (kW) 55 CAPACITY (m3/min) 10.44 PRESSURE (bar) 8.25 HOURS (RUNNING/TOTAL) Fpodpfx Aszmhtcoatsl FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.05kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Power supply: 400 V / 50 Hz Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg. Fodpfxjzy Hrko Aatopl

Condition: used, Year of construction: 2011, Colour: Blue Empty weight: 1.800 kg Dimensions (LxBxH): 235 x 124 x 199 cm - Details: - └ Description: 48,000 operating hours - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: CD10007783001 - Transport dimensions: 2350mm x 1240mm x 1990mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Fodpfx Asyvr E Djatjpl

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Specifications: Fpedpszkvb Nefx Aatel Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, Screw compressor GA132VSD Atlas Copco Integrated frequency converter Fodpfex Rwz Tex Aatjpl 132 kW 8.5 bar 26.06 m³/min

Condition: used, Year of construction: 1999, functionality: fully functional, operating pressure: 10 bar, We offer this used Ceccato RL 40/10 reciprocating compressor, manufactured in 1999. If you have any questions or require further information, please do not hesitate to send us a message or call us. Fedpfxezxna He Aatspl

Condition: good (used), Schneider Compressor 670-270 ST used, including refrigerant dryer Tank volume 270 liters Suction capacity 670 liters/min Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Motor power 4.0 kW / 400V Fpedozzclpspfx Aatol Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Fsdpfxozu Aw Es Aatspl Weight: 500 kg Includes refrigerant dryer.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW Fsdozhu Naepfx Aatopl 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 Fpsdpfoylwlmex Aatsl OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 90 kW Fpodpfx Aasy A Nwkjtel 7.5 bar 16.87 m3/min Year of manufacture: 2015 Operating hours: 65,031

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Fodpfx Aaoxx Snbstepl Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING