Used Emcomat 7 for sale (26,711)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition. Todj Afxm Uopfx Airod

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, machine/vehicle number: 3601, center height: 170 mm, center width: 700 mm, overall weight: 755 kg, The machine is functional, but has a minor transmission defect, which is noticeable through unusual noises. Therefore, the machine is being offered for sale as requiring repair! Tsdpfxs Aazk So Airsd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A very well-maintained machine, originally used for vocational training, with a digital display and good accessories. The machine is connected. Tsde Aa Ic Uspfx Airjd

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Tedpfxjywfrts Airod

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs * Tjdpfx Aieu Ixw Aered

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, JUKI PLC-2760-7 Post-Bed Heavy Duty Sewing Machine on Kessler Stand (2011) Machine Specifications & DetailsCategory: Textile & Leather Machinery / Industrial Sewing Machines Manufacturer: JUKI CORPORATION (Made in Japan) Model: PLC-2760-7 Year of Manufacture: 2011 Teds Ahfi Eopfx Aired Serial / Mfg. No.: 2P0GK00038 Type: Post-bed, twin-needle / heavy-duty industrial lockstitch sewing machine Table / Stand: Original heavy-duty KESSLER ergonomic stand with wheels and pedal assembly Condition: Used, fully functional, clean, and in very good working condition JUKI PLC-2760-7 High-Performance Post-Bed Industrial Sewing Machine We are offering a high-grade Japanese industrial post-bed sewing machine, JUKI PLC-2760-7, manufactured in 2011. Ideal for medium to heavy-duty materials, upholstery, automotive interior manufacturing, leather goods, and specialized 3D sewing operations. Key Features & Equipment:Manufacturer: JUKI Corporation (Made in Japan) Model: PLC-2760-7 Year of construction: 2011 Post-bed design for effortless handling of 3D, shaped, and bulky workpieces Mounted on a high-grade Kessler ergonomic industrial stand with caster wheels for easy mobility Equipped with foot control pedal and control unit Automatic functions (-7 sub-class specification) Condition & Inspection:Well-maintained, clean, and ready for production. Located at our warehouse, available for inspection and test run under power by appointment. Worldwide shipping and professional palletizing/packaging available upon request. Please feel free to contact us for pricing, further technical inquiries, or shipping quotes.

Condition: reconditioned (used), Year of construction: 1994, operating hours: 27,545 h, functionality: fully functional, machine/vehicle number: 3701104, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 5,000 rpm, quill stroke: 60 mm, spindle mount: MK 0, total height: 2,000 mm, total width: 2,500 mm, total length: 2,000 mm, table width: 475 mm, table length: 700 mm, type of input current: three-phase, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,000 kg, input voltage: 380 V, workpiece weight (max.): 300 kg, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 25 A, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained milling machine from a training center, equipped with a HEIDENHAIN TNC 415B control system and an SK 40 milling spindle. It features a hydraulic clamping system and an automatic central lubrication system, and comes with technical documentation and an operating manual. Tedpe Ahfihsfx Airod

Condition: like new (used), Year of construction: 2014, operating hours: 58 h, functionality: fully functional, load capacity: 7 kg, arm reach: 800 mm, controller manufacturer: kuka, controller model: C4 Sunrise, teach pendant manufacturer: kuka, input voltage: 220 V, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: LBR iiwa 7 R800 Tsdo Ad Na Ajpfx Airjd MODEL YEAR: 2014 TECHNICAL SPECIFICATIONS PAYLOAD: 7 KG MAX. REACH: 800 MM CONTROLLER: KRC4 SUNRISE Operating Time (h): 58

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M .415619, total length: 5,600 mm, total width: 1,300 mm, total height: 1,950 mm, overall weight: 1,500 kg, GPE/100-7″-UV Automatic machine for printing with registration on travel mugs Tedpfx As Aazuqsired This machine is in excellent condition Also comes with a set of jigs to print the travel mug with an handle with the UV dryer Print cure instantly

Condition: good (used), Year of construction: 2017, Manufacturer / Model: Durst · Tau 330 Year / Serial No.: 2017 · Printing: 7 colors: Cyan, Magenta, Yellow, Black, Orange, Violet, and White Speed: 40 linear meters/minute, as specified Web Handling: Roll unwinder · Web guide · Splice table · Roll rewinder Treatment & Drying: Corona unit – revised 2026 · UV drying unit – revised 2026 Ink & Cleaning: Ink supply system · Low-migration ink · Automatic cleaning system Todpfx Ao Agwr Aoired Controls & Workflow: Main touchscreen monitor · PMS Webgui data processing · Insetting capability Inspection & Cooling: Inspection table · Chiller included

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Tedpfx Aezvvc Dsirod Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm Todpfx Aewag Steired >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, total length: 5,500 mm, total width: 2,700 mm, table width: 711 mm, table length: 2,134 mm, overall weight: 11,650 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS VF-7/40 TECHNICAL DATA: - Date of manufacture September 2014 Tjdpfx Aio Adzgzersd - X 2 134 mm - Y 813 mm - Z 762 mm - Control HAAS - Spindle speed max. 8 100 rpm - Table size 2 134 x 711 mm - Spindle nose to table 102 – 864 mm - Tool magazine 31 positions (SK40) - Spindle power 22.4 kW - Chip conveyor - Machine dimensions 5.5 x 2.7 x 3.3 m - Weight approx. 11 650 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) Todpfx Aoy Nxnrsirsd 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: excellent (used), Year of construction: 2009, Control: Emco Easycycle Working Area Travel in X: 450 mm Tedpfoyvrkasx Aired Travel in Y: 400 mm Travel in Z: 350 mm Table Clamping area (L x W): 800 x 400 mm Max. table load: 300 kg Spindle Speed range (stepless): 10 – 5,000 rpm Distance to table surface: 40 – 440 mm Tool holder: SK 40 Quill stroke: 80 mm Swiveling vertical milling head: +/- 90° Feed Feed range: 10 – 5,000 mm/min Rapid traverse X/Y/Z-axis: 2,000 / 5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Dimensions Dimensions (L x W x H): 1,980 x 2,030 x 1,990 mm Machine weight: 2,270 kg

Condition: used, Year of construction: 2017, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control Celos 840 D SL Operate Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW Torque 130 / 86 Nm tool taper HSK-A63 b - axis +-100 ° table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 120 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 67 kVA weight of the machine ca. 16,24 t dimensions of the machine ca. 8,0 x 5,6 x 2,9 m CNC - Travel Column Milling Machine DMG MORI - DMF 260 - 7 - NC tilting milling head (B-axis ±100°) - Balluff BIS C tool identification system -> One read/write head each at the tool loading/unloading station -> Evaluation unit -> CNC software -> Balluff chips NOT included! - incl. workspace partition - MPC (Machine Protection Control) - ATC (Application Tuning Cycle) - Dual changeover filter (25 µm) - Bed flushing / door flushing system (includes additional pump) - 2D surface feature (as an add-on to ATC) - EES (Extended Editing System) option Tedpfx Aie Afpziored - Provision for refilling the internal coolant supply (ICS) system - Provision for vacuum clamping - Clamping devices and machine vises NOT included!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning length: 1,000 mm, quill diameter: 50 mm, quill travel distance: 120 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (min.): 10,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, overall weight: 865 kg, spindle mount: MK 3, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, For sale is an EMCO EMCOMAT 20 D universal lathe with accessories! Top condition | Year of manufacture 1998 | Includes tool cassettes For sale is a high-quality conventional universal lathe, the EMCO EMCOMAT 20 D, from the renowned premium manufacturer EMCO GmbH. The machine is in very good condition and is fully functional. Thanks to its robust design, precise workmanship and modern 3-axis digital display, this machine is an excellent choice for anyone who values quality, reliability and precision. Manufacturer: EMCO Model: EMCOMAT 20 D Year of manufacture: 1998 Condition: very good, fully functional Location: Graz, Austria Distance between centers: 1000 mm Stepless speed control up to 3000 rpm 3-axis digital display for precise work Electromechanical spindle brake High stability due to 865 kg machine weight Electrical limit switches for safety monitoring Includes various tools and tool cassettes Technical data: Distance between centers: 1000 mm Tjdpfx Aijzkhvrorod Swing over cross slide: 200 mm Turning diameter: 400 mm Spindle bore: 50 mm Speed: up to 3000 rpm Spindle connection: DIN 55029 size 5 Drive power: 5.3 kW Tailstock: Tailstock quill diameter: 50 mm Mount: MK3 Stroke: 120 mm Dimensions and weight: Dimensions (L x W x H): 1950 x 1060 x 1635 mm Weight: approx. 865 kg Equipment: Modern 3-axis position display Display accuracy: 0.001 mm Coolant system Included in the scope of supply: - EMCO EMCOMAT 20 D - Various tools - Tool cassettes This machine impresses with the first-class processing quality, durability and precision typical of EMCO. The stable construction and integrated safety features make it an ideal solution for professional use. Are you interested? Inspection is possible by appointment. If you have any questions or would like a quote, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Tsdpfsz Ebzbox Airod Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, This robotic cell is used for tending an injection molding machine for insert molding. Tjdpoz N Iq Ejfx Aired

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156521, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Tedpfx Aiozwwkxsred Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021 Version 7.2.08 Last major maintenance including calibration: 02/2026 by Zeiss Condition: used / operational Machine type: Coordinate measuring machine AVAILABLE FROM WEEK 08/2027 Tjdpfx Aoz Duv Aeired The dismantling and transport are to be organized by the buyer. PLEASE NOTE THE TWO ATTACHED DOCUMENTS IN PDF FORMAT. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Power feed in sideways directions. Thread cutting possible, gear changes included. MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Tedpfx Aoz E Rymsirod Includes all accessories as shown in front of the machine. Contact us for shipping options! €2,650.00

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1300-7 /1.4 + Omnicore C90XT + TPU DEMO ROBOT DEVELOPED BY GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Tjdpfx Aiez Tacusrjd

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 ELECTRIC SPINDLE Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Tsdpfx Aoz Dpdueirod Maximum torque in S6 (Nm) 10.7 Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. Todpezwu Alefx Airsd # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH