Used Compressed Air Systems for sale (50,833)

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) Lhedpfexf Uuksx Adwob - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg Lsdjhalvdspfx Adwshb dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. Lodpfx Ajdzqn Uedwohb 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: ready for operation (used), System includes (1) Screw Compressor BOGE SF 75-2 (2) Cyclone Separator BEKO CLEARPOINT (3) Fine Filter BEKO CLEARPOINT (4) Refrigeration Dryer BEKO DRYPOINT RA eco (5) Catalytic Converter BEKO BEKOKAT CC 360 (6) Carbon Filter BEKO CLEARPOINT. Lhedpfx Adshvizgowob

Year of construction: 2019, condition: excellent (used), KAESER / TE 121 and BSD 72 Compressor system and dryer and with distribution system to machinery S-COM-005 Lhjdsvzhgiepfx Adwob TESEOAIR / HBS50 15 Bar Compressed air system HBS50 max 15 Bar - 220 Psi - Max 15 MPa S-COM-008

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW Lsdpjinur Ajfx Adwohb

Year of construction: 2021, condition: good (used), Motor output 7,5 kW Overall size ca. (L x B x H) 1.935 x 6 mm Weight ca. 447 kg Receiver 500 L Lhsdpfx Adjxzuxbjwob Max. pressure 13 bar

Condition: good (used), Year of construction: 1999, Refrigeration dryer Ljdpfx Aettwzbjdwjhb Manufacturer: KAESER Model: TE 121 Year of manufacture: 1999 Motor rated power: 2.1 kW Serviced by Kaeser. 21126ä

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Premium dryer with inverter Atlas Copco FD220VSD-G 13.20 m³/min. Lsdpjya Dn Dsfx Adwehb Year of manufacture: 2023

Condition: good (used), Year of construction: 2020, functionality: fully functional, Refrigeration dryer with condensate separator, year of manufacture 12/2020, capacity/volume flow: approx. 1.75 m³/min (≈ 105 m³/h / 1050 l/min), pressure dew point: typically +3 °C (under reference conditions), max. operating pressure: up to approx. 14 bar, dimensions: approx. 255×455×708 mm, weight: approx. 36 kg, in good condition. Price ex location. Transport available at extra cost! Ledpfx Aoybbggsdwohb

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank Lhjdpfx Ajya Dfiodwjb -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Ledexz Al Nspfx Adwjhb Power: 0.81 kW

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1373, volume flow: 2,400 m³/h, pressure (max.): 14 bar, KAESER TH451 SN: 1373 YEAR: 2014 CAPACITY: (kW) 5.9 OUTPUT: (m3min) 40 Lhodpfevr D I Rsx Adwjb PRESSURE: (bar) 14

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Lhsdpfx Adsx Sx U Dswob Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2008, volume flow: 3,096 m³/h, pressure: 29 bar, overall weight: 560 kg, Equipment: type plate available, PROD. - ATLAS COPCO TYPE - FD860 S/N - APF135144 YEAR - 2008 POWER (kW) - 8.3 PUMP. (m3/min) - 35 CIS (bar) - 29 Lhsdpfxsrivrpo Adwob

Condition: new, Year of construction: 2025, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. Ledpfx Aoxby D Ajdwshb A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Lhsdpfxemt Dcfs Adweb Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: new, Year of construction: 2025, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Lodexbzaljpfx Adwehb Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2025, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator Ljdpfemt Dcqex Adwjhb After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 95 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: Lodpfxsmt Dbho Adwjhb 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Lodpfxju Nz S Eo Adwjhb Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection *

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Ljdpfx Aeu Nz Tiedwjhb Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: good (used), functionality: fully functional, mileage: 99,000 km, power: 89 kW (121.01 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,030 kg, wheelbase: 2,530 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,399 mm, total width: 1,956 mm, total height: 1,953 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, sliding door, soot filter, start-stop system, traction control, ADDRESS: Straße 9, no. 33, 12309 Berlin-Lichtenrade (see last picture) Lhodpfxjyaryze Adwsb Multimedia with navigation Air conditioning Rear parking sensors Dual passenger seat, 3 seats Electric windows Electrically adjustable exterior mirrors Loading area with wooden floor Side paneling, incl. fastening rail Trade-in possible Delivery possible

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr Lhsdpfxed Atx Es Adwjb -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm Lhjdpfx Aohubdxodweb -Weight: 14.2 kg