Used Fit for sale (2,559)

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence - adjustable infeed fence, manually via counter - incl. kit for small parts - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ - Fixed stop side infeed: left, outfeed: left - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled Gsdpoy Thlzjfx Amhjiu - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 Gedpfjxfwfljx Amhoiu complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MACHINING CAPABILITIES: - Height (thickness) of useful Z-axis travel: 225 mm - Length of useful X-axis milling travel: 3860 mm - Width of useful Y-axis milling travel: 1930 mm - Work area: X = 3090 mm Y = 1530 mm Z = 85 mm, depending on the clamping system, see machine technical diagrams. - Maximum travel speeds: X-axis: 25 m/min Y-axis: 25 m/min Z-axis: 15 m/min MACHINE COMPOSITION: - Vacuum table with grooved length x width: mm Grid pattern with 30 x 30 mm grid spacing Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid) - 2 Vacuum pumps 250 m3/h - Chip evacuation mat - X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves (high-quality precision linear guides with automatic lubrication) • Milling/routing unit 10 kW - Tool holder connection type: HSK F63 - Variable speed 1000–24,000 RPM, controlled by a frequency converter Rotation direction: right/left The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic. Drive: HF 3-phase motor controlled by a frequency converter Bearing: ceramic Spindle cooling: by air - Extraction hood around the perimeter - On-board tool magazine, 11 positions - Maximum tool diameter: 100 mm - Maximum tool height: 153 mm - Distance between clamping jaws: 110 mm Please consult the machine configuration for more information on specifications. • DH 16 4H 2S Drilling unit: Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction. Gedpfx Aszcvvrjmheiu Independent operation of each spindle is possible. Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles. 1 double spindle in the X direction, 1 double spindle in the Y direction. • Control panel: - Windows PC - Programs (Software): F4 Design, F4 Nest OTHER FEATURES: - Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A - Installed power: 26kW - Pneumatic supply: 8 Bars - Average consumption: 350 Nl/min - Centralized extraction ports - CE standard marking Lockable disconnector switch, emergency stops

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 34,676 h, control type: CNC control, controller manufacturer: SIEMENS, laser type: CO₂ laser, laser source model: TRUMPG, laser hours: 18,409 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, working length: 6,000 mm, working width: 2,000 mm, cutting speed: 300 mm/min, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, The TRUMPF TruLaser 5060 is one of the most powerful large-format 2D laser cutting machines in the TRUMPF range, designed for processing large sheet metal (6,000 x 2,000 mm). Godpozb Agnsfx Amhsiu In this case, it is equipped with a 6 kW Truflow laser source. We also offer the option of retrofitting a TRUMPF CO2 laser with a FIBER laser, using a 6000W or 12,000W RAYCUS laser source.

Condition: used, mileage: 1,28,118 km, power: 110 kW (149.56 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,200 kg, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro3, Year of construction: 2008, Truck F. ATL Swap body lift truck Kamag Wiesel WBH 25 Engine damage! Engine has been running / little power Diagnosis Metal splinter in fuel filter and pre-filter Engine removed on pallet! Year of construction 2008 Unladen weight 8200Kg permissible total weight 18000Kg LxWxH 9300mm x 2550mm x 2900mm Euro 3 1st hand Kilometers according to previous owner 128118 Giodpfjqxuadsx Amhsu You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Working range X: 3120 mm Working range Y: 2160 mm Working range Z: 105 mm 4-axis electro-spindle (360-degree rotation), 15kW power Enclosed cable management system for movement along the X and Y axes Vertical drilling bits: 12 Horizontal drilling bits: 4 2 grooving blades: 1 in the X direction and 1 in the Y direction Tool magazine with 10 positions on the right rear side 8-position tool changer on the left side of the machine Three vacuum pumps, 3 x 250 m³/h Loading unit with lifting table on the machine inlet side Air conditioner for the electrical cabinet Centralized automatic lubrication system Godjy Sz U Tspfx Amhoiu Photoelectric safety barrier Angular gearbox with 1 output and WELDON attachment for screwed circular blade, Dmax = 240 mm H06-H10 CNC starter tool kit Includes 1 blade and HSK collet assembly with tools/cutters.

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range: 25 – 85 mm Gjdpfx Amswkgr Ijhoiu Vertical stroke of master gear slide: 40 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Maximum distance between centers for clamping of measured part: 200 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Standard master gear arbor, diameter: 12,7 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,707 h, travel distance X-axis: 3,090 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 85 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, CNC nesting machining centre manufactured in 2021. This FORMAT4 Profit H80 21.31 features a working area of 3090 x 2100 mm and a powerful 10 kW spindle with speeds up to 24,000 rpm. It includes an 8-spindle drilling head and a 15-position tool changer. If you are looking to get high-quality nesting capabilities, consider the FORMAT4 Profit H80 21.31 machine we have for sale. Contact us for further details. • Main spindle: HSK F63 • Drilling head: DH8 with 8 vertical spindles • Tool changer: 15-position, machine-mounted • Vacuum system: 2 pumps, total 500 m³/h; prepared for an additional 250 m³/h pump • Lubrication: Automatic central lubrication • Table/configuration: • Matrix grid table (phenolic resin) • Extended referencing system with front and rear stop rows • Side stops for flexible panel positioning • Electronic control of 2 stop rows • Control and software: • WoodFlash Control (on-machine station) • F4Nest basic package • Extension for rectangular nesting • Integrated label printing module for nesting • Excel/XML import for job list automation • Remote diagnostics / teleservice via Internet • Remote handheld control terminal • Automatic tool length measurement in Z-axis • Central extraction hood with controlled shutters • Electrical and pneumatic preparation for interpolated C-axis Godpfsy Drrtox Amhoiu • Condition/usage: • Operating hours: 5,500 h • Operation: Single-shift • Condition: Good technical condition • Service history: Regularly serviced by Felder (authorized service) • Availability: Can be started and demonstrated upon agreement • Notes: Operated using WoodFlash software; nesting optimization via F4Nest modules as listed above Additional equipment • Automatic pusher/offloading unit • Motorized pusher height adjustment • Integrated table cleaning/extraction during offloading • Mobile labeling station with thermal label printer • WoodFlash Control external station (1 external programming station)

Condition: used, mileage: 3,14,045 km, power: 55 kW (74.78 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, CO₂ emissions: 133 g/km, fuel tank capacity: 60 l, color: black, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,860 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, electric window regulation, full service history, General information Number of doors: 4 Model range: Mar 2012 - May 2015 Cab: single Technical information Torque: 185 Nm Number of cylinders: 4 Engine capacity: 1.560 cc Acceleration (0-100 kph): 16,6 s Top speed: 150 km/h Weights Empty weight: 1.350 kg Carrying capacity: 585 kg GVW: 1.935 kg Interior Interior: black Consumption Average fuel consumption: 5,1 l/100km (55 MPG) Urban fuel consumption: 5,9 l/100km (48 MPG) Extra urban fuel consumption: 4,7 l/100km (60 MPG) Condition Gedsy Skzispfx Amhsiu Number of keys: 2 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Driver's airbag - Electrically operated front windows - Immobiliser - Partition - Remote central locking

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration Giodpjpiqzkofx Amheu 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology 1 Tool changer HSK-A63 / 52 pockets Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Gedpfx Aerqg U Dsmheiu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Giedpfx Ajy Dcvvjmhju Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2014, condition: excellent (used), I sell the automatic magazine HOMAG BARGSTEDT Profi TLF210/21/10, year 2014. Storing 22 Positions of Material 2,80 x 2,10m Total size 21 x 10 m x h.3,5m. Stapel / Abstapelanlage 2 Posizionen. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Security fence system fully complete ! Gjdpfeyzcc Rox Amhoiu Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: new, machine/vehicle number: 824d4741dc933a94e9a7a7a8c, empty load weight: 5,600 kg, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Surface stone-repellent Splash guard behind last axle in asphalt version, attached to mudguard with hinge, with attachment option on top of mudguard, shortened mudguard Tow hook at the rear Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Gjdpfx Amsi Rix Seheiu Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Membrane rear wall Rear wall as pendulum flap, resting on the outside with 2-fold hook locking. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Insulated body, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marker

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation Gijdpfxsyux I Uo Amheu CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Condition: ready for operation (used), Year of construction: 1996, portalkran 50 ton 10meter Span Gsdpfsgggh Asx Amheiu

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview Godpfx Asyi U Elsmhoiu • DXF import capability • Parametric programming • Remote service package (internet-ready)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 5,540 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 350 mm, number of axes: 5, This 5-axis FORMAT4 Profit H500S 16.56 was manufactured in 2016. It features a large working area with dimensions X=5540 mm, Y=1570 mm, Z=350 mm, and is equipped with a 5-axis main spindle. The machine includes a drilling head with 12 vertical and 6 horizontal drilling spindles, a grooving saw unit, and a motor controlled via inverter up to 7,500 rpm. It also has two tool changers and a Becker vacuum pump. Contact us for more information about this machine. Godpfeygwxvsx Amheiu • Drilling head: • 12 vertical drilling spindles, 32 mm grid • 6 horizontal drilling spindles, 32 mm grid (4 in X-axis, 2 in Y-axis) • Grooving saw unit arranged in X-axis • Motor controlled via inverter up to 7,500 rpm • Tool changers: 2 • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment • 1 Becker vacuum pump

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) Gedpfjx D D Hmsx Amhsiu • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: S/N 320.01.001.22, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 35 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, CNC Machining Center / 3-Axis CNC Router Format 4 Profit H102232 S/N 320.01.001.22, year of manufacture 2022, with control system, HSK63 tool holder, Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Giodpfsxy Abuex Amhou Z-axis = approx. 280 mm, including 2 Becker VTLF2.250/0-79 vacuum pumps, year of manufacture 2021, including loading table, discharge conveyor, 8-position tool changer, working area approx. 2,800 x 2,060 mm, groove saw unit in X and Y direction, horizontal drilling in X and Y direction, two spindles each, DH 16 drilling unit, vertical drilling: 5x in Y direction and 7x in X direction, main spindle approx. 10 kW, X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: S/N 320.09.003.17,, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 28 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, Equipment: documentation/manual, CNC Machining Center 3-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.003.17 Year of manufacture: 2017 Tool holder: HSK63F Axis travel: Gsdpfx Amexy Abhjhjiu X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, Including 2 vacuum pumps Becker VTLF2.250/0-79, Year of manufacture: 2017 Including loading table and discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Slot saw unit for X and Y directions Horizontal drilling in X and Y, two spindles each, drilling unit DH 16, Vertical drilling: 5x in Y direction, 7x in X direction, main spindle approx. 10 kW X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, torque: 4 Nm, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 11 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Machining Center 4-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.002.17 Year of manufacture: 2017 Tool holder: HSK63F Travel distances of the axes: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, C-axis present Including 2 Becker vacuum pumps VTLF2.250/0-79, year 2017 Incl. loading table + discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Groove saw unit in x and y directions Horizontal drilling in x and y directions, two spindles each, drilling unit DH 16 Giodpoxy Aa Dsfx Amheu Vertical drilling: 5 in y-direction and 7 in x-direction, main spindle approx. 10 kW X-axis speed: approx. 100 m/min, Y-axis speed: approx. 100 m/min, Z-axis speed: approx. 30 m/min

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Gjdpfeyr Awbox Amheiu Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Gedovz U Erepfx Amhjiu Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this used FORMAT-4 PROFIT H200R 13.33 throughfeed machining centre, year of manufacture 2022. Type: PROFIT H200R 13.33 Serial number: 30B.05.067.22 Code: 9417 Rated voltage: 400.0 V Number of phases: 3P+N Frequency: 50/60 Hz Rated current: 40.0 A Power: 18.0 kW Year of manufacture: 2022 Control voltage: 24 VDC Minimum protection fuse: 32 A Maximum protection fuse: 50 A Minimum compressed air supply: 8 bar Gedeyvtq Uspfx Amhoiu Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us.