Used Fit for sale (4,645)

Condition: used, empty load weight: 5,600 kg, maximum load weight: 12,400 kg, first registration: 02/2012, next inspection (TÜV): 01/2025, total width: 25,500 mm, suspension: air, tire size: 235 / 75 R 17.5 / 10mm, front tire size: 235 / 75 R 17.5 / 10mm, operation weight: 18,000 kg,

Condition: excellent (used), functionality: fully functional, mileage: 75,239 km, power: 125 kW (169.95 HP), gearing type: mechanical, overall weight: 5,500 kg, empty load weight: 3,020 kg, maximum load weight: 2,480 kg, first registration: 02/2019, next inspection (TÜV): 01/2026, loading space length: 5,100 mm, loading space width: 2,100 mm, emission class: euro6, driver cabin: day cab, number of seats: 3, Year of construction: 2019, Equipment: air conditioning, airbag, cable winch, cruise control, navigation system, parking heater, seat heater, trailer coupling, Ford Transit/Algema/Fitzel Speeder 2/Blitzlader/5.5 t/Winch/Remote control Itjdpfxoxx T Rwj Aaner • Manufacturer: Ford • Model: Transit • Mileage: 75,239 km • First registration: 02/2019 • Power: 125 kW / 170 hp • Transmission: 6-speed manual gearbox • Winch: Comeup Rhino 8, manually adjustable • Radio remote control • Platform: Algema hydrobalance • Platform length: 5.10 m • Platform width: 2.10 m • Platform height: 0.82 m • Unladen weight: 3,020 kg • Payload: 2,480 kg • Gross vehicle weight: 5,500 kg • Electrically extendable ramps • Wheelbase: 3.45 m • Detachable tow hitch • Reversing camera • 3 seats • Heated seats • Lane keeping assistant • Tachograph • Navigation • Airbag • Air conditioning • Heating • Auxiliary heater • Cruise control • Euro 6 • TÜV valid until Jan 2026 • German vehicle • German paperwork • Immediately operational This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typographical mistakes excepted. - Sale according to our General Terms and Conditions.

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Isdpfx Aaexg Ehdsnjtr Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: S/N 320.01.001.22, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 35 kVA, controller manufacturer: WoodFlash 4.1, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, table width: 2,100 mm, table height: 895 mm, table length: 3,200 mm, overall weight: 4,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, CNC Machining Center / 3-Axis CNC Router Format 4 Profit H102232 S/N 320.01.001.22, year of manufacture 2022, with control system, HSK63 tool holder, Itsdpexy Abusfx Aanjr Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, including 2 Becker VTLF2.250/0-79 vacuum pumps, year of manufacture 2021, including loading table, discharge conveyor, 8-position tool changer, working area approx. 2,800 x 2,060 mm, groove saw unit in X and Y direction, horizontal drilling in X and Y direction, two spindles each, DH 16 drilling unit, vertical drilling: 5x in Y direction and 7x in X direction, main spindle approx. 10 kW, X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min.

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 Iedpfxevkphgo Aanetr TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Itodpfxeu Nvwve Aansr >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Ijdpju N Slvsfx Aanetr Max. panel length: 3200 mm

Condition: excellent (used), Year of construction: 2006, CNC machining center – for furniture and doors FORMAT Model: Profit 3 Year of manufacture: 2006 4 axes Extras: 1) Lock case aggregate Iodpfow T U Axsx Aanjtr 2) 90° saw aggregate VERY GOOD CONDITION!!!

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Itedpfjrqg U Dex Aanjr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: S/N 320.09.003.17,, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 28 kVA, controller manufacturer: WoodFlash 4.1, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, table width: 2,100 mm, table height: 895 mm, table length: 3,200 mm, overall weight: 4,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, Equipment: documentation/manual, CNC Machining Center 3-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.003.17 Year of manufacture: 2017 Tool holder: HSK63F Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, Including 2 vacuum pumps Becker VTLF2.250/0-79, Year of manufacture: 2017 Including loading table and discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Slot saw unit for X and Y directions Horizontal drilling in X and Y, two spindles each, drilling unit DH 16, Isdpsxy Abhsfx Aanjtr Vertical drilling: 5x in Y direction, 7x in X direction, main spindle approx. 10 kW X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min

Condition: used, mileage: 1,28,118 km, power: 110 kW (149.56 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,200 kg, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro3, Year of construction: 2008, Truck F. ATL Swap body lift truck Kamag Wiesel WBH 25 Engine damage! Engine has been running / little power Diagnosis Metal splinter in fuel filter and pre-filter Itjdpsqxuadjfx Aaner Engine removed on pallet! Year of construction 2008 Unladen weight 8200Kg permissible total weight 18000Kg LxWxH 9300mm x 2550mm x 2900mm Euro 3 1st hand Kilometers according to previous owner 128118 You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery Ijdpexfwfljfx Aanjtr if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1916180-002656, -Type: PSG ProfiTEMP+ 66 zones -Year of construction: 2019 -Serial number: 1916180-002656 Itedpexuk Edjfx Aansr -Power Supply: 230 VAC (3~ / N / PE) 50/60Hz -Power: 43 kW max., 3x63 A -Connections: XS3 RJ45, XS1 RS485 -Condition: Only used for test moulds -Brand: PSG Plastic Service GmbH -Extras: 8x cable with 24-pin plug & manuals

Condition: refurbished (used), Year of construction: 2025, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Itjdpfx Aogmf Rnoaner Grinding wheel width: 500 Grinding wheel diameter: 610 CNC: 5 axis (new)

Condition: new, machine/vehicle number: 824d4741dc933a94e9a7a7a8c, empty load weight: 5,600 kg, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Surface stone-repellent Splash guard behind last axle in asphalt version, attached to mudguard with hinge, with attachment option on top of mudguard, shortened mudguard Tow hook at the rear Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Membrane rear wall Rear wall as pendulum flap, resting on the outside with 2-fold hook locking. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Insulated body, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Itjdpfx Asi Rix Sjanor Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marker

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash 4.1, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, table width: 2,100 mm, table height: 895 mm, table length: 3,200 mm, overall weight: 4,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Machining Center 4-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.002.17 Year of manufacture: 2017 Itsdpfx Aaoxy Aa Djner Tool holder: HSK63F Travel distances of the axes: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, C-axis present Including 2 Becker vacuum pumps VTLF2.250/0-79, year 2017 Incl. loading table + discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Groove saw unit in x and y directions Horizontal drilling in x and y directions, two spindles each, drilling unit DH 16 Vertical drilling: 5 in y-direction and 7 in x-direction, main spindle approx. 10 kW X-axis speed: approx. 100 m/min, Y-axis speed: approx. 100 m/min, Z-axis speed: approx. 30 m/min

Condition: excellent (used), Year of construction: 2021, saw blade diameter: 400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 76 rpm, Equipment: rotational speed infinitely variable, Kaltenbach KKS 401 NA 2000 Retrofit Model: KKS 401 NA Year of overhaul: 2021 Complete retrofit and overhaul in 2021, including all-new electrics, controls, and drives. Saw motor: 5.5 kW, frequency controlled Saw blade speed: 20–76 rpm Blade cutting speed (400mm): 25–96 m/min Working range, round material: 135 mm Working range, square material max.: 130 x 130 mm Working range, rectangular material max.: 230 x 80 mm Isdpfx Ajxmv Rcjanstr Kaltenbach KKS 401 mit NC-controlled mitre adjustment Kaltenbach RKS 451 / KKS 401 feed extension, 2000 mm Extended feed length for efficient processing of particularly long sections. Flat magazine for 6m steel materials, 6 x 2m - For preloading of round, square, and profile material - System designed for materials up to 200 mm width (slot width adjustable) - Material supplied via chain conveyor with loadable compartments - Material separation by compartment - Fully automatic loading process controlled via Siemens PLC on the saw - Material adjustment at the magazine is manual - Magazine payload max. 2.0 tons - Material loading possible from front side - Protective enclosure with light barrier - Total length approx. 7.5 m - Total width approx. 2.5 m Kaltenbach RKS 451 / KKS 401 chip conveyor Minimum quantity lubrication by Menzel with recirculating cooling system including integrated pump - Switchable in machine settings between minimum quantity and recirculating lubrication Remote maintenance module, interface for remote machine access and update capability via remote maintenance by Lupberger Systemlösungen OHG Preparation for offload system installation - Hardware preparation for future installation of an offload system Saw cycle control - User operates the control in cycle mode - Data entry in surface structure required for the entire bar - Fetch material (with cut-off flap or magazine option) - Relative positioning - Absolute positioning - Absolute cutting with mitre selection (with NC-controlled mitre and pusher feed option) - Relative cutting with mitre selection (with NC-controlled mitre option) - Wiper function (with wiper arm and material disposal unit option) - Material eject front - Material eject via flap (with pusher feed and flap) - Repetitions - Program end Fully operational, in very good overall condition. Price: Negotiable plus VAT. (no warranty)

Condition: excellent (used), Technical data Manufacturer: Zeiss Type: Carfit 42160025 Weight: approx. 5300 kg Measuring plate X = approx. 4000 mm Y = approx. 2000 mm Ijdpfsgnyg Eex Aanetr Optionally with measuring stand Stiefelmayer or SMM-C CNC! Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively at specialist customers. (Changes and errors in the technical data, information and prices as well as and prices as well as subject to prior sale).

Condition: like new (used), Year of construction: 2022, The Felder profit H80 is a professional CNC machining center suitable for high-volume furniture production and other woodworking applications. The machine enables precise machining with high speed and efficiency. Thanks to its gantry design and advanced vacuum system, stable and safe machining of even the largest parts is ensured. Technical information Isdpfx Aaov I Sxpjnstr Machining area: X = 3090 mm, Y = 2100 mm, Z = 85 mm Power transmission: Rack in X and Y axes, ball screw in Z axis Feed speed: X = 25 m/min, Y = 25 m/min, Z = 15 m/min Vacuum table: 10 vacuum fields with Smart Zoning function Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Power supply: 3 x 400V / 50 Hz Software: Compact Control - supports ISO Code and WoodFlash Extraction: Central suction nozzle with slide valve distribution Safety features: Light barrier system, optical operation indication Machine composition Robust gantry construction with double drive in X axis Fully automated central lubrication of all os Control panel with 24" LED display and USB interface Green Line energy package for energy saving Drilling head DH 16 4H 2S – 12 vertical and 4 horizontal spindles Loading unit with lifting table for efficient handling Conveyor belt on the machine output side for smooth workpiece removal

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Itjdpfsrrh T Asx Aansr Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,300 kg, maximum load weight: 29,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Itjdji Rix Iepfx Aanor Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Surface stone-repellent Splash guard behind last axle in asphalt version, attached to mudguard with hinge, with attachment option on top of mudguard, shortened mudguard Tow hook at the rear Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Membrane rear wall Rear wall as pendulum flap, resting on the outside with 2-fold hook locking. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Insulated body, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marking

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class Itjdpfx Aaswdvthensr - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Device for manipulation of scissor fittings 1 for closing and hooking open scissors Hand-held reading device 1 Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent transport and storage in vertical position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet Itedpfow Tcu Nex Aanor switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Entrance door for protective fence 1 with limit switch

Condition: refurbished (used), Single pass - progressive honing machine SUNNEN MHS 840 (like VSS 84) overhaul and electronic retrofit (see video and photos) Iodevw Ddvspfx Aanotr 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning Iedpfewd Nlksx Aanotr - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h