Used Flail-Mowers for sale (183)

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 7,984 h, Equipment: adjustable boom, cabin, hydraulics, The specifications of the Ahlmann AZ 45 include an operating weight of 4.5 tons, and the machine is equipped with four-wheel steering and a swing loader. Further specifications include a turning radius of 3150 mm and a maximum speed of 30 km/h. The machine can be used as a swing loader. Special configuration with additional engine for operating Herder pruning arm with Herder flail mower. Dsdpfxex R Uqrs Afpoun Fully operational condition. Ahlmann 2024 completely overhauled.

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 Dujdpfx Afju Rurujpjn DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Year of construction: 2013, operating hours: 702 h, condition: used, Power: 17 kW (23 HP) Make of engine: Briggs & Stratton, Vanguard General condition: good Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Rapid Model: 430 Year of build: 2013 Condition: Used Data: Total dimensions LxWxH: 2046 x 1190 x 1200 mm Drive type: Benzin, 17 kW / 23 PS Engine: Briggs & Stratton, Vanguard Hours: 702,5 Weight: 410 kg Special features: Briggs & Stratton 2-cylinder four-stroke gasoline engine with 23 HP, Transmission: continuously variable hydrostatic drive with single-disc dry clutch, Steering column: tool-free height adjustable, Steering: steering brake system, Tires: 23x8.50 - 12AS, Fuel: gasoline, Weight: approx. 215 kg, Auxiliary control unit for hydraulics, Year of manufacture: 2014 / Lipco mulching device (flail mower), Type: ME 104-LZ, Weight: 170 kg, Year of manufacture: 2014, Working width: 1 m. Duedpsxgti Ajfx Afpen Price on demand Location: 41468 Neuss: immediately available

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 33,596 Km * Only 5333 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F28B.22 * 1,85m = 995 Kg - 3,10m = 765 Kg - 4,30m = 545 Kg- 5,50m = 395 Kg * Hook height 8 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,700 kg * Payload: 2,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Dsdpovhqhijfx Afpoun You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 78,198 km, power: 107 kW (145.48 HP), first registration: 09/2012, fuel type: diesel, empty load weight: 3,405 kg, maximum load weight: 2,595 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,700 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 1,700 mm, loading space width: 1,650 mm, loading space height: 800 mm, Equipment: additional headlights, air conditioning, all wheel drive, cabin, crane, differential lock, trailer coupling, * German vehicle * 1st hand * See photos for condition * Complete documentation incl. test books and checkbooks available * Only 2,933 operating hours * Three-way tipper with crane behind the driver's cab * Palfinger crane * Type PK 3400 A * Hook height 9m * 5th + 6th control circuit * Grapple control * 2 hydraulic extensions * 2 hydraulic outriggers * 6.40 m = 430 kg. * 4.90 m = 600 kg. * 3.40 m = 870 kg. * Load capacity 990 kg. * Municipal plate with all hydraulic connections * Working plate suitable for various attachments * Various attachments available at extra cost * for example snow blade/ flail mower/ Mulag or Fiedler front boom etc. * Three-way tipper Dodpfsvhp Tkox Afpjun * Tipper length 1.70 m x 1.65 m * Tail lift elevation 0.80 m * DIN lashing eyes * High front wall * Trailer coupling * 3,500 kg towing capacity * Various storage compartments * Cab with air conditioning * Auxiliary heating * 2 air-sprung comfort seats * Heated seats * 5-speed gearbox * Diff locks * Rotating beacons * Wheelbase 2.70 m * GVW. 6,000 kg. * Unladen weight 2,405 kg. * Payload 2,595 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 06/2008, fuel type: diesel, empty load weight: 499 kg, maximum load weight: 1 kg, overall weight: 500 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Duodpfxjw U Afws Afpon All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, German vehicle, first owner, LADOG T1400, condition as shown in photos, original mileage of only 33,596 km, only 5,333 operating hours. Three-way tipper with Fassi crane mounted behind the cab, Fassi crane model F28B.22, hook height 8 m. Lifting capacities: 1.85 m = 995 kg, 3.10 m = 765 kg, 4.30 m = 545 kg, 5.50 m = 395 kg. Equipped with 5th and 6th hydraulic control circuits, 2 hydraulic outriggers, height-adjustable municipal work platform with hydraulic connections, four-wheel steering, EasyDrive (hydrostatic drive), 2 trailer hitches, trailer load 3,500 kg. Tipper dimensions: length = 2,100 mm, width = 1,400 mm, height = 300 mm. Aluminum side panels, Dücker UNA 200 flail mower available at extra cost, high bulkhead, power steering, differential lock, 2 comfort seats, roof hatch, rear window, sliding window, municipal lighting and headlights, beacons. Wheelbase: 2,500 mm, gross vehicle weight: 5,000 kg, unladen weight: 2,700 kg, payload: 2,300 kg. Dedovhqhpspfx Afpeun If a new TÜV inspection is desired, we would be happy to provide you with an offer via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new safety inspection (SP), without new accident prevention inspection (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend a viewing and inspection of the equipment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and viewings are possible and expressly desired at any time by appointment. All information provided without liability. No responsibility is taken for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and features of the vehicle/equipment. Subject to change, prior sale, and errors.

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 2 kg, maximum load weight: 2,400 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m Dusdpfjvhqu Aex Afpen * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 2,400 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost Dedpfxsvhqu Ne Afpjun * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 06/2008, fuel type: diesel, empty load weight: 499 kg, maximum load weight: 1 kg, overall weight: 500 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Dsdpfxow U Afqe Afpoun Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Year of construction: 2024, 158 USED BCS 740 single-axle tractor. Manufactured in 2024 - machine under warranty. Warranty: 2 years. EQUIPMENT: - flail mower Djdpexgqrbofx Afpsun - operator's trolley - engine housing - hour meter - quick coupler - aluminum ramps

Condition: used, Year of construction: 1988, operating hours: 10,600 h, power: 66 kW (89.73 HP), next inspection (TÜV): 06/2027, Equipment: all wheel drive, cabin, front linkage, Mercedes Benz MB-Trac 900 turbo Classic with front loader and 3-meter flail mower Tractor * Tractor Duodpfxsxtdige Afpsn * Towing vehicle * Vintage vehicle * Collector's item * Digital tachometer * Year of manufacture: 1988 * First registration: 13.10.1988 * Next inspection (MOT): 03/2027 * Model series: WDB 440.173 * Gross weight: 6,500 kg * Unladen weight: 3,980 kg * Overall dimensions: 4,150 mm x 2,140 mm x 2,810 mm * Maximum speed: 40 km/h * Engine: OM 364 A * Diesel * 66 kW / 2,400 rpm * Displacement: 3,944 cm³ * Cab * Radio * New tires 16.9-24 * Errors, input mistakes, and prior sale reserved Location and viewing of our vehicles: * STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Service for all makes in the field of horse transporters and trailers, motorhomes * Please arrange an appointment in advance Contact: Richard Theurer / Andreas Theurer

Condition: new, Year of construction: 2024, Perfect Flail Mower KJ-150 For front mounting on farm or wheel loaders Including swivel wheels for depth control 1.50 m working width Dodpfjv Aqr Dox Afpjun Hydraulic drive (return line + leakage line required) With EURO adapter | Internal No.: 11212948

Condition: used, Year of construction: 2022, operating hours: 4,240 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Dujdoyhckmepfx Afpjn Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Dedpfoxx Rvksx Afpoun Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off Dujdpfx Afsxx Sdpjpon 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Duodpfexx Rrrsx Afpjn Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Dodpfsxx Tigex Afpoun Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,920 kg, lifting height: 3,358 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 2,000 mm, Year of construction: 2025, load capacity: 2,500 kg, Equipment: UVV, additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 5025 – Our heavyweight lifts loads up to 2.5 tons. The H&R Wheel Loader 5025 is your reliable all-rounder for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025 Farm Loader Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Dsdpfsu Dyl Tex Afpsun Compact design, high maneuverability: Despite its size and weight, the H&R Wheel Loader 5025 is relatively maneuverable. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between different attachments. Expandable functions: Use the additional 3rd and 4th hydraulic control circuits to operate front-end tools such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heater, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025 Wheel Loader • Fully equipped • Extensively optimized in Germany • Lifts heavy loads up to 2.5 tons at 3.35 meters • Includes standard bucket (200 cm) and pallet fork • Powerful and versatile – versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Joystick with electric gearshift for precise control • 3rd and 4th hydraulic control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • Diesel auxiliary heater • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes 1 year warranty Spare parts warranty Price Net: €28,583.00 VAT: €5,430.77 Gross: €34,013.77 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 3358 mm (bottom edge of standard pallet fork) Unloading height: 2692 mm (standard bucket tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5370 x 2080 x 2650 mm Weight: 4920 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments Dsdpfx Afoulac Tspjun • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: The Yunnei DEF20CFF4 engine with 61 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size, weight, and high lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, a rearview camera, heating, ventilation, and a radio with MP3 and USB. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518 Farm Loader • Fully equipped • Extensively optimized in Germany • Powerful and versatile – versatile use • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • Rearview camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for trailer use • 220V coolant preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to the EU Machinery Directive Dusdpfx Afjul Ab Sopjn • Includes a 1-year spare parts warranty Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Unloading height: 2279 mm (standard bucket tipped out) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Dujdpergq Etsfx Afpon Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions Dedpfx Aforhgn Sepeun • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescopic, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Djdpsrdhx Tjfx Afpeun Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,550 kg, empty load weight: 2,000 kg, lifting height: 2,530 mm, number of seats: 1, Year of construction: 2025, fuel: diesel, load capacity: 950 kg, Equipment: all wheel drive, head guard, hydraulics, pallet forks, standard shovel, H&R Loader 2010-S25: The compact wheel loader for versatile applications with an open cab and narrow track. With a powerful 25 HP 3-cylinder Perkins Turbo engine from Germany and robust all-wheel drive, this compact wheel loader offers outstanding lifting capacity and high maneuverability – perfect for heavy loads and tight work environments. Advantages of the H&R Wheel Loader 2010-S25 Powerful engine from Germany: The 3-cylinder Perkins Turbo engine with 25 HP delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 950 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-S25 • Lifts up to 950 kg at 2.53 m (bottom edge of standard pallet fork) • Extensively optimized in Germany • Narrow track for tight work environments • Supplied with standard bucket and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gear shift for precise control • 3rd and 4th control circuits for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Trailer hitch for additional trailer use • 220 V cooling water preheater for reliable cold start capability and increased engine life Dodpfx Afordzymopeun • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,150.00 VAT: €3,638.50 Gross: €22,788.50 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 3-cylinder Perkins Turbo Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lift height: 2530 mm (bottom edge of standard pallet fork) Lift capacity: 950 kg Wheelbase: 1595 mm Tires: 31×15.5-15 Dimensions: 3380 x 1407 x 2340 mm Weight: 1980 kg Spare parts and accessories are available from us.