Used Lawn Drag for sale (220)

Condition: ready for operation (used), functionality: fully functional, overall weight: 55,000 kg, shovel volume: 4 m³, Year of construction: 1978, operating hours: 17,500 h, Weserhütte W180 dragline excavator, with Kraz engine, 18 m boom length, 4 m3 bucket, working condition Nlodpfewpx Ifex Ahnsf

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Otec DF3-4 Type of machine: Drag finishing system Manufacturer: Otec Model: DF3-4 Year of manufacture: 2008 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement Technical data: - Machine dimensions: 1180 x 970 x 2010 mm - Working container useful volume: 80 liters Nljdpfszty Apsx Ahnef - Maximum immersion depth: 250 mm - Weight: 420 kg - Connection voltage: 400 V - Connection power: 7.5 kVA - Maximum workpiece diameter: 250/210 mm - Maximum workpiece weight: 15 kg Accessories: - Various fixtures (see pictures) - 2 trolleys for transporting the tub - One spare tub for the finishing medium - Documentation

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Njdpfxewm Nd Eo Ahnjlf

Year of construction: 2015, condition: ready for operation (used), One Tinkap drag finishing machine is available. Tools: 12/cycle, Throughput: approx. 144tools/h, Clamping range: 42mm, Max. tool length: 250mm, Processing heads: 2, Tool holders: 2x6. Documentation available. An on-site inspection is possible. Nodpfxszhb E Uo Ahnjlf

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 Nedpszi R R Nsfx Ahnjlf For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website. Nljdpfezu Rzfjx Ahnef

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Nedozuzimepfx Ahnjlf Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: used, 1 unit of KIOTI CS 2520 diesel lawn tractor Engine: liquid-cooled, 3-cylinder KIOTI diesel engine, drive & traction: switchable all-wheel drive (4WD) including mechanical rear differential lock, fuel tank capacity: 25.5 liters of diesel, serial number: 047300068 Nledpszqanyjfx Ahnof Color: as shown in the pictures, see images and inspection Condition: new

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: Njdpfx Ahjzhr Rhenolf - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: used, Riding Lawn Mower ETESIA Type Hydro 124 D Year of manufacture: 2003 Power: 15.5 kW Cutting width: 1240 mm Grass catcher: 600 liters = over 100 kg of grass Turning radius: 1250 mm Nedpjy Ai Ntefx Ahnelf Travel and working speed: max. 16 km/h 3-cylinder Lombardini FOCS 903 diesel engine Displacement: 916 cm³ Power: 22 HP at 3600 rpm - Water-cooled - Two counter-rotating blades, 65 cm long with a 6 cm overlap - The powerful suction lifts the grass upright before cutting - Central rear discharge - Hydraulic high-tip emptying, controlled from the driver's seat via toggle switch - Electric cutting height adjustment from 44 to 140 mm - Hydrostatic drive with rear-wheel drive via hydraulic motors - Hydraulic differential lock - Hydraulic power steering - Twin hydraulic connections for operation of front-mounted attachments - Adjustable steering column - Hour meter: 1,539 operating hours Overall width: 1,280 mm Length: 2,800 mm Weight: 716 kg Good condition

Condition: used, For inquiries regarding the attachment, Mr. Herden will assist you (by phone: ...). Holp VarioBucket / VL.112.700 / MS10 / HARDOX / Wear Plates / NEW / In Stock & Immediately Available Price: €6,335.00 net / €7,538.65 gross - Suitable for excavators: 14 t – 25 t - Own weight approx.: 570 kg - SAE capacity: 700 liters - Slope angle: 54° - Trench bottom radius: 150 mm - Incl. wear plates - The bucket is manufactured entirely from HARDOX. Advantages of the Holp VarioBucket: - Large work surfaces - Robust construction using high-quality materials - Minimal weight thanks to optimized triangular design - Rounded base - Two working openings - Rectangular working opening - V-shaped - The VarioBucket impresses with high performance and clean working results. It ensures precise discharge thanks to the V-shaped opening and provides extremely high trench cleaning capacity in drag operation. Wherever increased speed and flexibility are required for handling various tasks, the VarioBucket is a real asset on the construction site: faster, more adaptable, and safer. We have many more Holp products available for immediate delivery from stock! Please contact us at / ... for further information. On request, we will also be happy to prepare a financing offer for you. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Nledpezwluljfx Ahnof We supply the complete Holp range! Errors and prior sale excepted! = Additional information = Condition: New Application: Construction Unladen weight: 570 kg Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2021, Stihl 53 cm Gasoline Lawn Mower RM 655.1 VS The STIHL RM 655 VS gasoline lawn mower is not only a true powerhouse due to its durable aluminum housing. With its Vario drive and a cutting width of 53 cm, it is ideally suited for maintaining large areas. The central, seven-stage cutting height adjustment allows you to choose a grass height from 25 to 85 mm. To make your work easier from the start, its engine is equipped with the ReadyStart function, which ensures reliable starting. During mowing, the speed of the powerful engine remains constant, even when changing speed, and its mono-comfort handle ensures easy handling. The blade-brake clutch of the RM 655 VS is also noteworthy, as it disengages the cutting unit when the engine is running, so short mowing breaks do not require restarting the mower. The foldable grass catcher with a volume of 70 liters and a fill level indicator can be easily emptied. With this gasoline lawn mower, you are choosing a reliable companion for your gardening work. Technical data: • Aluminum housing with wear strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher volume: 70 l • Displacement: 173 cm³ • Foldable grass catcher with fill level indicator • Comfort handle • Easy-rolling wheels • Blade-brake clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: HD775 OHV SC series • Mulching function & multi-blade • Rated speed of working tool: 2800 rpm • Rated power: 2.6 kW / 3.5 hp • Lawn area: up to 2500 m² • Cutting width: 53 cm Nljdpfx Aotvf R Eehnef • Cutting height: 20-85 mm • Super-Soft handle • Uncertainty KpA [dB(A)]: 2 dB(A) • Vario wheel drive • Vibration guide handle ahw: 3.8 m/s² • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment The lawn mower is new and unused. It was only on display in our showroom and has minor storage marks. The lawn mower cannot be shipped by a parcel service as it is too large and too heavy. Shipping by freight forwarder is possible at your expense. No shipping outside EU. You will receive an invoice with VAT shown. Payment exclusively by bank transfer - NO PAYPAL!

Condition: used, Year of construction: 2004, operating hours: 19,000 h, machine/vehicle number: D35601, The Senzani CM5 is a continuously operating, vertical cartoning machine from Senzani Brevetti, specifically designed for the precise packaging of individual items such as capsules, pouches, or smaller packaged products into pre-glued folding cartons. Machine features: Nedpfx Ahozp Iw Hjnolf Operating principle: Continuous motion for high process stability. Application: Vertical filling of pre-glued cartons, often combined with counting and dosing systems (coffee or tea capsules, lawn seeds, muesli, or pet food). Integration: Seamless integration into fully automatic primary and secondary packaging lines is possible. The machine operated for almost 19 years at Flechtorfer Mühle, where it was only used to fill one product. After being taken over by a birdseed company, it successfully completed a test run. Following the sale and a longer period without power, a software update from Senzani is necessary, costing approximately €12,000. A metal detector is included in the offer. A pendulum cup feeder can be purchased separately to ensure consistent feeding.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: TSH 071, overall weight: 44 kg, input voltage: 220 V, input frequency: 50 Hz, Used Pfeiffer TSH 071 “Turbo Cube Drag Pumping Station”, portable turbo vacuum pump Manufacturer: Pfeiffer Nljdpexqprzofx Ahnef Model: TSH 071 Voltage: 190-260V (50/60Hz)

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Nljdpfx Ahezwhbbonjf Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: used, mileage: 1,53,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Njdpoyx N Hqefx Ahnolf Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Main parameters: - table width: 3200 mm, - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, - vacuum fan for holding down the material on the worktable. Njdpfx Aoxcvt Ashnjlf The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.

Condition: used, For inquiries regarding attachments, Mr. Herden will be happy to assist you (by phone at ...). Nledpoyhykzjfx Ahnef Holp VarioBucket / VL.112.400 / MS08 / HARDOX / NEW / in stock & immediately available Price: €4,130.00 net / €4,914.10 gross - Excavator weight class: 7 to – 14 tonnes - Own weight approx.: 320 kg - Capacity SAE: 400 litres - Slope angle: 54° - Trench bottom radius: 150 mm - The bucket is made entirely of HARDOX Advantages of the Holp VarioBucket: - Large working surfaces - Robust design with high-quality materials - Minimal weight due to optimised triangular construction - Rounded bottom - Two working openings - Rectangular work opening - V-shaped opening - The VarioBucket delivers high performance while ensuring clean operation. Its V-shaped opening allows for precise dumping and offers outstanding trench clearing performance in drag operation. Wherever increased speed and flexibility are required for a wide range of tasks, the VarioBucket is a real asset on the construction site: faster, more adaptable, and safer. We have many other Holp products in stock and available for immediate delivery! Simply contact us at / . Financing options available upon request. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Errors and prior sale excepted. = Further information = New: Yes Intended use: Construction Empty weight: 320 kg Please contact Marius Herden for more information.

Condition: new, Year of construction: 2002, MKF Motorized Adjustable Spreader Beam Adjustable spreader beams are used when attachment points and load centers of gravity vary. Features & Highlights: Central suspension point: Solid triangular lifting eye for the crane hook. Electric center-of-gravity adjustment: Electric motor drive (connection via 230V CEE plug) to balance uneven loads directly at the push of a button. Ergonomic control panel: Height-adjustable control unit mounted on a vertical rail guide with a drag chain (energy chain) to protect the cables. Clear controls: Controls for locking pins (Open / Closed / Invalid Position) and center-of-gravity adjustment (incl. LED indicator for the center position), plus a central emergency stop switch. Includes transport frame: Robust, mobile base frame made of square steel tubing for safe and compliant storage. Technical Data Manufacturer: MKF Helmut Möschl GmbH Load capacity: 9,000 kg Dead weight: 550 kg Year of manufacture: 11/2002 Serial number: R 6906 Type: 743 4954 13 Beam dimensions: 1920 x 400 mm Frame dimensions: 2670 x 1250 x 1880 mm Nodpszwmckefx Ahnolf Original price: €10,700 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: used, For all inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Holp VarioBucket / VL.112.700 / Liebherr SW48 / HARDOX / Wear Plates / NEW / In stock & immediately available Price: €6,010.00 net / €7,151.90 gross - Suitable excavator weight: 14 to 25 tons - Own weight approx.: 570 kg - SAE capacity: 700 liters - Slope angle: 54° - Ditch bottom radius: 150 mm Njdpfoyhylrsx Ahnslf - Includes wear plates - The bucket is made entirely of HARDOX steel. Advantages of the Holp VarioBucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Rounded base - Two work openings - Rectangular work opening - V-shaped design - The VarioBucket impresses with its high performance while ensuring clean operation. Its V-shaped opening allows for precise discharge and provides very high trench cleaning performance in drag operation. Wherever speed and flexibility are required for a variety of tasks, the VarioBucket is a true asset on the job site: faster, more adaptable, and safer. We have a wide range of other Holp products in stock and ready for immediate delivery! Mr. Herden will be happy to assist you (by phone). We are pleased to provide you with a financing offer upon request. We are official distribution and service partner for Holp. We are official distribution and service partner for Gierking GMT. We are official distribution and service partner for OilQuick. We are official distribution and service partner for Weber MT. We are official distribution and service partner for Westtech. We are official distribution and service partner for DMS. We are official distribution and service partner for Seppi M. We are official distribution and service partner for Magni telescopic handlers. We are official distribution and service partner for JCB construction equipment. We are official distribution and service partner for Mercedes-Benz. We are official distribution and service partner for Iveco. Furthermore, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Holp product range! Errors and prior sale excepted! = More information = New: Yes Intended use: Construction Unladen weight: 570 kg Contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone) directly. Holp VarioBucket / VL.112.700 / CW20 CW30 CW40 / HARDOX / Wear Plates / NEW / in stock & immediately available Price: €6,045.00 net / €7,193.55 gross - Excavator weight class: 14 t – 25 t - Own weight approx.: 570 kg - SAE capacity: 700 liters - Ditching angle: 54° - Base radius: 150 mm - Includes wear plates - The bucket is manufactured entirely from HARDOX. Advantages of the Holp VarioBucket: - Large surface area - Robust design with premium materials - Minimal weight due to optimized triangular construction - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The VarioBucket stands out for its high performance and precise operation. The V-shaped opening enables targeted pouring, while offering very high trench cleaning performance when dragged. Wherever greater speed and flexibility are required for handling a variety of tasks, the VarioBucket delivers real benefits on the job site: it is faster, more adaptable, and safer. We have a wide range of other Holp products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we can also provide you with a financing offer. Nlodpfx Asyhylljhnef We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = More information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (via phone). Holp VarioBucket / VL.112.700 / OQ65 / HARDOX / Wear Plates / NEW / in stock & immediately available Price: €6,430.00 net / €7,651.70 gross - Excavator class: 14 to 25 tons - Own weight approx.: 570 kg - SAE capacity: 700 liters - Ditch slope angle: 54° - Ditch bottom radius: 150 mm - Including wear plates - The bucket is manufactured entirely from HARDOX steel. Advantages of the Holp VarioBucket: - Large working surfaces - Robust construction with high-quality materials - Minimal weight due to optimized triangular design - Rounded sole - Two work openings - Rectangular work opening - V-shaped - The VarioBucket impresses with its high performance and clean operation. The V-shaped opening allows for precise pouring and delivers very high trench clearing performance in drag operation. Where greater speed and flexibility are required for a variety of tasks, the VarioBucket is a true asset on the construction site: faster, more adaptable, and safer. Numerous other Holp products are also in stock and available immediately! Please contact us at / . Financing options available upon request. Nedpfxoyhyl Ee Ahnjlf We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Errors and prior sale excepted. = More information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Tobias Ebert for further information.

Condition: used, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Holp Vario Bucket / VL.112.700 / OQ70/55 / HARDOX / wear plates / NEW / in stock & available immediately Price: €6,520.00 net / €7,758.80 gross - Suitable excavator size: 14 to 25 tons - Own weight approx.: 570 kg - SAE capacity: 700 litres - Slope angle: 54° - Trench bottom radius: 150 mm - Incl. wear plates - The bucket is made entirely from HARDOX. Advantages of the Holp Vario Bucket: - Large working surfaces - Robust design using high-quality materials - Minimal weight due to optimised triangular construction - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The Vario Bucket impresses with high performance and clean operation. The V-shaped opening enables precise dumping and delivers extremely high ditch cleaning efficiency in drag operation. Wherever higher speed and flexibility are required to tackle different tasks, the Vario Bucket is a real advantage on the construction site: it is faster, more adaptable, and safer. We have many more Holp products in stock and available for immediate delivery! Mr. Herden (tel.) is at your service. Nsdpoyhyl Sofx Ahnjlf Financing options available on request. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Further, with 800 used vehicles in stock, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Holp range! Subject to errors and prior sale. = Further information = New: Yes Application: Construction Unladen weight: 570 kg Contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Holp VarioBucket / VL.112.700 / MS21 / HARDOX / Wear Plates / NEW / In Stock & Immediately Available Price: €6,520.00 net / €7,758.80 gross - Suitable for excavators: 14 to – 25 tons - Own weight approx.: 570 kg - Capacity SAE: 700 liters - Slope angle: 54° - Ditch bottom radius: 150 mm - Including wear plates - The bucket is made entirely from HARDOX. Nljdpfx Aeyhylfshnef Advantages of the Holp VarioBucket: - Large working areas - Robust construction using premium materials - Minimal weight thanks to optimized triangular design - Rounded bottom - Two working openings - Rectangular working opening - V-shaped design - The VarioBucket impresses with high performance and clean operation. Its V-shaped opening enables precise discharge and offers very high trench cleaning capacity in drag operation. Wherever increased speed and flexibility are required for various tasks, the VarioBucket is a real asset on the job site: faster, more adaptable, and safer. We have many more Holp products in stock and immediately available! Mr. Herden (by phone) is happy to assist you. Financing options available on request. We are official Holp sales and service partner. We are official Gierking GMT sales and service partner. We are official OilQuick sales and service partner. We are official Weber MT sales and service partner. We are official Westtech sales and service partner. We are official DMS sales and service partner. We are official Seppi M. sales and service partner. We are official Magni telehandler sales and service partner. We are official JCB construction machinery sales and service partner. We are official Mercedes-Benz sales and service partner. We are official Iveco sales and service partner. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We offer the complete Holp product range! Errors and prior sale excepted. = Further Information = Condition: New Intended use: Construction Unladen weight: 570 kg Please contact Marius Herden for more information.

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Nodpfxozqu Dcs Ahnslf Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.