Used Flex for sale (3,741)

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane Iodpehwd Dnjfx Ab Iea - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. Iedpfxew Tc Ups Ab Ija ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) • Optional membrane filter for polymer recovery (not required for letterpress plates)

Condition: ready for operation (used), Year of construction: 2012, Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible. Iedpfx Aou T Rh Uob Iea

Condition: used, Roof window shutters, blinds, roller shutter curtains -electric: blinds -Width: 1140 mm -Height. 3100 mm -DIN: EN 13659 -Drive: somfy J406 HTM Isdjd R Ak Uopfx Ab Iea -External dimensions: 1380/300/H180 mm -Weight: 12 kg

Condition: used, Year of construction: 2015, Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only.  Techn. Details  Capacity: 5.500 bph (at 1,0l)  Number of cavities: 4  Max. bottle neck: 48 mm Max. bottle size: 2,0l  Previously used neck size: 38 mm  Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language Iedel Hx H Espfx Ab Ija

Year of construction: 2000, condition: good (used), Contributed tool holder VDI 60 / ATC For large CNC lathes RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG etc. WOHLENBERG etc. 2.piece . SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC 1.piece . SAUTER 0.5.921.106072.814 No.3 with ATC 1.piece . WENDEL 214.060/A3820 No.4 with ATC 2.piece . MULTIFLEX 252.71.566 No.5 and 6 Without ATC Ijdpfjh Iz Duex Ab Ioa In good condition.

Year of construction: 2017, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis • Low-backlash planetary gear boxes • Fully closed cable carriers • High quality, shielded cables • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 280 mm • Z-axis travel 480 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Weight approx. 4,000 Kg CNC Control System • FlexiCAM ACS Control System Pro • Powerful industrial CNC control system “Made in Germany” • DIN-ISO 66025 G-Code compatible • Graphical CNC simulation • Industrial PC with 17” Touchscreen display as HMI • User-friendly machine control panel with mode selectors and function keys • Spindle control with spindle override and feedrate / rapid traverse override (rotary switches) • Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Windows keyboard and mouse • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface • Remote Support via Internet • Touchscreen and machine control panel are integrated into enclosure Servo Motors and Drives • Digital servo drives with AC servo motors • High resolution absolute encoders (17 bit) • EtherCAT fieldbus Automatic Tool Change Spindle • Spindle power 10 KW (S1) / 12 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder HSK-63F • Max. 26 mm (1 1/4") tool diameter • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Isdpjflprijfx Ab Ija Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders HSK-63F / ER40 are included Precision Tool Length Sensor 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually controlled High pressure vacuum pump according to customer requirements 4x Popup Pins Automatic Central Lubrication (Grease) CE Package Delivery, commissioning & training as per requirements

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Iodpewpd Rrefx Ab Iea Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Ijdpfewa A Ttjx Ab Ija

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, rotary encoder coupling, encoder coupling Isdpfx Abecqudbs Ioa -Manufacturer: Paguflex -Type: G30 (10 pieces available) -Outer diameter: 46 mm -Inside diameter: 12 mm -Price piece: 18 EUR net -Weight: 0.07 kg

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm Isdpfx Abevd Dftj Iea weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Equipment Isdpfod Idlaox Ab Ija • drying tower upward • infeed left at the bottom • outfeed 90° at the top

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is reviewed and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes Ijdpshwd Eaefx Ab Iea - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Year of construction: 2006, condition: excellent (used), 70 rm pallet rack SSI Schaefer Palflex incl. insertion grid second hand, good condition, see pictures year of construction 2006 height 4 m depth 120 cm field load 12000 kg frame galvanized Beam red Inlay grid included! 2 pcs. grids per 2,7 meter beam length Iedpfekx E I Nsx Ab Isa Negotiable price: € 6.950,-- net ex stock Offer consists of: + 26 pcs. frames pre-assembled, depth 120 cm, height approx. 4 m +100 pcs. beams, length 2,7 m, 1500 kg payload/shelf with evenly distributed load +200 pcs. suspension guards +100 pcs. galvanized insertion grids for 50 levels of 2.7 m beam length each +104 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), functionality: fully functional, FOR MORE INFORMATION CONTACT US LODIFLEX F35 RADIAL DRILL Iodpfewhfi Hsx Ab Isa PERFECTLY WORKING ARM LENGTH 150CM

Condition: excellent (used), Compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint Ijdpfx Aoip Rcyjb Isa -Manufacturer: Wellflex, compensator unused -Type: PN 2.5 DN 250 -Nominal diameter: DN 250 Ø 273 mm / length 285 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 4x dampers available -Price: per piece -Dimensions: Ø 375 x 280 mm -Weight: 18.1 kg/piece

Year of construction: 2006, condition: excellent (used), 45 rm pallet rack SSI Schaefer Palflex incl. insertion grid second hand, good condition, see pictures year of construction 2006 height approx. 6,5 m depth 120 cm field load 12000 kg Iedpfjkx E Ryjx Ab Isa frame galvanized Beam red Inlay grid included! 2 pcs. grids per 2,7 meter beam length Negotiable price: € 6.590,-- net ex stock Offer consists of: + 17 pcs. frames pre-assembled, depth 120 cm, height approx. 6,5 m + 96 pcs. girders, length 2,7 m, 1500 kg payload/shelf with evenly distributed load +192 pcs. suspension guards + 96 pcs. galvanized insertion grids for 48 levels of 2.7 m beam length each + 68 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box -Manufacturer: Leuze lumiflex, switching part control unit ULS-5 -Voltage: 230V -Quantity: 1x switching part available -Dimensions: 250/120/H80 mm -Weight: 2.5 kg Iedep Hiy Ejpfx Ab Isa

Condition: used, 200 running meters of Schäfer Palflex pallet racking Ijdpfx Abevfnnzj Iea Used goods in good condition, see pictures. height 6,5 m depth 110 cm, galvanized bay load 24000kg Beam length 4.1 m orange Beam with additional load / compartment 3000 kg Negotiated price: € 13.790,- net ex stock Offer consists of: + 49 pre-assembled frames, depth 110 cm, height 6.5 m +288 beams, length 4.1 m, 3000 kg load per compartment +576 pcs. suspension locks +196 concrete anchors Used corner protectors available immediately, surcharge per piece 15,- € net! Load capacity plates, documents etc. are included. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Stromag-Periflex -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm Iodedfi Dajpfx Ab Iea -Hole circle inside: 138 mm -Number: 6x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg

Condition: excellent (used), 24 running meters of pallet rack SSI Schaefer Palflex incl. insertion grid second hand, good condition, see pictures height 4 m depth 105 cm beam length 2,95 m Load / compartment 2400 kg Frame galvanized, beam red Negotiable price: € 2.890,-- net ex stock Iedpfx Ajiauh Teb Ioa Offer consists of: + 9 pcs. frames pre-assembled, 12t field load, depth 105 cm, height 4 m + 32 pcs. beams, length 2,95 m, 2400 kg payload/slot + 64 pcs. suspension locks + 18 pcs. concrete anchors + 48 pcs. insertion grids / depth supports for 16 levels à 2,95m Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), roller chain, drive chain -per package: Length: 5 m Iedpfx Abob A Niqj Isa -Size reinforced: 16B-1 1-way 1" x 17.02 -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box -Manufacturer: Leuze lumiflex, switching part control unit Basis-270 -Voltage: 90-264Vac / 22W, 47-63Hz -Quantity: 4x switching part available Iedpfxsp Hiyzo Ab Isa -Price per piece -Dimensions: 260/210/H90 mm -Weight: 3.4 kg/pc.

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused -Size: DN 50 PN 16 -Machines: for noise dampening and absorption of small vibrations Iedpfx Asigrv Njb Ioa -Material: stainless steel 1.4541 -Number: 28x dampers available -Price: per piece -Dimensions: Ø 79 x 206 mm -Weight: 0.9 kg/piece

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece Ijdpfx Aboigrwbs Ija -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused -Size: DN 32 PN 16 -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel 1.4541 -Number: 13x dampers available -Price: per piece -Dimensions: Ø 53 x186 mm -Weight: 0.5 kg/piece