Used Panel Sizing Machine for sale (78,145)

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Gijdpfxsxghngs Anxst As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Gjdpfx Aoxfiw Tjnxjit Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2021, Technical Specifications – kappa 400 / x-motion: Saw blade diameter: 250–400 mm Cutting height: max. 133 mm (at 90 degree) Saw blade tilting: 0 – 45 degree Speeds: 3500 / 4500 / 5500 rpm Motor power: 5.5 kW (7.5 HP) Motor voltage: 3x 400 Motor frequency: 50 Hz Godpfxsy Nc Dko Anxoit Sliding table length: Standard 2500 mm Cutting width: 800 mm"X-Roll" system: (maintenance-free, roller bearing guidance) Control system: x-motion CNC control, 3-axis control Control panel: 5.7” (145 mm) TFT touch colour screen Features: Maintenance-free tilting segments: "Easy-Glide" Dust extraction port: Ø 120 mm (bottom) / Ø 80 mm (top) Weight: approx. 900 kgs The machine is in new condition and never has been used at all.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, compressed air connection: 6 bar, plate length: 1,200 mm, product height (max.): 3 mm, tank capacity: 3 l, warranty duration: 12 months, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Gjdpfowg E Hvex Anxsit Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation -Segmented mold Gsdewfwkwjpfx Anxeit -High-precision back gauge structure -Scalable number of axes

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Giedpfxeyvivms Anxot Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Giedpfx Anjvvkipexet

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2516 CNC sheet metal bending machines offer high flexibility, efficiency, precision, and a high level of automation. They are suitable for processing enclosures, doors, and other components. These machines are widely used in sectors such as kitchen appliances, control cabinets, power electronics, elevators, and more. Technical specifications: - Automatic tool change - Bending length: 2500 mm - Maximum sheet width: 1500 mm - Maximum diagonal length: 2800 mm - Maximum bending height: 165 mm - Maximum material thickness: stainless steel 1.2 mm / aluminum 3 mm / mild steel 2 mm - Minimum sheet thickness: 0.35 mm - Possible bending angles: 0°-180° - Inside radius: 0.8–1.2 mm Gjdpfxeyvzq Ao Anxsit - Dimensions: 5.4 m x 4 m x 2.9 m - Weight: 19,500 kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hannover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply by H+S – everything from a single source.

Condition: excellent (used), Year of construction: 2021, Sawblade tiltable 45 ° Length of the rolling table ~ 1.400 mm cutting width ~ 840 mm Motor output 7,3 kW Cutting height ~ 100 mm weight of the machine ca. ~ 500 kg Gedpfsy Erygjx Anxeit Bench space and sliding table saw Felder type K 700 for precise longitudinal, cross and format cutting of solid wood, panel materials and similar materials. The machine combines the advantages of a compact bench saw with a sliding table and is ideal for joineries, furniture construction and interior fittings. It has a tilting saw blade and is equipped with a digital rip fence.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 11,700 mm, total height: 6,400 mm, total width: 5,000 mm, warranty duration: 12 months, type of input current: three-phase, product height (max.): 2,900 mm, product height (min.): 500 mm, product length (min.): 1,200 mm, product length (max.): 2,400 mm, product width (max.): 1,200 mm, product width (min.): 1,200 mm, input voltage: 400 V, overall weight: 1,500 kg, input frequency: 50 Hz, NEW, unopened equipment, in original factory packaging, with a 12-month warranty from installation. The equipment was not installed due to a change in production profile. The video shows the equipment during the manufacturer's test operation. Stretch-hood machine Manufacturer: MSK Year of production: 2024 Type: MSK TENSIONTECH XXL Technical parameters: • Packaging data • Capacity: 40 pallets/hour • Pallets: - Size: 1.2 x 1.2 m; 2 x 1.2 m; 2.4 x 1.2 m - Weight: 100 – 1500 kg - Height: 500 – 2900 mm • Dimensions (see next page) • Connections: - Electricity: 3 x 400V/N/PE/50 Hz - Compressed air: 5 – 6 bar Other: • Infeed and outfeed conveyors – included • HMI – included • Control cabinet – included • Safety fence – included (Original purchasing price: EUR 234,500) MIP Alapanyaggyártó Zrt. Gisdpfey A I Tdjx Anxot Bojtár Street 51, Company reg. No.: 01-10-141954 1038 Budapest / Hungary VAT No.: HU32027561

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Gedpfx Anoyyya Djxoit Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Gedpfx Aeyypi Uonxeit Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Gisdpfx Ajq U N T Renxet Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Giedpfx Aneww Eqcsxst Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels Gjdpjf Ih Hcofx Anxsit also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation Gjdpfewzmvbox Anxeit - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1000 mm Motor output 5,5 kW weight of the machine ca. 1000 kg Gjdpfxovyuqrj Anxoit

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) Gsdpfx Anoywk Eloxeit EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: used, Year of construction: 2010, machine/vehicle number: MR006967, Used: Vertical panel saw, manuf. Elcon – price is ready-to-use ex Staphorst. On-site delivery negotiable. Technical specifications: - Maximum saw blade diameter: 250 mm - Serial number: 911054 Godpfoyz Ii Aex Anxjit

Condition: used, Year of construction: 1998, machine/vehicle number: MR003421, Used panel saw, manufacturer Putsch. Machine price ex Staphorst, on-site delivery negotiable. Technical specifications: - Machine number: 9814C393 Gijdpfx Asyz Iivjnxet

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Gijdpfsu Ekbnox Anxot Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Gijdpfx Aswz Ic Ajnxst Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Gedpjunrwnefx Anxjit Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Gedpfx Anjlikydexjit Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Gijdpfxeifnxxs Anxot Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°