Used Frequency Inverter for sale (6,723)

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC vector mc frequency converter -Type: SK 1100/3 FCT 27811050/06F300135469 -Power: 2.0 kVA Motor 1.10 kW -Input: 3 AC 380/460 V 47/63 Hz -Output: 3 AC 0-Input V 0-400 Hz -Control Box: MC 278900000/13F300145636 -Dimensions: 200/110/H135 mm Podpjn Tvcaefx Airjrc -Weight: 1.7 kg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 280 mm, turning diameter over top slide: 165 mm, center height: 140 mm, turning length: 700 mm, total length: 1,280 mm, total width: 700 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 70 rpm, bed width: 180 mm, type of input current: three-phase, overall weight: 320 kg, quill mount: MK 5, three-jaw chuck diameter: 160 mm, Equipment: rotational speed infinitely variable, WMP290V-F Lathe & Milling Combination with frequency inverter including 2-axis digital readout SINO including premium base cabinet LATHE Centre distance ----- 700 mm Prjdpopz I Iqofx Airsc Centre height ----- 140 mm Swing over bed ----- 280 mm Swing over cross slide ----- 165 mm Spindle bore ----- 38 mm Spindle taper ----- MT5 Lathe speed range ----- 70-1800 stepless rpm Tailstock taper ----- MT3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head outreach ----- 185 mm Milling speed range ----- 50-2250 stepless rpm Milling spindle taper ----- MT2 Milling head swiveling ----- +/- 90° Quill stroke ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Condition: good (used), Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm Prodpfx Asfgi Nlsirsc -Weight: 146 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Type: ACS60100163S00C1200901 Predjd Rhdpjpfx Airec -Input: 380-415 V 48/63 Hz -Output: 0...300 Hz -Price: per piece -Number: 2 pieces -Dimensions: 255/285/H420 mm -Weight: 18 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 1,26,772 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,614 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kaeser DSDX243SFC, 132 kW with 8.5 bar and 26.90 m³/min. Frequency inverter integrated. New compressor stage installed at around 45,000 operating hours. Pjdpfxsyhakke Airsrc

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module Prodpfxjyhmx Ie Airsc -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Year of construction: 2019, condition: used, Technical data: - Manufacturer: Cefla Psdpfxjyifv Ss Airerc - Type: TR - Year of manufacture: 2019 - Equipped with its own control cabinet - Feed rate setting: approx. 2.2 - 20 m/min. - Emergency stop - Display for Hz frequency inverter - Transport length: 1,500 mm - Working width: 1,300 mm - Working height: 900 ± 20 mm - Installed power: 0.8 kW - EX ATEX design - Location: in the warehouse

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Pjdpjz N R U Hjfx Airorc Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI Prjdpfx Asz Iypvsiroc - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Pedpfx Ajz Ilu Roirerc Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives Podpfxoz D Aw Uo Airorc - Pallet conveyors below the winder, included in the sale - Operating manual, wiring diagrams and further technical documentation Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: good (used), Polar Mohr R-2 Paper Jogger Machine in very good condition, lightly used. Technical specifications: Maximum format: 820x720mm Stack height: 150mm Weight: 450kg Power supply: 400V Prsdpfxjz Rk H Sj Airoc Air table Right/left shaking option Tilt angle adjustment Jogging frequency adjustment (inverter) Chrome table surface Pneumatically controlled flaps

Condition: used, Year of construction: 1995, Overview This bottle washer-dryer was built in 1995 by the French manufacturer STONE. It cleaned and dried the outside of filled glass bottles ahead of labelling in a wine bottling line with an output of 6,000 bottles per hour, running 375 ml, 750 ml and 1 L formats. The machine combines a rotary washing module (LB20) with vertical rotating brushes and a 3 m air drying tunnel (S20), linked by the bottle conveyor. It is still installed and under power and can be visited on request. Technical data - Manufacturer: STONE - Model: LB20 S20 - Year of manufacture: 1995 - Machine type: bottle washer-dryer (external washing and drying) - Output: 6,000 bottles per hour - Containers: glass bottles - Formats: 375 ml, 750 ml, 1 L - Washing module length: approx. 1,250 mm - Drying tunnel length: approx. 3,000 mm - Overall length incl. conveyors: approx. 7,050 mm, width approx. 1,528 mm - Electrical power: 2 kW - Compressed air: 6 bar (15 NL per cycle) Equipment - Rotary washing module: star wheel carousel with vertical rotating brushes for neck, body and base - Air drying tunnel with blower-fed air ducts along the bottle path - Infeed and outfeed conveyors with infeed star wheel - Set of format star wheels Prsdpfx Aiez Rnc Rjrsc - Stainless steel frame with transparent guard doors - Control panel with emergency stop and separate electrical cabinet with frequency inverter - Layout drawing available Condition Still installed and under power. An inspection on site is possible on request. Dismantling and loading are not included. Availability Available immediately. Location: France.

Condition: like new (used), For sale is a fully functional pallet box washer, used but recently overhauled by the manufacturer. The following components have been newly replaced: chemical dispenser, heating elements, rotary nozzle, complete control system with frequency inverter, and minor parts. The washer features a cycle that first applies foam and then washes the boxes, with two types of nozzles for foaming and washing. Loading and unloading of boxes is carried out by the pneumatic opening of the front door to a position level with the ground. When the door is open, boxes can be loaded either by forklift or manually. A video demonstrating the machine's operation is available. The set also includes two safety barriers for operating the door. Pjdpfx Aisyxv Hworerc

Condition: used, mileage: 400 km, power: 130 kW (176.75 HP), first registration: 10/2025, fuel type: diesel, color: white, gearing type: automatic, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Approved as a 3.88t vehicle * Approved total weight * Standard climate zones * Electronic Stability Program (ESP) * Tow hitch, detachable and lockable * One towing eye at the front * Disc brakes at the front * Increase of approved total weight from 3.5t to 3.88t * All-wheel drive * Leather multifunction steering wheel, heated with Tiptronic * Partition, without window * Three-point automatic seat belts at the front with electric belt tensioner * Normal roof * Double bench seat in the cab on the right with storage compartment * Driver's seat on the left * Extended interior noise reduction * Seat heating for front seats, separately adjustable * Windshield in heat-protective glass, heated * Central locking "Keyless-Go" without safe lock * Safety interior mirror, dimmable * Dashboard with special fittings * Exhaust concept, WLTP3 N1-III, N2//EU6EC * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Rubber floor covering in the cab * Wooden floor in the cargo area * Lateral interior paneling in the cargo area (up to the roof frame) made of plywood * Incomplete truck approval * Sliding door on the right in the cargo/passenger compartment Pedpfszx Nabjx Airsrc * Exterior mirrors left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Sun visors with mirror * 2nd heat exchanger plus 2nd evaporator * Lashing eyes for securing cargo * Lane assist plus emergency assist and traffic jam assist * Radiator protection grille * Rear mud flaps * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on the rear pillar, left + right * Speed limiter up to 90 km/h * Tire pressure monitoring, frequency 433 MHz High * Start/stop system with recuperation * Navigation system (Baseline) * Auxiliary heating with air and water heating, programmable * Park assist * Optional infotainment (MIB3 MP) version 2 * Second battery * High beam assistant * LED headlights * Front Assist with warning and braking for vehicles, pedestrians and cyclists * Windshield wiper intermittent control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control * Fog lights and turning lights * Headlight cleaning system * LED interior lighting concept in the passenger/cargo area * Daytime running light with assistant driving light and coming/leaving home function, automatic * Comfort telephony with LTE and wireless charging * Preparation for Smart TCO * Seat belt control, E-contact in the seat belt buckle * Wired & Wireless App-Connect * 230V inverter and socket for Europe * Country cluster "WLTP EU approval" * BSIS driving direction right, with MOIS * 4-cylinder turbo diesel engine 2.0 L / 130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Distraction and fatigue detection * With socket at the front * 8-speed automatic transmission for all-wheel drive * Preparation for alcohol interlock * Acoustic warning system for engaged reverse gear, can be switched off * Battery 520A (92Ah) * With rear view camera system (version 2) * Air conditioning with electronic control * With crosswind assist * With predictive speed limiter (pLIM) * Seat covers in imitation leather * With UNECE CS&SU * Pan-European eCall * Air conditioning with manual control with additional cooling for the cargo area * Light alloy wheels "Li

Condition: good (used), Baumann BSB 3L Paper Jogger The machine is 100% functional and in very good condition. This is the latest design from a German manufacturer. Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Jogging frequency adjustment (inverter) Prodpfx Aiez R Ipworjc Adjustable air squeezing roller force and speed. Chrome-plated table surface

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 12 mm, overall weight: 8,000 kg, working length: 3,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Max. sheet thickness, steel: 12 mm Tensile strength, steel: 450 N/mm² Working length: 3,000 mm Max. feed rate: 88 mm/s Performance data Power: 22 kW Tool weight: 31.5 kg MACHINE DETAILS Power: 22 kW Input voltage: 380 V Input frequency: 50 Hz Pedjz Nnvbepfx Airerc Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,600 x 2,100 mm Total weight: 8,000 kg External Reference: Zafa - Lot 12

Condition: excellent (used), We offer an industrial frequency inverter/converter, the FLENDER LOHER DYNAVERT. Technical specifications: Manufacturer: FLENDER LOHER Series: DYNAVERT Type: A 2T2A-05400-002BADIOO Item number: 1079041 Serial number: 7375662 Input voltage: 3 × 400 V Input frequency: 50–60 Hz Input power: 4 kVA Output voltage: 3 × V Output power: 3.8 kVA Output frequency range: 0–50–200 Hz Current: 5.5 A Prjdpfxez Spbgs Airec Operating temperature: 0 to +40°C Protection class: IP20 Design: S9 CE marking Made in Europe The device is equipped with an operator panel featuring a display and control keyboard, as well as communication connectors, all of which are visible in the photos. Condition: Used device, in good visual condition. The housing shows signs of use and storage. There is damage/scratch to the housing's paintwork in one area – see photos. The damage is external. The exact unit shown in the photos is the one being sold.

Condition: excellent (used), For sale is an industrial LOHER DYNAVERT frequency inverter with a control panel and display. Technical data: Manufacturer: LOHER Series: DYNAVERT Type: A 2T2A-07400-002BADIP4 MLFB: 6SE0102-1AA15-5AA5-Z EP-No.: L4-100001462 Serial number: 7395649 Year of manufacture: 2011 Supply voltage: 3 × 400 V Input frequency: 50–60 Hz Input power: 3.7 kVA Output voltage: 3 × V Output frequency: 0–250 Hz Maximum output power: 3.8 kVA Output current: 5.5 A Ambient temperature: 0 to +40°C Protection class: IP20 Designation: S9 Integrated TMS thermal protection tripping device EC type examination certificate Psdpjz Spbmefx Airsrc Certificate: PTB 07 ATEX 3057 ATEX marking: Ex II (2) GD Terminals: X3: 90/91 Made in Germany The frequency inverter is used and comes from the dismantling of an industrial installation. Its visual condition is good, with normal signs of use and storage visible in the photos.

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control Podpjx Ah A Ajfx Airerc - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, functionality: fully functional, The conveyor belt is for sale; technical details: Voltage: 220 volts / 50 Hz Frequency inverter: adjustable from 0-6 m/min Pjdpfx Aijz Sxikjrjrc Discharge height: 700 mm Inclined belt length: 1300 mm Usable width: 400 mm Overall width: 600 mm Mobile Height-adjustable Discharge height: 900 mm - 1100 mm Guide plate: 80 mm

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Operated via an electric foot switch. Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Drill diameter: 3–10 mm Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Psdpjz S Un Aofx Airorc Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Prjdpoxz Dqmofx Airoc Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Pedpfxs Aba Nce Airerc Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Prsdpfx Aie Afxvvsroc Documentation/Manual