Used Inverter 110 Kw for sale (36,998)

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Lsdpfxev Rmkxj Afaerh

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Lrjdpfx Afsxbd U Eoaeh

Condition: new, New in original packaging Lodpfsx Rcx Rsx Afasrh

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg Lrjdsrbk Hcjpfx Afash The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: used, ALREADY DISASSEMBLED ‼️ READY TO TRANSPORT ‼️ Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: Lredpfx Afowakktjaoh 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology Prices vary by type – inquire by phone or email! 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear unit SEW type: R40 -Manufacturer motor SEW type: DF12DT71D-4 -Motor power: 0.37 kW -Speed range: 22-110 rpm -Motor: adjustable -height of the shaft axis: 90 mm -Drive shaft: Ø 25 mm -Construction: B3 -Number: 1 piece of motors available Ljdpfjc I Rk Tjx Afajrh -Price: per piece -Dimensions: 590/280/H165 mm -Weight: 28 kg

Condition: used, Gear motor, electric motor -Speed: 110 rpm -Power: 0.18 kW Lrjdpsc Uz Hnofx Afajh -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 54 -Number: 1x gear motor available -Price: per piece -Dimensions: 315/140/H195 mm -Weight: 6.8 kg

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle Lsdpfx Afsc Uz Hujaorh -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 110 rpm -Power: 0.25 kW -Diameter: Ø 15 mm -Construction: B3 angle -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H175 mm -Weight: 7.5 kg Ljdpfx Afjc U I Edeajrh

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm Lodpfxsptf Iaj Afaorh -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor Lrjdjh Ay Rljpfx Afaoh -Type: R40 DT80K-4 -Speed: 110 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 455/190/H155 mm -Weight: 16.6 kg

Condition: good (used), Year of construction: 2011, Temperature control unit, heating system, hot water boiler, hydronic system, hydraulic station for high-pressure cleaner, high-pressure pump Lrodpfxjqw D Dpo Afajh -Temperature control units for: water -Electric heating for: pressure washers, high-pressure pumps -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -Permissible operating overpressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 1,06,362 h, functionality: fully functional, Premium screw compressor Atlas Copco GA110VSD. Lrjdpfx Afeul U Tysaoh Year of manufacture 2012. New stage at 50,000 hours. With WRG. 8.50 bar with 20.70 m3/min.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Ledpfx Afevf E Aveasrh Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), power: 110 kW (149.56 HP), fuel type: diesel, color: yellow, first registration: 01/2015, Year of construction: 2015, operating hours: 13,739 h, Liebherr A916 - 110 KW - Central Greasing - Camera Year: 2015 Hours: 13,739 110 KW engine Central greasing system Camera system = Further information = Model year: 2015 Drive: Wheeled Engine displacement: 4,580 cc GVW: 18,000 kg Technical condition: good Optical condition: good Lrsdpfxsxxavaj Afajh Please contact VAEX The Truck Traders for further information.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Vecoplan Vaz 1100 XL Year 2005 Lrjdsymgdhepfx Afash The machine is in very good technical condition. The knives have been recently replaced. 30 kW motor. The machine is fully operational and ready for use. Testing is possible. For more information, please call.

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Motor: 22 kW Lsdpfx Asur N Tbjfaerh Output: 3.9 m3/min Loaded operating hours: 48,000 h

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 102.5 kW (139.36 HP), type of cooling: air, overall weight: 1,110 kg, total width: 1,350 mm, total length: 2,650 mm, total height: 2,450 mm, warranty duration: 6 months, Aircooled chiller RHOSS WINPACK SE TCAESY 2110 102.5 KW Cooling capacity: 102.5 kW / 29.15 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80295VAB4-1 (scroll) + 1 pcs. Bitzer GSD80182VAB4-1 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA, expansion vessel, buffer tank. Dimensions: 2.65x1.35x2.45 m. Weight: 1110 kg. Working hours: 10659/10659 h. Condition: Good Lsdoxywxnjpfx Afajrh

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification - Output: 110 kW - Year of manufacture: 2010 - In operation since: 2010 Lrodpfx Afsxa Evboajh - Fuel feeding: automatic, with screw conveyor

Condition: used, Electric motor, three-phase motor Lrsdpfx Aeghnftofaeh -Power: 0.125 kW -Speed: 1100 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 235/190/H160 mm -Weight: 10 kg

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas train) - Output: 100–1100 kW - Version: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas train) - Output: 100–1000 kW - Version: ZM - Year of manufacture: 2013 (2 units available) 3. WEISHAUPT WM-G10/3-A, (with gas train) - Output: 125–900 kW - Version: ZM-LN - Year of manufacture: 2011 4. WEISHAUPT WM-G10/3-A, (with gas train) - Output: 100–1000 kW - Version: ZM - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas train) - Output: 100–1000 kW Ljdewgyrtopfx Afaerh - Version: ZM - Year of manufacture: 2009

Condition: ready for operation (used), power: 5.5 kW (7.48 HP), rotational speed (max.): 6,500 rpm, Equipment: documentation/manual, 5,5 kw 6500 rpm , 1,5 mc/h fruit juice Lsdpsx Ur H Ejfx Afaerh

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Ljdpfx Afoua Eu Nsaerh Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 Lredpfx Afeyga Ugoaoh The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Engine: 160 kW Lredpfxjm Uc R Uo Afaoh