Used High Frequency Generator for sale (32,875)

Condition: excellent (used), Year of construction: 2005, operating hours: 3,328 h, functionality: fully functional, total height: 1,900 mm, total width: 1,000 mm, total length: 1,000 mm, empty load weight: 900 kg, This machine has rather few operating hours. I can also sell Orma press with this machine. Iodpfsxfqgiox Ab Ija

Year of construction: 2001, condition: used, SECOND-HAND H.F. GENERATOR ELETTRONICA CAVALLO MOD. GAF 50KW - CE RULES - Double exit - Year 2001 Isdemzbkkepfx Ab Ioa

Condition: ready for operation (used), Technical characteristics 150 bar hydraulic unit useful dimensions 2600 mm x 1000 mm 6 horizontal single-acting jacks with flat or edge locking (clamping high parts) 2 vertical hydraulic pressers high frequency unit for rapid setting of glued assemblies 3 zone hydraulic control ideal for frames, panels, furniture element frames, stairs, fixtures Power and Motors Overall dimensions Ijdetgnivopfx Ab Isa Lenght: 3000 mm Width: 1800 mm Weight: 1500 Kg

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Iedpfexbta Dsx Ab Iea Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Year of construction: 2015, condition: used, 2015 | Wacker Neuson IRFU57 10M High-frequency hammer 57 mm throat 10 m | Used Small Equipment ❓ Want the expert inspection report with 0 checked points, 7 extra photos and a full video? Contact us! Iodsx Aghdjpfx Ab Iea 💡 Listed in a Bid-to-Earn auction: ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Condition: like new (used), functionality: fully functional, TAWI High-Frequency Vacuum Lifter Ijdoxx Sv Sopfx Ab Ija Built for speed and precision in logistics, warehouses, and packaging lines. One-handed lifting system easily handles boxes, baggage, drums, and food-grade items. High frequency manual handling device for where speed is critical. Overhead rail system 11.5 x 3m, divisible in half, the rails can also be increased in width (330kg weight). Max load of overhead rail system is 60kg. 3 lifting heads included (50kg capacity). 1. Lifting plate = 160mm diameter round. 2. Lifting plate 240 x 360mm 3. Lifting plate 300 x 100mm

Condition: used, total length: 1,200 mm, total width: 900 mm, total height: 2,200 mm, Empty weight: 950 kg - Documentation available: No - CE certificate present: No - Serial number: 4715 Iedpfjwrbntjx Ab Ioa - Number of outputs [pcs]: 1 - Transport dimensions: 1200mm x 900mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), High frequency spindle Make Precise Type SC 60121 Speed 7500 - 30000 Hertz 250-1000 Volt 88-250 13 kw Diameter 120 mm Total length 420 mm Isdpfsu Numvsx Ab Isa Weight 22 kg

Condition: used, Technical details: Ijdpevb A Ubjfx Ab Ioa turning speeds: 10000 U/min output: 22 kw weight approx.: 20 kg transmission ratio: 1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case. *

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position - Pneumatic profile clamping system Iedpfxsra Nrqj Ab Iea - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor

Condition: good (used), 2 kW high-frequency inverter Ijdpfxjv N Nygo Ab Ija for soldering or joining

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 Iodpfxown H Auo Ab Ija 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: used, - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT Ijdpfxswh Nuyo Ab Iea VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: as good as new (ex-display), High definition HD generator for plasma cutting. New never used from stock. Ready for delivery except sold. Ijdpfxog Tcufo Ab Ija Bargain.

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Ijdequ Ubujpfx Ab Ija

Condition: used, High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm Iodpfxed Iy Nro Ab Ija -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Iedpjwgi Siefx Ab Isa Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length Iedsv Ayftspfx Ab Iea • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: used, functionality: fully functional, High frequency welding machine Kiefel KH 6000 C-Press height adjustable Generator Kiefel G 20000 SB Table size 1350x800 mm Iedpfx Abov A Uddo Ija

Condition: new, Welding system for sliding tarpaulins, 2.7KW HF power. Operation via touch panel, automatic power control, with integrated quiet compressor on request, with table and guide rail. Also available without a table on request, e.g. when replacing existing systems such as Herfurth PLTR300/400, the guide is adapted to the table. (Image 2) Table frame made of aluminum profile, 30mm worktop, length as desired Iedovw S Snspfx Ab Ija We currently have between 4 and 6 months of construction time Image 3 a mobile PSA150 system with 15KW power and Image 4 an SP45 for sliding with 4.5KW All data and inquiries are welcome by email

Year of construction: 2007, condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Iodjwal H Njpfx Ab Ija

Condition: ready for operation (used), functionality: fully functional, input voltage: 480 V, input current: 110 A, type of input current: AC, input frequency: 400 Hz, Manufacturer / Model: Telemecanique / Schneider Electric – Altivar 21 (units: SVRTV-7-1 / SVRTV-7-2) Application: Motor speed control for industrial fans and pumps (HVAC / ventilation / process air). Technical data: Power rating: 55 kW / 75 HP Supply: 380–480 V AC, 3-phase Input current: ~105–110 A Frequency range: 0.5–400 Hz Control mode: V/F (voltage/frequency) control Interfaces: Modbus, analog inputs Operating modes: LOC/REM (local/remote) Ijdpfx Asxzdpceb Isa Enclosure rating: IP20 / IP21 Integrated HMI with RUN/STOP, MODE, ENT, navigation keys Quick setup parameters (ACC/DEC, frequency limits, thermal protection, V/F curves) Clean internal components; installed in HVAC/air-handling applications Condition: Excellent condition; clean enclosure, functional HMI; normally used for supply-air fan drives. No visible damage.

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Ijdpfxsv A Rppe Ab Isa Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Iedpjxmgq Tsfx Ab Ioa Maximum cutting width: 400 mm MACHINE DETAILS Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: excellent (used), Used CHP Plant Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 28,901 h Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Available: 3 units Indop 50 kW at €13,400 each Ijdpfjwthzisx Ab Ija 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 Test run possible.