Used Fume Cupboard for sale (469)

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Dsdpfxeqay Uvj Agfsur Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, ⭐⭐⭐⭐⭐ ✈️ 15-day delivery ✈️ Shipping möglich✈️ ✅✅✅Energy class A+++✅✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ➖➖➖➖➖ *plus VAT, plus shipping ►►Immediate purchase◄◄ ➖➖➖➖➖ ✳️Behalten Protect your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-purchase, warranty or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰FASTEST delivery time❗ ⌛⏰►►► Device features ► Touch operating elementsIndustry 4.0 ► Digital operating instructions in 4 languages ► Possibility to save 100 different operating parameters Wi-Fi connection and remote access ► 32-bit Cortex 18 ARM microprocessor 600 Mhz128 RAM ► 7'TFT touch screen 17.17 M colors Djdpfx Agstpxpfsfsur Ergonomic body design ► Robust, explosion-proof fume cupboard structure ► Nozzle types for different coating styles ► Injection-molded cascade structure with increased tightness IP 6x ► 420 gr. Easy to use due to its light weight ⚡️⚡️⚡️Es is ATEX certified.⚡️⚡️⚡️ ➖➖➖➖➖ ☘️Umweltfreundlich☘️⚡️Grüne Energie⚡️☘️ ☀️ 2 YEAR WARRANTY ☀️ ☀️Wir have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, functionality: fully functional, Year of construction: 2026, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. Dedpfx Ageq Nxp Ssfsur 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs. Dsdpfx Ajhq Dbxogfour -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance. -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands. Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: excellent (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Duedpfeyznk Hox Agfsr -Filter holder: Gauze holder for extraction, mobile -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,830 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details. • Condition: Very good, fully functional • Working hours: 3830 h • Machine under power: Yes • Cutting system: CNC plasma / oxy cutting • Plasma generator: PP130A (included) • Max cutting thickness: up to 30 mm • Machine parameters: • Installed power: 4 kW • Power supply: 400 V / 3 PH / 50 Hz • Input current: 6 A • Plasma generator parameters (PP130A): • Max power consumption: 26 kW • Power supply: 400 V / 3 PH / 50 Hz Djdpsyzg D Ssfx Agfsur • Max input current: 40 A • Weight: 520 kg • Documentation included: user manual, operation manual, technical documentation

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S Duedpfx Ageyi Twgjfor ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Dusdpfx Agewk R A Dofjr Condition: excellent, as new Equipment (standard + options): - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2006, condition: good (used), Welding fume extractor,dust collector,self-cleaning filter,pneumatic,vacuum RITTER brand. For welding, grinding, sandblasting and all kinds of dry dust. Cartridge filter in good condition. Dedpfshyg Ivjx Agfjur The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. The device for continuous operation Fan in sound absorbing housing with power 2,2 Kw Capacity 1200 m3/h Filtration surface 10 m2 Additionally equipped with automatic spark detection and extinguishing system. The spreading of sparks is usually caused by the operation of production machinery or material contamination. The result is downtime and loss of business, and often a serious threat to human life. Therefore, in order to eliminate such risks, pneumatic and mechanical conveyor systems must be monitored for sparks and protected by spark extinguishing systems.

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Dusdpfx Aei Atb Togfjr Technical documentation included dimensions: width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) Dsdpfxexaal Rs Agfour - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Djdpfjvvizkox Agfeur Storage location: Garbsen

Condition: like new (used), Year of construction: 2016, Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Source power: 3 kW Working area: 3000 mm × 1500 mm Dodpsyhppvjfx Agfsur Laser source: Rofin FL030 fiber laser source Source serial number: 987 Source year: 2015 Additional equipment: Thermotec chiller – cooling unit for stabilizing the laser source temperature Donaldson Torit DCE DFPro-4SPK – extraction and filtration system for laser fumes Automatic loading/unloading table Light guard – light protection system

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VTC 760 was manufactured in 2020. It features an X-axis travel of 1740 mm, Y-axis travel of 760 mm, and Z-axis travel of 660 mm. The machine includes a spacious table size of 2300 x 760 mm and a maximum workpiece weight capacity of 1400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 760 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth G • Table size: 2300 x 760 mm • Distance table to spindle nose: 180 mm • Max workpiece size: 4100 x 905 x 790 mm • Table surface: T-slots • Max workpiece weight: 1400 kg • Rapid feed (X/Y/Z): 42,000 mm/min • Coolant pressure: 18 bar (additional tank) Additional equipment • Fume extractor • Schunk vises • Zero-point clamping system • Nakanishi high-speed spindle (50,000 rpm) • Tooling sets with cabinets and benches Technical Specification Dujdpeyxdtfefx Agfor Taper Size ISO 40

Year of construction: 1993, condition: good (used), Central vacuum system for dust , fumes and solids in industrial facilities. VAC unit is a suitable choice of high vacuum system for extraction of welding fumes, dust from grinding, polishing processes. Djdsn Nvw Aopfx Agfour Capacity of 3000 m3/h at a vacuum of 19000 Pa Maximum vacuum - 22000 Pa Inlet diameter - 200 mm Motor power - 37 Kw FlexFilter F 12 B TFE filter units x 2 pieces included. Max airflow: 1,600 m3/h (900 CFM). Max. vacuum: - 50 kPa (7.25 psi). Separation: ≈99.95% (fine dust).

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm Duodpfxjyvlxde Agfor MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dedpjvccc Ijfx Agfjur Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Duedpfxou T Hrps Agfor Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: CypCut, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 3000W, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 80 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning speed: 80 m/min, positioning accuracy: 0.02 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,700 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Fiber laser cutting machine 3000W 1500×3000 is a modern CNC device designed for precise metal cutting in industrial applications. Thanks to the use of an efficient Raycus laser source and the advanced CypCut control system, the machine ensures high accuracy, repeatability, and ease of operation. Its solid, welded and stress-relieved structure guarantees operational stability and resistance to deformation, resulting in long service life and reliability. The machine offers a large working area of 1500 × 3000 mm and high travel speeds of up to 80 m/min, enabling efficient processing of both individual parts and mass production. The WSX cutting head with automatic focus adjustment (autofocus) ensures optimal cutting parameters for different materials and thicknesses, significantly reducing the need for manual adjustments and increasing productivity. The device can handle a wide range of materials such as carbon steel, stainless steel, aluminum, brass, and copper, delivering clean edges and high-quality finishes. An additional advantage is the use of high-quality components such as INOVANCE servo drives, linear guides, and a reliable S&A water chiller, ensuring stable and continuous operation even in 24/7 mode. The machine is designed with user safety and comfort in mind, offering safety systems, easy access to controls, and the possibility of integration with additional systems such as fume extraction or automated loading. It is an efficient and cost-effective solution for companies seeking modern laser cutting technology. Delivery to the customer is available. Delivery cost is calculated individually by the transport company. Duedpfx Ageyw R Rnofsr If you are interested in other machines, we encourage you to visit our website.

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Dedpfxew I A N As Agfour

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, load capacity: 6 kg, arm reach: 810 mm, controller model: S4C+ M2000, teach pendant manufacturer: ABB, teach pendant model: S4C+ M2000, type of input current: AC, repeat accuracy: 0.03 mm, A professionally integrated, turnkey robotic workcell featuring the high-speed ABB IRB 140 6-axis robot, S4C+ M2000 controller and teaching pendant. This unit has been safely stored in a climate-controlled environment and has recently been powered on and tested. Full video of the robot jogging in all axes is available upon request. Dusdpfxeyvicyj Agfsr Technical Specifications Robot Model: ABB IRB 140 (6-Axis) Reach: 810 mm Payload: 6 kg Controller: ABB S4C+ M2000 Repeatability: 0.03 mm Workcell Features (Included) Professional Enclosure: Heavy-duty aluminum extrusion frame (Item/Bosch type) with high-visibility acrylic windows. Operator Interface: Integrated monitor, keyboard tray, and Teach Pendant mounting station. Safety System: Fully wired E-stop loop, door interlocks, and industrial stack light (Signal Tower). Exhaust System: Integrated ventilation and ducting setup, ideal for painting, gluing, or fume-generating tasks. Transportable: The entire cell is built on a rigid base, making it easy to move via pallet jack or forklift. Full package price: €7000 Robot only: €5000

Condition: new, Year of construction: 2020, functionality: fully functional, operating hours: 10 h, SPECIAL OFFER / 6-Axis Robot Machining Center 🔥 Universal 6-Axis Robot Center – Milling, Welding, Grinding, 3D Printing & More | Modular configuration available from €49,000 to €99,000 (net) Product Details • Year of manufacture: 2020 • Condition: NEW – The system was exclusively used for demonstration and promotional purposes. No heavy-duty or machining work was performed. • Original price: €199,000 (net) • Warranty: 1-year warranty on the system Highlights and Features 1. OCTOPUZ Software o Value: €25,000 o Serves as the interface between the KUKA controller and SolidCAM. This powerful software makes programming easy and efficient, especially for complex machining tasks. 2. Precision KUKA Robot o Value: €85,000 o Exceptional precision and reliability, perfectly suited for demanding applications such as milling, cutting, welding, grinding, polishing, including material handling. o Handheld control panel. o Up to 5,000 mm working range. o Up to 120 kg load capacity. 3. High-quality KEB Controller o Value: €15,000 o Supports automatic tool changing, spindle control, and specific add-on modules such as:  Chip, vapor and fume extraction  Welding torches  Tool heads for a range of applications 4. High-Speed Spindle o Value: €5,000 o Perfect for precise machining of steel, aluminum, wood, plastic, and other materials. 5. Robust Frame with Large Machining Table o Value: €20,000 o Aluminum table for horizontal and vertical machining, ideal for both small and large workpieces. Note: The stated values refer to the pure component costs without fasteners, adapters and brackets, as well as assembly and machining costs. Applications and Advantages This robot machining center is extremely flexible and can be used for a variety of tasks: • Milling: Complex, three-dimensional geometries with the highest precision. • Welding: Integration of a welding head for versatile metal processing. • Material Handling: Automatic workpiece feeding for increased efficiency. • Surface Processing: Polishing, grinding or deburring. The machining center is ideally suited for integration into a fully automated production line. Sale Price and Options • Special offer: €113,000 (net) for the existing system in its current configuration. • Modified version: €149,000 (net) for customer-specific adaptations, such as the integration of tool changers, welding or laser cutting heads. (Welding and laser units not included in the price and must be provided separately.) Inspection and Delivery • Connection: The system is ready for operation and can be inspected at any time. • Delivery time: Immediately available. Lead time for modifications upon agreement. • Disassembly and transport: Not included in the price. Additional Advantages • Future-proof: Expandable and adaptable for new applications. • Mobility: Usable at different locations. Duodpfou T Rx Tsx Agfjr • Cost-effectiveness: Saves time and costs due to multifunctional capabilities. Do you have any further questions or would you like individual consultation? We are happy to assist you!

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 5500 mm Measurements depth 8100 mm Dodjx D Nuispfx Agfour Measurements height 2500 mm Main Drive Number of axis 4 Additional Equipment Dust & Fume Extraction System: Air Flow: 12000 m³/h Filter Area: 171 m² This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 Duedpox D Iv Eofx Agfor This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), operating hours: 2,085 h, functionality: fully functional, MAMO LEGA 420 Semi-automatic hotmelt perfect binder with adjustable milling depth for optimal spine processing, adjustable glue application, and automatic cover pressing with adjustable pressure and timing settings. The binding process can be performed either in manual or automatic mode. Machine settings are made via an intuitively operated touchscreen. Includes extraction unit for paper dust and fumes. Technical data: Dedpfxsyzg Nns Agfour Speed: up to 180 bindings/hour Binding length: up to max. 420 mm Binding thickness: up to max. 50 mm Dimensions: 1300 x 700 x 920 (mm) Weight: approx. 280 kg Voltage: 230 Volt / 16 A