Used Cabinets for sale (3,408)

Condition: ready for operation (used), Condition Used Stock Number 55205 This listing is for a Walker Safety Cabiets All-In-One Fumigation Unit. The unit is in full working condition and is ready for immediate release. The Walker Safety Cabinets All-In-One Fumigation Unit is an innovative and compact solution for fumigating safety cabinets of all makes and models. Designed with efficiency and convenience in mind, this unit combines a built-in boiler and a carbon filtration system into one easy-to-use device. Key Features:Compact Design: Height: Less than 200 mm, allowing it to fit inside a typical safety cabinet opening without the need to open the door egrated System: Combines a boiler and carbon filtration system, ensuring comprehensive fumigation in a single acity: Maximum capacity of 30 ml of formaldehyde and 30 ml of water, making it effective and economical for fumigation bon Filtration: Replaceable Carbon Granules: Requires replacement after each use to ensure optimal sh Supply: Carbon granules are inexpensive and readily available, with a typical shelf life of approximately 18 ker Safety Cabinets ensures quick delivery of replacement granules for uninterrupted efits: Versatile Compatibility: Effective for fumigation of all safety cabinet brands and icient Operation: The compact, integrated design minimizes space requirements while maximizing t-Effective Maintenance: Affordable and easy-to-replace carbon granules keep operating costs low. Applications:The All-In-One Fumigation Unit is ideal for laboratories and facilities that require effective and convenient fumigation of safety cabinets, ensuring a safe and sterile work environment. Cjdpfevyvqgox Abcorh

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Credpfx Aeu Impmebceh Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches Crjdjwaypfspfx Abcoh System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) External dimensions: H x W x D 1922 x 800 x 893 mm Weight: 324 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), 2 pieces of absolutely new wardrobe cabinets, 4 parts Compartment size: 500 x 400 x 1800 mm high Cjdpfx Abjvw Tzwecerh

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. Crjdewf Dwwjpfx Abcsh ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: used, Year of construction: 1988, height 1000 mm width 720 mm depth 720 mm Cedpfx Abehmmcwocsrh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling Credpfx Abocr U Ureceh “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. Crsdpfxeu Impto Abcoh 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Year of construction: 2005, condition: good (used), several used control cabinets H&G screw compressors. Functional H&G switch cabinets Codjgyty Topfx Abcorh Height: 60 cm width: 38 cm Depth: 21 cm The mentioned sales price is plus 19 % VAT, ex yard.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). Cjdowc Nrnopfx Abcsrh To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" Credpjh T Dvtsfx Abcsh KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, width 900 mm depth 450 mm height 1800 mm weight 0,152 t High quality professional tool cabinet. Codpju Imh Nofx Abcorh This cabinet consists of two separate boxes that are mounted on top of each other can be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep. Both shelves are adjustable in height and can hold 150 kg each Shelves are loaded. The drawer cabinet is equipped with 6 drawers of 100 mm height. One Drawer is 200mm high. Max. load per drawer is 100kg. All drawers are centrally locked.

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) Crjdpfx Aolkbn Iobcsh C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg 5 St. Professional tool trolley for workshop equipment. Cjdpfeu Immfox Abcorh Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm.

Condition: excellent (used), Through-feed System (of the furniture cabinets) Mechanical pressing system (with asynchronous motors + inverter) Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4500 Movable vertical pusher and Movable horizontal pusher SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 200 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Cjdpfx Ajgz Acajbcorh Maximum height of the furniture cabinet (mm) 1200 Motorized in-feed carpet to the Press Clamp Length of the carpet in feeding to the Press Clamp (mm) 2500 Electronic programmer PLC (Separate electric and command cabinet) Total installed power (Kw) 7 Stapling Gun E/S 250 (Automatic)

Condition: new, range L-W-H 710 x 510 x 900 mm weight 52 kg Crodpfeu Imkqex Abceh 5 St. Professional drawer cabinet for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm.

Condition: new, width 920 mm depth 420 mm height 1950 mm weight 70 Kg Practical tool cabinet with 4 shelves Csdpfeu Imi Tex Abcerh Color RAL 6035

Condition: new, 8 St. range L-W-H 710 x 510 x 900 mm weight 60 kg Drawer cabinet with 7 drawers Drawer dimensions 600 x 435mm Crsdpou Imimofx Abcjh Drawer height: Load 1 - 7, 81mm Load 8, 173mm

Condition: new, width 800 mm depth 380 mm height 1800 mm weight 70 Kg Cabinet with 4 shelves. Maximum load per shelf 40 kg. Cjdpfsu Immlex Abcsrh Color code 7035. Weight 75kg.

Condition: new, 6 St. range L-W-H 720 x 580 x 800 mm weight 100 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Cjdpfxevblibs Abcsrh Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, width 900 mm depth 450 mm height 1800 mm weight 0,152 t High quality professional tool cabinet. This cabinet consists of two separate boxes that are mounted on top of each other Crodevn U Hpepfx Abcjh can be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep. Both shelves are adjustable in height and can hold 150 kg each Shelves are loaded. The drawer cabinet is equipped with 6 drawers of 100 mm height. One Drawer is 200mm high. Max. load per drawer is 100kg. All drawers are centrally locked.

Condition: new, 8 St. range L-W-H 880 x 580 x 1000 mm weight 156 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. Crjdpfxou Imf Io Abcoh 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 9 St. range L-W-H 1,36 x 0,46 x 0,95 mm weight 115 kg Drawer cabinet Dimensions of drawer 1 124.5 x 40 x 10 cm (W x D x H) Dimensions of drawers 2 to 5 56.5 x 40 x 6 cm (W x D x H) Dimensions of drawer 6 56.5 x 40 x 14 cm (W x D x H) Dimensions of drawers 7 and 8 31 x 37 x 53 cm (W x D x H) Cjdpfx Asu Imqkobcorh Thickness of worktop 4 cm External dimensions of stacking boxes 10.5 x 13.5 x 7.5 cm (W x D x H) External dimensions of waste bin 25.5 x 32 x 38 cm (W x D x H)

Condition: new, 6 St. Crjdpfx Abjupxrbscsh range L-W-H 880 x 580 x 800 mm weight 126 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 2 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 8 St. range L-W-H 710 x 510 x 900 mm weight 67 kg Crsdpfxovblhqj Abcsh Schubladen schrank mit 8 Schubladen Schubladenabmessung 600 x 435mm Schubladenhöhe: Lade 1 - 8, 81mm