Used Gas Stove for sale (3,878)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,753 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: gas, mast type: triplex, construction height: 2,130 mm, power: 28 kW (38.07 HP), empty load weight: 2,790 kg, drive type: Erdgas, LPG Forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Solid rubber Front tyre condition: 80 - 100% Rear tyre type: Solid rubber Rear tyre condition: 80 - 100% Description: Front forklift - LPG forklift LINDE H16T Operating hours according to display - Year of manufacture: 2017 - 1.6 ton lifting capacity - 4.62 m lift height - 2.13 m overall height - Side shifter - Fork positioner - Triplex free lift mast - Protective roof - Lighting system - 4-cylinder VW LPG engine, 38 HP - Solid rubber tires approx. 90% - Single pedal control - White non-marking tires - Including operator's manual - Recently serviced - Very maneuverable forklift - Original paintwork - Good condition - 3 units H16T in stock - all year 2017 - 4116 + operating hours - Gkedpjxcr A Tjfx Aaboc Special price available when purchasing all 3 units! Side shifter, fork positioner, third valve, fourth valve, work light rear, work light front, roof cover, single pedal,

Condition: used, Gas boiler Gedow Iz Svjpfx Aabjkc 5MW with full chimney and circulation pump Manufacturer: Viessmann Model: M14800A Year: 2015

Condition: used, machine/vehicle number: 26160, Year of construction: 2018, operating hours: 13,578 h, load capacity: 5,000 kg, lifting height: 4,400 mm, fuel type: gas, mast type: standard, construction height: 3,140 mm, Device details: Year of manufacture: 2018 Load capacity: 5000 kg Lift height: 4400 mm Recorded operating hours: 13,578 h Mast type: Standard Mast height: 3,140 mm Length/width/height: 3,196 / 1,448 / 2,430 mm Operating weight: 7,060 kg ---- Equipment: * Overhead guard * 3rd valve * Semi-cab * Front work lights * Rear work lights ---- Additional equipment information: Bluespot Reverse alarm Beacon ---- The operating hours stated refer to the hours read from the meter. We are happy to offer suitable transportation for you. A further 250 - 300 forklifts, attachments, and sweepers are immediately available. Rental options available as well! We are happy to buy your OLD machine. Any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! Gkjdpfx Aajxm S Dfebjc We speak English. Subject to prior sale and errors in this offer. In B2B transactions, the device is sold as is, unrefurbished. All information is provided without guarantee; errors and changes excepted.

Condition: excellent (used), Year of construction: 2011, Schwingenschlögel LNG tank filling station Methan Gas Cryogenic tank gas tank trailer German Cryogenic gas semi-trailer for LNG (liquid methane). Tank filling station Manufacturer: Schwingenschlögel EU approval. Year: 2011 Full working condition with valid certificates. Gkjdpfx Ajtzcdrsabjc We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCV-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm Godpjrp Dmbsfx Aabskc - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,750 mm, total length: 3,980 mm, - Antrieb Treibgas - Bedienung Sitz - Tragfähigkeit/Last kg 3000 - Lastschwerpunkt mm 500 - Lastabstand mm 485 - Achslast mit Last vorn/hinten kg 6230/980 - Achslast ohne Last vorn/hinten kg 1490/2720 - Spurweite vorn mm 1010 - Spurweite hinten mm 965 - Neigung Hubgerüst vor/zurück Grad 6/11 - Sitzhöhe mm 1110 - Kupplungshöhe mm 335 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4115 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4315 - Wenderadius mm 2430 Gkjdpfx Aoxd Hz Teaboc - Kleinster Drehpunktabstand mm 720 - Fahrgeschwindigkeit mit/ohne Last km/h 18,5/19,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,55 - Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,50 - Steigfähigkeit mit/ohne Last % 23 - Max. Steigfähigkeit mit/ohne Last % 26/20 - Betriebsbremse Hydraulisch - Motorleistung nach ISO 1585 kW 44 - Nenndrehzahl 1/min 2570 - Zylinderzahl / Hubraum cm3 4/2237 - Arbeitsdruck für Anbaugeräte bar 147 - Ölstrom für Anbaugeräte l/min 65-74 - Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 77

Condition: excellent (used), Year of construction: 2000, used Weishaupt burner ----- RGL70 2-A/ ZM Gsdpfx Aaexf Dzysbjkc year of manufacture: 2000 output: 1,000 - 10,500 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,263 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355/50-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🌍 Years of experience | 🛠️ In-house service and paint shop | 🤝 Professional consulting | 🚛 Own transport fleet | 🔧 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts with years of industry experience. We supply clients across Europe — from small businesses to large international manufacturing plants. Our forklifts are more than just machines — they’re a guarantee of smooth and reliable logistics for your operations. What sets us apart? ✔️ Every forklift undergoes a comprehensive technical inspection (servicing, testing, replacement of filters and oils, refurbishment of key components) 📑 Optional full UDT certification on request 🎨 In-house paint shop and service workshop — forklifts refined both visually and technically 🚛 Europe-wide transport — handled by our own fleet and trained drivers 🎓 Operator training on delivery + functional testing at the customer site 🔧 After-sales service and technical support — we’re here for you even after the purchase 👀 Viewing and test drives available at our headquarters — you’re welcome 🌟 Hundreds of satisfied customers all over Europe — join those who already trust us 💰 Financing support — we work with most leasing companies 💳 Invoice in EUR or PLN — as you prefer OFFERED FOR SALE: COMBILIFT C5000 – Four-way forklift / multidirectional forklift / four-directional drive forklift / multidirectional drive forklift 📅 Year of manufacture: 07/2017 ⏱️ Operating hours: 4,263 h 🔋 Fuel: LPG Godpoxgb N Dsfx Aabokc 🏋️ Load capacity: 5,000 kg 📦 Mast: Triplex – 6,000 mm 📏 Free lift: 2,700 mm 🔩 Fork positioner | Forks 1,500 / 150 / 50 mm 🛞 Superelastic tyres: front 23x10-12, rear 355/50-15 ✅ Technical condition: Excellent – after major service ✨ Visual condition: Well-maintained, corrosion-free, ready for use DIMENSIONS: 📐 Forklift height: 2,600 mm 📏 Overall height (with mast): 3,900 mm ⬆️ Lifting height: 6,000 mm 📦 Overall length: 2,500 mm ↔️ Width: 2,250 mm ⚖️ Weight: 7,200 kg IDEAL FOR: 🏭 Warehouses with narrow aisles 🌲 Timber, steel, and tube industries 📏 Handling of long loads 🏢 Indoor and outdoor operations FT Logistics – Quality we stand behind. Service you can trust.

Condition: used, machine/vehicle number: 26159, Year of construction: 2015, operating hours: 4,076 h, load capacity: 1,600 kg, lifting height: 3,850 mm, fuel type: gas, mast type: standard, construction height: 2,470 mm, Equipment: sideshift, .: 26159 Equipment details: Year of manufacture: 2015 Load capacity: 1,600 kg Lift height: 3,850 mm Read operating hours: 4,076 h Mast type: Standard Mast height: 2,470 mm Length/Width/Height: 2,212 / 1,086 / 2,130 mm Operating weight: 3,040 kg ---- Features: * Overhead guard Gsdpjxm S Azjfx Aabjkc * 3rd hydraulic valve * Overhead roof cover * Full free lift * Front work lights * Rear work lights ----- Attachments: * Sideshift * Load backrest ---- Additional equipment information: Bluespot Reversing alarm Beacon light ---- The operating hours stated are always as read on the meter. We are happy to offer you suitable transport solutions. A further 250 - 300 forklifts, attachments, and sweepers are available for immediate delivery. Of course, rental options are also available! We will gladly buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Subject to prior sale and errors. For dealer sales, the equipment is sold as-is, not refurbished. All details without guarantee; errors and alterations excepted.

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Gjdov Srw Tspfx Aabekc Fuel: Diesel or gas Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 180 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Gsdpfx Aowhr Rkoabekc Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: used, Year of construction: 2000, load capacity: 7,000 kg, lifting height: 5,660 mm, total length: 4,900 mm, Gas forklift Clark CGC 70 Drive Gas Year built 2000 Lifting height (mm) 5,660 Lifting weight (kg) 7,000 Gksdpfx Aexd Hztsaboc

Year of construction: 2021, condition: excellent (used), functionality: fully functional, We offer a gas sterilizer nastol with neutralizer in perfect condition. Gjdoukgxxepfx Aabskc Year of production: 2021 Brand: H.W.Andersen Products Limited, Anprolene Model: Anprolene 74i, Abator Anprolene

Condition: used, functionality: fully functional, Instrumentation Laboratory GEM Premier 4000 Blood Gas Analyzer. The GEM Premier 4000 is comprehensive whole blood analyzer, offering a flexible analyte menu including pH, pO2, pCO2, electrolytes, metabolites and onboard CO-Oximetry. Yet it’s remarkably easy to use and maintenance-free, making the GEM Premier 4000 ideal for busy labs, use at the point-of-care and everywhere fast turnaround is mandatory. Easy to learn, simple to operate and complete, IL’s GEM Premier 4000 with iQM revolutionizes whole blood testing. Gsdpfjupvypjx Aabekc 2 for sale. 1 piece/350 EUR. Good working condition. Please check out our other listings as well.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Heidebrenner stool stove Gjdpfx Aegx T A Noabskc Gas cooker Model: AKO 70 1-leaf gas burner Stainless steel version with chassis for bottles of gas Nominal heat load 3.8 kW Dimensions: 410 x 410 x 700 mm, WxDxH Used equipment cleaned Visit our large bakery machines warehouse!

Condition: excellent (used), Year of construction: 2016, Orca 8,2 m3 tank gas argon cryogenic Manufacturer:Scania Gjdpfx Aaou Snghsbekc Year: 2016 Mileage: 425000 km Capacity:8,2 m3 We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail

Condition: good (used), mileage: 1,76,778 km, power: 250 kW (339.91 HP), first registration: 03/2015, color: white, axle configuration: 6x2, tire size: 315/80R22,5, wheelbase: 4,300 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, traction control, = Additional options and accessories = - Second diesel tank - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Fixed fifth wheel - Short cab - PTO (power take-off) - Pump - Central lubrication = Notes = Number of axles: 3, Configuration: 6x2, Kerb weight: 16,085 kg, Gross weight: 28,500 kg, Second diesel tank, Fifth wheel: Fixed, Number of diff locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Rear-view camera, Lighting type: Halogen lamp, Climate control, Flashing lights, Engine power: 250 kW (335 HP), Fuel: Natural gas, Euro standard: 6, Transmission type: Opti-cruise, Gearbox type: Scania, Gears: 12, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Body build year: 2015, System type: Pusher 4000 OB, Pump, Seating configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual = Further information = Driveline Fuel type: Natural gas Transmission Gearbox: SCA, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Gkodexfqxxopfx Aabjc Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tyre tread left: 3 mm; Tyre tread right: 5 mm Axle 2: Twin tyres; Tyre tread left inside: 9 mm; Tyre tread left outside: 5 mm; Tyre tread right inside: 5 mm; Tyre tread right outside: 5 mm Axle 3: Lift axle; Steered; Tyre tread left: 5 mm; Tyre tread right: 4 mm Dimensions Dimensions (L x W x H): 1,040 x 255 x 366 cm Weights Unladen weight: 16,085 kg Payload: 12,415 kg Gross vehicle weight (GVW): 28,500 kg Functional Pump: Yes Maintenance APK (vehicle inspection): valid until 04.2026 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simply! • Large, quickly changing inventory • Recognizable quality • Competitive pricing • Reliable business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • Assured 'recognizable quality' • And more.... Visit our website for special offers and our complete stock. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2020, load capacity: 8,000 kg, lifting height: 4,000 mm, fork length: 2,400 mm, total length: 6,460 mm, Gas forklift Linde H 80T-03/900 Drive Gas Gedpfxjxd Hn Ho Aabokc Year built 2020 Lifting height (mm) 4,000 Lifting weight (kg) 8,000 Fork length (mm) 2,400

Condition: used, Year of construction: 2014, load capacity: 8,000 kg, lifting height: 4,470 mm, total length: 6,380 mm, Gas forklift Gkedpfjxd Hmpsx Aabec Linde H 80T/900/396 Drive Gas Year built 2014 Lifting height (mm) 4,470 Lifting weight (kg) 8,000

Condition: used, Year of construction: 2004, lifting height: 8,000 mm, total length: 5,080 mm, Gas forklift Hyster S5.50 XMS Gkjdpfx Aajxd E Tbsbsc Drive Gas Year built 2004 Lifting height (mm) 8,000

Condition: used, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,330 mm, total length: 4,040 mm, - Antrieb Treibgas - Bedienung Sitz - Tragfähigkeit/Last kg 3000 - Lastschwerpunkt mm 500 - Lastabstand mm 485 - Achslast mit Last vorn/hinten kg 6230/980 - Achslast ohne Last vorn/hinten kg 1490/2720 - Spurweite vorn mm 1010 - Spurweite hinten mm 965 - Neigung Hubgerüst vor/zurück Grad 6/11 - Sitzhöhe mm 1110 Gedpsxd E Eqjfx Aabekc - Kupplungshöhe mm 335 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4115 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4315 - Wenderadius mm 2430 - Kleinster Drehpunktabstand mm 720 - Fahrgeschwindigkeit mit/ohne Last km/h 18,5/19,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,55 - Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,50 - Steigfähigkeit mit/ohne Last % 23 - Max. Steigfähigkeit mit/ohne Last % 26/20 - Betriebsbremse Hydraulisch - Motorleistung nach ISO 1585 kW 44 - Nenndrehzahl 1/min 2570 - Zylinderzahl / Hubraum cm3 4/2237 - Arbeitsdruck für Anbaugeräte bar 147 - Ölstrom für Anbaugeräte l/min 65-74 - Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 77

Condition: used, Year of construction: 1997, load capacity: 7,000 kg, lifting height: 2,690 mm, total length: 3,850 mm, Gas forklift Gkodpexd E Daefx Aaboc Hyster S 7.00 XL Drive Gas Year built 1997 Lifting height (mm) 2,690 Lifting weight (kg) 7,000

Condition: used, Year of construction: 2005, load capacity: 5,500 kg, lifting height: 6,800 mm, total length: 4,650 mm, Gas forklift Hyster H 5.50 XM Gkodpfxexd E A Ao Aaboc Drive Gas Year built 2005 Lifting height (mm) 6,800 Lifting weight (kg) 5,500

Condition: used, Year of construction: 2003, load capacity: 3,000 kg, lifting height: 8,980 mm, Gas forklift Hyster H 3-00XM Gkedpfx Aasxd Epiobec Drive Gas Year built 2003 Lifting height (mm) 8,980 Lifting weight (kg) 3,000

Condition: used, Year of construction: 1997, load capacity: 5,000 kg, lifting height: 4,090 mm, total length: 5,610 mm, Gas forklift Yale GLP50MF Drive Gas Year built 1997 Gjdjxd Egzepfx Aabjkc Lifting height (mm) 4,090 Lifting weight (kg) 5,000