Used Gbs for sale (266)

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German Kledpfx Aieyaimle Ejt IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Klsdpfox D Ix Tsx Ai Est Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2019, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Kjdpfx Ajx D Hdhoi Eolt Extra Information Robotics and Control Unit Max. payload: 15 kg Working range: 0–4500 mm Digital inputs/outputs: 16 Serial interface: Yes CAN bus: Yes USB interfaces: 2 Flash memory: 8 GB Buffer module: 24 V Expandable to up to 12 axes Welding Technology Power source: Included Welding interface: Integrated Welding and function test: Included Torch cleaning: CMR-8-C torch cleaning device, upright Robotic welding torch: Included Sensors Tactile sensor: Yes Arc sensor: Included Technical Data of Workpiece Positioner Load capacity: 10 kN Nominal torque: max. 1600 Nm Tilting moment: max. 8800 Nm Mass moment of inertia: 900 kgm² Rotation range: +,- 360° Swivel range: 370° Welding Fume Extraction Extraction capacity: 3000 - 4320 m³/h Motor power: 5.5 kW Connection voltage: 3 x 400V/50 Hz Noise level: 65 dB(A) Weight: 640 kg Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) Kjdpfx Asx D E Hbsi Ejlt • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Kedpfxsyy R N As Ai Eelt Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: good (used), functionality: fully functional, Adlink MXC-6321D(G) Fanless Embedded Box PC "Function tested; item originates from the decommissioning of equipment from an automotive supplier." Manufacturer: ADLINK Model: MXC-6321D(G) Fanless Embedded Box PC Processor: Intel Core i7-3610QE (QM77) Expansion slots: 3 × PCI + 1 × PCIe x16 Graphics & Displays: 2 × DisplayPort + 1 × DVI-I (supports 3 independent displays) Interfaces & I/O: 2 × GbE, 4 × USB 3.0, 2 × USB 2.0, 4 × COM, 16-channel isolated DIO Klsdpfsyq R Ulox Ai Est Memory & Storage: 2 × CFast, 2 × 2.5" SATA (RAID 0/1), DDR3 (max. 16 GB) Input voltage: 9–32 V DC Protection & Operating Conditions: Fanless, -20°C to +55 / +60°C (with option) Weight: approx. 4.3 kg

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Kljdsyzbd Tspfx Ai Eet

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) Kjdpfx Aijwga Hwo Eslt - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer Kledpswgaqpsfx Ai Eet - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder Ksdpfswga Etox Ai Eelt - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6AV7240-0HC07-0PA0, Siemens 6AV7240-0HC07-0PA0 Multitouch Display Function tested; item was removed from equipment decommissioned by an automotive supplier SIMATIC IPC 477D, 15" Multitouch display; 4 x USB (rear); no USB (front); Ethernet (10/100/1000), Celeron U827E; 2 x Gbit Ethernet (IE/PN); 4 GB RAM; 1 x RS-232; no PCIE; Windows 7 Ultimate, 64-bit; no removable drive; SSD 240 GB Standard (MLC); Klsdpfx Aiow Ifdps Eet no SIMATIC software; 24V DC industrial power supply.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm Kodpfx Aijvi Enas Eslt - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: used, Year of construction: 2008, Mazatrol Matrix CAM PC workstation with full-featured 5-axis license (incl. PCI card & PC) Description: A complete, ready-to-use PC workstation with the powerful Mazatrol Matrix CAM software is for sale. The license is perpetual and hardware-bound via a PCI card. The system was used on 5-axis machines (Integrex e-1060 V8/II) and includes rare high-end options. The PC has been recently reinstalled and is fully functional. Ideal for companies with an older Mazak machine park looking for an independent programming solution. Details on license & options: The following key options are unlocked and active (see photos): - 40 SIMULTANEOUS 5 AXIS (simultaneous 5-axis machining) - 49 TILTED WORKING PLANE - 55 TOOL CENTER POINT CONTROL Additional basic options such as EIA, Smoothing Control, Spiral, etc. (see photo of the options menu) Scope of delivery: - PC system: Windows 7 Pro x86 (32 Bit), Intel i5-3470 3.2 GHz, 4 GB RAM, AMD Radeon HD7570 GPU. Klsdpfx Asx Sq Nmoi Eot - The fully functional computer with installed operating system (Windows 7 Pro_x86) and pre-installed software. - PCI license card: The physical license hardware installed in the PC. - Original packaging: The original packaging of the software as shown. Documentation: Manual, original CDs/media

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, KERRAJET S7 1400 Name: KERRAJET S7 1400 Producer: KERAJET Product number: 1870019 Klsdpfx Aijyr Hw So Eet Year of production: 2018 Network: Ethernet connection 10/100 BASE-T / 1 Gb System: Piezoelectric DOD Design format: psd,tiff Printhead unit: KERAjet K45 (Xaar Head 2001) No Bars/ Mod./Tray of color 4 bars PH per bar or module or tray 4 colors Total= 24 PH K45: 12, 24, 36, 48 , 60, 72 pl Printing speed (conveyour) Up to 50 m/min Printing width (mm) Bench-350 -decorating width – H_350 and V_60 mm K45: 720x720 at 35 m/min Depending of the resolution and mode: K45 (760 dpi binary mode: 220 ml) Bench system: Conveyor system precision Environment conditions: 30%-80% without condensation Upright resolution: K45: 720 dpi Horizontal resolution: K45: 720 dpi at 35ml/min Vacuum system: NO Ink active system: YES Printing way to define Electrical requirements: 380V 3Phases+Neutral Power: 23 KVA (K700) / 35KVA (K1400) Air pressure: 6 Bar-Max 500L/min Double ink bar: YES Colordirect: YES tile thickness the entry will be ready for 40 mm Environment temperature: 25oC-28oC Max Piece temperature:M 50oC Diamensions and weight: MASTER700 4,65 x 2,069 x 2,27m./ 2850 Kg. The printer is dismantle and wait for the customer in our warehouse

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FTB-4PRO-S1-128G, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, type plate available, Features of the FTB-4 Pro: * Quad-core processor * 4 GB RAM * Windows 10 * Color touchscreen display * 1280 x 800 TFT Kljdpfx Ajydv Idei Eet * Diagonal: 256 mm (10.1 inches) * Internal memory: 128 GB (flash) * Rechargeable Li-ion batteries (optional) * Interfaces: o 1x RJ45 LAN 10/100/1000 Mbit/s o 2x USB 2.0 ports o 1x USB 3.0 port o 1x display port o 1x headphone/microphone jack * Dimensions (H x W x D): 199 mm x 333 mm x 170 mm * Weight (without batteries and modules): 4.6 kg * X-720C-Q1-QUAD-EI-EA – TK-y SM/MM OTDR module * EUI-95 * FTBX-882260-10G 10M to 100G Multi-Service Power Blazer test module * GIGE-Bundle – Option 100 Optical + GigE option * 10GIGE – enables the 10GigE LAN/WAN interface * OTN option pack * OTDR + intelligent Optical Link Mapper base software * iOLM Pro * FP435B-V2-APC – Wireless Analysis Digital Video Inspection Probe, MF Ready * FIPT-400-MF Automated Multi-Fiber Tip UPC for MPO * FID-31 R Fiber Identifier * Including transport case

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Kljdpsxhgfgjfx Ai Est Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: new, Year of construction: 2024, Training system consisting of: 1 welding robot Qirox QRC 350 including control unit, programming handset, 24 V buffering, computer interface (PC side cabinet), 2 GB flash drive Gas nozzle sensor, arc seam tracking, multilayer welding technology, spot editor, Qineo Next 452 with premium control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, Floor rail 20 kN, travel path 6 m, robot is mounted on a C-frame in suspended position. 2 turning device with counter bearing TC 5 kN, load capacity 1000 kg, clamping length 3.0 m, interface control, 4 light barriers, 2 start preselection Kjdpfx Aiocmbnye Eelt Delivery time: 6–8 weeks Warranty: 24 months

Condition: used, mileage: 1,26,255 km, power: 184 kW (250.17 HP), first registration: 03/2015, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,120 mm, fuel: diesel, brakes: engine braking, color: orange, gearing type: mechanical, suspension: steel-air, loading space length: 2,450 mm, loading space width: 2,500 mm, loading space height: 1,180 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, traction control, = Additional Options and Equipment = - Differential lock - PTO (Power Take-Off) - Radio - Rear-view camera - Sun visor - Toolbox = Further Information = Tyre size: 285/70R19.5 Front axle: Steered; Tyre tread left: 75%; Tyre tread right: 75%; Suspension: Leaf springs Rear axle: Twin tyres; Tyre tread left inner: 75%; Tyre tread left outer: 75%; Tyre tread right inner: 75%; Tyre tread right outer: 75%; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 7,250 kg Payload: 8,250 kg Gross vehicle weight: 15,500 kg Emission class: Euro 6b Type number: TGM 15.240 BL / TIPPER / CREW CAB / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the stated texts. Kledpjxbgh Usfx Ai Ejt

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine Kledjyviigjpfx Ai Eot ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: used, mileage: 5,68,816 km, power: 360 kW (489.46 HP), first registration: 09/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, total length: 10,950 mm, total width: 2,550 mm, loading space length: 7,160 mm, loading space width: 2,430 mm, loading space height: 1,060 mm, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, seat heater, traction control, trailer coupling, = Additional options and accessories = - Passenger seat - Remote central locking - Heating - Automatic climate control - Refrigerator - Lift axle - Air suspension - Towing jaw coupling Kedeyvpmfspfx Ai Ejlt - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Blind spot mirror - Toolbox = Notes = Scania R490 8x2/6 Lift and steering axle HMF 5020 K6 4.70 m – 9,270 kg 6.40 m – 6,460 kg 8.30 m – 4,780 kg 10.30 m – 3,700 kg 12.30 m – 3,000 kg 14.40 m – 2,500 kg 16.70 m – 2,150 kg Fly Jib FJ1000 K5 19.60 m – 1,100 kg 21.20 m – 990 kg 22.80 m – 900 kg 24.60 m – 820 kg 26.50 m – 700 kg 28.50 m – 575 kg = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/55R22.5; Steered; Left tread: 50%; Right tread: 50% Front axle 2: Tyre size: 385/55R22.5; Steered; Left tread: 50%; Right tread: 50% Rear axle 1: Tyre size: 315/60R22.5; Twin tyres; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20% Rear axle 2: Tyre size: 375/50R22.5; Steered; Left tread: 75%; Right tread: 75% Weights Unladen weight: 21,275 kg Payload: 15,725 kg Gross vehicle weight: 37,000 kg Functional Crane: HMF Maintenance APK (Main technical inspection): valid until 09/2026 Financial information Price: On request Identification Type number: R490 8X2*6 / HMF 50TM + JIB / NL = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We do our best to provide accurate information, but no rights can be derived from the texts provided.

Condition: used, mileage: 7,43,776 km, power: 279 kW (379.33 HP), first registration: 06/1982, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 10, suspension: steel, total width: 2,500 mm, Year of construction: 1982, Equipment: crane, trailer coupling, = Additional Options and Accessories = - Lifting axle Kledsyvi I Njpfx Ai Ejt - Trailer coupling (drawbar coupling) - PTO - Radio - Sun visor = Remarks = Original Dutch truck. APK / TUV / MOT: 17-02-2027 = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Tire size: 295/80R22.5 Brakes: Drum brakes Suspension: Leaf springs Front axle: Steerable; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Twin tires; Tire tread left inside: 70%; Tire tread left outside: 70%; Tire tread right inside: 70%; Tire tread right outside: 70% Rear axle 2: Twin tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Weights Unladen weight: 15,350 kg Payload: 9,150 kg Gross vehicle weight: 24,500 kg Functional Crane: - Maintenance APK (principal technical inspection): valid until 02.2027 Financial Information Price: On request Identification Type number: R142 V8 6x2 / TOW TRUCK = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We strive to provide correct information, but no rights may be derived from these descriptions.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle Kjdpfexrf Stox Ai Eolt • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Kledpfx Aexcwwpei Eet Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: excellent (used), Year of construction: 1989, Column drilling machine, make GILLARDON, type: GB 45 VE, year 1989, in good condition. Equipped with thread cutting device, coolant system, machine lamp, machine documentation. Spindle taper: MT 4 Spindle speeds: 40–1100 rpm, motor power: 2.2 kW Maximum drilling capacity in steel: 45 mm – 55 mm Maximum drilling stroke: 200 mm 3 feeds: 0.1–0.16–0.25 mm/rev Maximum thread cutting in steel: M42 / M60 Table size: 560 mm x 450 mm Ksdpfex Hr Akox Ai Eelt Required space: 1.3 m x 0.8 m x 2.1 m, weight approx. 740 kg.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 130304, GOM ATOS II Triple Scan - Industrial Blue Light Optical 3D Scanner {CEE ID: 7494} GOM Year: 2013 System includes lenses and calibration plates for the following measurement volume sizes: 320 mm 170 mm Travel roller cases for measuring head, lenses, accessories, and tools. Computer - Dual Xeon processor, 32 GB RAM, RAID hard drives Metal-enclosed reinforced case for computer equipment. Installed software ATOS Professional v8, includes: GOMInspect V1.2.1 Online system manuals. Copy of original software on CD FOBA AROBE studio / camera stand - 12-foot height with 2M horizontal arm, rotating column, and tilting head. Kodpfxsyfgn De Ai Eelt Printed manual, CD with test reports and calibration plate data for each calibration plate Rotary table (manual) Parts set (touch probe)