Used Gear Test for sale (16,123)

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface Iedpfx Asx Ekupebcsap - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Iaedpfxehh H Hie Abcsp Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4,500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Lateral port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg Important safety information for buyers: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see photos) (Technical data and specifications subject to change and errors!) If you have further questions, we are happy to provide information by phone. Iaedpfx Abjyu Rhgscsp

Condition: excellent (used), CTS Type: C-40/350 Ex/l Water-cooled climatic test chamber ATEX Zone 1 The Ex/l designation indicates that this climatic test chamber is suitable for use in potentially explosive environments of Zone 1. This means it is designed for operation in areas where explosive atmospheres may be present. Such equipment is specifically built and tested to ensure safety in these environments. Temperature tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ‡0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0 % rH over time The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical specification: Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Insert shelf: Stainless steel, support area 620 x 600 mm Load per shelf max. 35 kg Total load with max. shelf configuration: 100 kg Control: 32-bit controller LCD control panel Digital display of setpoints and actual values Numeric input of setpoints Clear text error messages RS 232 interface Ethernet interface Free switching channels for custom test specimen control Ijdpfx Aboygui Secoap Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1900 mm × Width 1000 mm × Depth 2300 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Condition: used, Year of construction: 1977, max. wheel diameter 1000 mm gear width 180 mm max. module 7 min. module 0,5 min. ram stroke 16 mm max. ram stroke 180 mm Iaedpfxsyb S H Ds Abcop table hole 160 mm total power requirement 4 kW weight of the machine ca. 5,2 t

Condition: like new (used), Year of construction: 2023, operating hours: 21,000 h, functionality: fully functional, As-new machine / demonstration model. Available for immediate delivery. Technical data provided upon request only. Machine cannot be exported outside the EU. Gleason 300 PS – Technical Specifications General Information Manufacturer: Gleason-Pfauter Maschinenfabrik GmbH, Ludwigsburg Model: 300 PS Machine type: CNC power skiving machine Machine no.: XXXXX System no.: XXXX Year of manufacture: 2023 Commissioned: 01/2024 Application Machining of skiveable profiles on cylindrical workpieces Suitable for internal and external gearings on cylindrical gears Designed for both soft and hard machining Current usage: Machining of hardened workpieces At time of inspection: Internal gear cutting Control / Spindles / Tool Interface Control unit: Siemens Sinumerik 840 D solution line Tool spindle speed (C2): 2,990 rpm Grinding spindle speed / sharpening unit (C3): 12,000 rpm Tool holder: HSK B125 Machining Area Internal workpiece diameter: 40 to 300 mm External workpiece diameter: up to 450 mm Electrical Data Power consumption: approx. 100 kVA Operating voltage: 400 V AC / 50 Hz Dimensions / Weight Dimensions (L×W×H): approx. 3,900 × 5,700 × 5,400 mm Weight: approx. 11,000 kg net Operating Data Machine ON hours: 21,635 h Total cycle time: 10,373 h Equipment / Components Integrated re-sharpening unit with axes +A3, +C3, +X3 Integrated swing gripper Hydraulic unit Chip conveyor Iodpfx Absyuqtisceap Coolant chiller with filter and centrifuge Workpiece carrier conveyor system PS 800 M Year of conveyor system: 2020 Miscellaneous CE marking available

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm Iedpfewzypujx Abcoap control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Hegewald & Peschke Material Testing Machine inspeKt 5 "table blue" + Long-Travel Extensometer MFX 200 For sale is a material testing machine from Hegewald & Peschke (Germany) with integrated long-travel extensometer, type MFX 200. The system is from a laboratory environment and was used for tensile testing and material analysis. ⚠️ Important Notice: The control and regulation electronics (the blue control box) are not included. Therefore, the machine is being sold for spare parts, as a project device, or for retrofit purposes. The manufacturer has confirmed that retrofitting with a new control unit is generally possible, but may be costly. Ideal for: - Universities - Testing laboratories - Mechanical engineering - Spare part recovery - Retrofit projects Description / Function: The Hegewald & Peschke inspeKt series is a high-quality universal material testing machine for performing mechanical tests on materials. Typical tests: - Tensile tests - Compression tests - Material elongation - Fracture elongation - Determination of modulus of elasticity (E-modulus) - Stress-strain analysis The integrated long-travel extensometer MFX 200 measures the length change of the specimen precisely during tensile tests, enabling accurate determination of material properties. Machines in this series are used in: - Material research - Quality control - Plastics and metals testing - Universities and testing institutes Technical Data: Manufacturer: Hegewald & Peschke Meß- und Prüftechnik GmbH Machine: inspeKt 5 – table blue Extensometer: MFX 200 long-travel extensometer Year of manufacture: 2011 Article number: 15-100-031 Serial number: 15031101 Power supply: 230 V / 50–60 Hz Measuring device manufacturer: MF Mess- & Feinwerktechnik Velbert Machine type: Universal material testing machine Dimensions and weight (approx.): Height: approx. 150–170 cm Iajdpfxjyux S Ts Abcep Width: approx. 60 cm Depth: approx. 60 cm Weight: approx. 120–180 kg Important Note: "The table shown in the pictures is not included in the sale." Condition: - Very good laboratory condition visually - Complete mechanical assembly - Control unit / electronics missing - Sale is explicitly as a spare parts donor or for retrofit purposes - Scope of delivery as shown in the photos (Subject to technical changes and errors!) Feel free to contact us by phone with further questions.

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm Iasdpsyud Tpefx Abcop surface area: 1300 x 300 mm

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm Isdpfx Abjyud Tiocjap

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Type: LR87/D132S4/47.58/M1/270 i 47.58 with forced cooling fan -Speed: 30.47 rpm Iaodpfx Abjyug E Iecop -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Design: B3 -Protection rating: IP54 -Quantity: 1 piece available -Price: per piece -Dimensions: 885/320/H300 mm -Weight: 115 kg

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm Iedpfx Asxt D Hxsbcjap -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection rating: IP54 Iaodpfx Aboxl Sbnjcsp -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm -Protection rating: IP55 -Number: 4x geared motors available Iajdpoxt Dnijfx Abcop -Price: per piece -Dimensions: 490/160/H230 mm -Weight: 20.5 kg/pc.

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Iedjw T Rq Sepfx Abcjap

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm Isdpoc U I Emjfx Abcsap -Weight: 20.3 kg

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Isdpfx Ajv T Nqaebceap Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m 2-cut-cycle, shifting, very nice condition. Change gears, arbors. Iodpfx Abevz Edrsceap

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg Iodpfxoyc H N Ns Abceap ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Iajdpfxjyr R Uho Abcop Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: excellent (used), Geared motor, electric motor, electric geared motor -Condition: Geared motor is unused Iasdjuil S Topfx Abcop -Speed: 59 rpm -Power: 22.0 kW -Design: B3 -Protection rating: IP55 -Shaft: Ø 70 x 140 mm -Dimensions: 1100/400/H435 mm -Weight: 336 kg

Condition: used, Year of construction: 1966, functionality: fully functional, Equipment: documentation/manual, Good day, I have a Stanko 5A250 gear planing machine for bevel gears for sale. The machine is in very good technical condition and comes complete with all tool setting devices, etc. The price is 6,000 euros. Technical data: Maximum pitch circle diameter: - ratio 10:1: 500 mm - ratio 2:1: 450 mm - ratio 1:1: 350 mm Module: 1.5 - 8 Maximum tooth cutting length: 90 mm Number of gear teeth: 10 - 150 Iasdpexwp Ngjfx Abcjp Number of tool speeds: 9 Stroke range of double knife movements: 75 - 472 min-1 Time required for machining one tooth: 8 - 123 sec Power: - main drive: 3 kW - hydraulics: 2.2 kW - cooling: 0.15 kW Machine dimensions: - length: 2200 mm - width: 1600 mm - height: 1800 mm Weight: 8,700 kg

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm Iaodpfx Abjv Ehbbjcep and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: excellent (used), Year of construction: 1967, operating hours: 11,240 h, Very little use, Control: conventional, Lubricant: cutting oil, Accessories: Approx. 11 milling tools in double version GT3-5-8 as well as HTD-3-5-8 for various gear ranges Isdpsxnlvdofx Abcjap Face drivers Captis M52 collet chuck Mini tilting container Oil drip tray All gears, holders, and manuals included

Condition: excellent (used), Year of construction: 1984, operating hours: 3,665 h, functionality: limited functionality, Equipment: rotational speed infinitely variable, For sale is high precision micro gear hobbing machine Mikron 102.05, made in Switzerland, year of manufacture around 1984, slightly used, run 3665 moto hours on counter. Have many accessories. Price is 12500 Euro EXW. Ijdpfx Ajymfnlobcoap