Used Gear Test for sale (23,036)

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Crjdpfx Adoxzgn Iodek Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Codpfxoxanrxe Addork Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: good (used), Flat gear motor, geared motor, electric motor, electric geared motor, adjustable geared motor, variable speed geared motor -Brake: dismantled -Manufacturer: Nord, adjustable gear motor -Type SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection class: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg Cjdpfxswl Uxle Addork

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Crsdpsxy Nhhofx Addek Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° Csdpfx Adoxxpdgjdsrk cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Year of construction: 2015, condition: ready for operation (used), A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible. Cjdpfx Adsx Dm D Iodork

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Csdpfoxyadtox Adderk Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Csdpfxsd R Ri Uj Addork Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor with frequency converter -Type: SK 02-71 L/4 TF TR1 i= 6.89 Csdpfxewpgids Addork -Speed: 205 rpm -Engine: Nord type SK 71 L/4 TF TR1 0.37 kW -Frequency converter: Nordac Trio SK 370/1 TR -Shaft: Ø 20 x 40 mm -Number: 3x gear motor available -Price: per piece -Dimensions: 420/160/H285 mm -Weight: 16.2 kg

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW Cjdpoxwl Tzofx Addsrk - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min Crsdpsxylm Hjfx Addek - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm Codjxxl Sgjpfx Adderk gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: ready for operation (used), TOS Gear Hobbing Machine FO16 Maximum wheel diameter: 1,600 mm Gear width: 560 mm Maximum module: 16 Maximum workpiece weight: 7,000 kg Table surface area: 1,350 mm Turning speed range: 16–80 rpm Csdjxwl R Tspfx Addsrk Feeds – axial: 0.05–1.5 mm/min Feeds – radial: 0.25–6 mm/min Feeds – tangential: 0.13–4 mm/min Electrics – voltage/frequency: 380/50 V/Hz Total power requirement: 12 kW Machine weight approx.: 18.5 t Machine dimensions approx.: 4.3 x 2.0 x 3.2 m The machine includes one additional head, change gears, and arbors. Video of the machine under power available.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) Crsdpfx Ajxxuytoddek For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: Crodsvvudkopfx Addok • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm Crjdexwl N Aopfx Addek - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Year of construction: 1986, condition: ready for operation (used), Offered is a Kesel rack milling machine L79/2100 milling head F55 year 1986. Milling travels X/Y/Z: max. 2100mm/250mm/370mm, workpiece width: 280mm, milling head: swivel: +/-30°, stepless speed: 0-210rpm, drive power: 18.5kW, max. module 12, max. cutter diameter: 250mm. Milling feed: 10-350mm/min, rapid return: 5000mm/min, table feed max.: 3000mm/min, Heidenhain TNC151, machine weight: approx. 4700kg. An inspection is possible by arrangement. Codpfxex Auqaj Addsrk

Condition: excellent (used), Diameter: 800mm Module: 10 Cedjxv Sbpepfx Addjrk

Condition: excellent (used), Year of construction: 2006, operating hours: 53,244 h, functionality: fully functional, Technical Data – Gleason Phoenix II 600HC (CNC Hypoid Gear Cutting Machine) Working Area Max. workpiece diameter: Ø 600 mm Max. tooth depth: 24.6 mm Max. gear width: 110 mm Number of teeth: 1–300 Cutterhead size face milling (FM): 18" diameter Cutterhead size hobbing (FH): 210 mm radius Max. cutter spindle speed: 600 min⁻¹ Codpfjxwzu Iox Addjrk Work Spindle Front taper diameter: Ø 203 mm Taper bore diameter: Ø 181 mm Bore depth: 884 mm Max. work spindle speed: 600 min⁻¹ Dimensions and Weight Footprint L × W × H: 4.4 × 3.5 × 3.5 m (incl. peripherals) Machine weight: 26,000 kg Connection Data Total connected load: 139 kVA Main fuse: 200 A Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC

Condition: excellent (used), Vötsch Type: VTS 7060-5 Credexw Uqpopfx Addsk Halogen Bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature change rate cooling: 6 K/min Temperature change rate heating: 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Sound level at 1m distance (free-field measurement): < 69 dB(A) Left side port: 50 mm diameter Right side port: 2 x 125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 16 kW, Rated current: 30 A Circuit breaker, customer-provided: 29 A slow-blow Chamber is water-cooled Refrigerants: R-404A and R 23 Weight approx. 675 kg For your safety as the buyer, please note the following information! The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legal, compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Year of construction: 1997, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Crjdsuuiv Iopfx Addjk Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Year of Manufacture: 1997 TK 08 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Codpfxsxwlmus Addsrk Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Year of construction: 2002, condition: good (used), Vötsch VT 4400/S Temperature Test Chamber Manufacturer: Vötsch Type: Vötsch VT 4400/S Temperature Testing Parameters Temperature Range: -40°C to +120°C Temperature Deviations in Steady State Temporal ± 1 K Spatial ± 2.5 K Distance of Measuring Points from Wall: 150 mm Temperature Rate of Change according to DIN 50011, Part 12: 3 K/min Outer Panel: Galvanized / Plastic-Coated Sheet Steel Inner Panel: Stainless Steel Insulation: 120 mm, Double-Ply Door Hinge: Double-Leaf Floor: Smooth Stainless Steel Floor Load: Min. 1000 N/m² Point Load: 750 N Air Flow: Vertical Temperature Control: Direct Cooling via Refrigeration unit Heating with electric heating elements Refrigeration unit: two-stage, cascade, water-cooled Refrigerant (VK): R 404 A Refrigerant (LT): R 23 Cjdpsuuh Trsfx Addsrk Lighting: 2 x 20 W halogen Control: microprocessor-controlled digital Program Controller Temperature Sensor: Pt 100, DIN IEC 751, Class B Connections Rated Voltage: 400 V ± 10%, 3/N, 50 Hz Rated Power: 27 kW Rated Current: 47 A Protection Class: IP 20 Inlet: R1* Return: R1* Water Pressure (Overpressure) 3 to 6 bar Water Consumption: Max. 3 m³/h Water Inlet Temperature: Max. 18 °C Cleaning/Condensate Drain: R1* External Dimensions: W 3700 x D 1550 x H 2100 mm Chamber: W 3000 x D 1250 x H 1610 mm TK-12 Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 1996, condition: excellent (used), Vötsch VSKZ 04/120/S Walk-In Climatic Test Chamber Manufacturer: Vötsch Type: VSKZ 04/120/S Temp. Range: -40°C to +120°C Line Voltage: 400V Rated Current: 95A Rated Power: 56 kW Refrigerant: R 404 A Year of Manufacture: 1996 External Dimensions: W 2850 x D 4100 x H 3080 mm SO-01 Find more items - new and used - in our shop! International shipping costs on request! Credpfxjuuigyo Addek

Condition: excellent (used), Vötsch VC 0150 Climatic Test Chamber 0°C - +90°C Credpfsuuikfjx Addek Manufacturer: Vötsch Type: VC 0150 Climatic Test Chamber Voltage: 230 V Rated Power: 1.5 kW Voltage: 1540 liters Temperature Range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor Controller List Price: €19,500 KK-09 Find more items - new and used - in our shop! International shipping costs upon request!