Used Gearmotors for sale (60)

Condition: new, power: 30 kW (40.79 HP), type of input current: three-phase, A lot of 22 NORD DRIVESYSTEMS industrial geared motors, manufactured in Germany, is available for sale. These units were originally purchased for an industrial project that was ultimately not implemented. Nwedpjz Aqlgofx Ab Uel All equipment is brand new and unused and is offered at prices significantly below the original list prices. 30 kW – 16 units • Motor: 30 kW, 1485 rpm • Gear unit: SK9052.1AZBHR • Gear ratio: i = 11.88 • Output speed: 125 rpm • Torque: 2292 Nm • List price: €10,165 / unit • Selling price: €5,900 / unit 37 kW – 3 units • Motor: 37 kW, 1485 rpm • Gear unit: SK9072.1AXBR • Gear ratio: i = 12.51 • Output speed: 119 rpm • Torque: 2976 Nm • List price: €13,280 / unit • Selling price: €8,900 / unit 45 kW – 1 unit • Motor: 45 kW, 1485 rpm • Gear unit: SK9072.1AZR • Gear ratio: i = 15.40 • Output speed: 96 rpm • Torque: 4456 Nm • List price: €13,300 / unit • Selling price: €8,950 / unit 75 kW – 2 units • Motor: 75 kW, 1788 rpm • Gear unit: SK9082.1AZR • Gear ratio: i = 17.35 • Output speed: 86 rpm • Torque: 8368 Nm • List price: €23,845 / unit • Selling price: €15,845 / unit Total quantity available: 22 units. The geared motors can be purchased individually, in larger quantities, or as a complete lot. For purchases of multiple units or the entire lot, commercial terms are negotiable.

Year of construction: 2010, condition: used, 0,75kW Hollow output shaft and keyway Helical bevel gear units Gear ratio 43.2 Njdpoh I D Ntsfx Ab Ujwl Mounting position: VB

Year of construction: 2010, condition: good (used), A 20 2 type P(t) [kW] 20C°: 6.0 0,55kW Hollow output shaft and keyway Helical bevel gear units Gear ratio 29.2 Mounting position VB Nwjdpfx Abjh I D I Ds Uol

Condition: used, Year of construction: 1999, Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1400 mm Nwsdpjz Ecyrefx Ab Usl effective width (NUB): 700 mm belt width (GB): 585 mm hight (BH): 740-840 mm Motor Type: SEW Gearmotor Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Gearmotor SEW EURODRIVE RF77 DT80N4/BMG/TF 0.75kW 1380rpm IM M4 Nwodpfx Abeyv Uvre Usl

Condition: excellent (used), For sale: SEW-EURODRIVE R40DT71C2BMG/Z geared motor with a three-phase electric motor and integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good – normal signs of use resulting from operation are visible. This robust geared motor is ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: SEW-EURODRIVE Nedpfx Aeznd Nisb Ujwl Type: R40DT71C2BMG/Z Motor power: 0.37 kW Motor speed: 2700 rpm Output speed: 43 rpm Power supply: 230 V Δ / 400 V Y Frequency: 50 Hz Current: 1.65 / 0.96 A Cos φ: 0.91 Protection class: IP54 Insulation class: F Brake: 400 V AC Brake torque: 2.5 Nm Mounting position: IM B8 Weight: 19.24 kg Gear lubrication: Mineral oil CLP220 Country of manufacture: Germany

Condition: excellent (used), Offering a high-quality SEW EURODRIVE gear motor – brand new, unused (manufactured in 2022). The unit comes from surplus warehouse stock and has not been mounted or commissioned. The equipment is ready for operation, ideal for industrial applications: conveyors, production lines, automation, packaging machinery, and other uses requiring a reliable drive system. ⚙️ Technical Data: Manufacturer: SEW EURODRIVE Model: WA20/T DRN63M6/BE03/TH Power: 0.12 kW Voltage: 220–240 / 380–415 V Frequency: 50 Hz Speed: approx. 870 / 85 rpm Protection class: IP54 Duty: S1 Brake: YES (BE03) Year of manufacture: 2022 📦 Condition & Scope: Condition: NEW (warehouse stock) Never used 100% technically operational Possible minor storage marks Nwodpsy H Ny Tjfx Ab Uol Exactly as shown in the photos

Condition: new, For sale: new gear motor from the renowned German company SEW Eurodrive. The unit is brand new, unused, and comes from warehouse stock. In perfect condition, ready for installation and operation. Technical data Manufacturer: SEW Eurodrive Model: KA67 DT90L4 BMG HF TF ES16 Power: 1.5 kW Motor speed: approx. 1410 rpm Output speed: approx. 29 rpm Gear ratio: i 48.77 Voltage: 220–240V and 380–415V Frequency: 50 Hz Protection class: IP65 Insulation class: F Electromagnetic brake: BMG Condition New, unused Possible minimal traces of storage Fully functional Nodpfjyv R Nuox Ab Uewl Application Conveyors Production lines Industrial machinery Automation SEW Eurodrive gear motors are world-class, guaranteeing reliability and long service life. High-quality product, Made in Germany.

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Nodpfxok Abd No Ab Ujwl Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Nwedpfx Ajk Abfbob Ujl Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Njdpfek Abtpjx Ab Ujwl Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Nedjk Abpaepfx Ab Ujwl Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 2003, Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data - Manufacturer: Kettner GmbH / Krones Group - Machine Type: Bottle packer / crate packer - Model: Blitzpac Junior E 3T - Year of Manufacture: 2003 - Application: Packing of bottles into crates - Format: 20 x 0.5 l crate - Configuration: 4 packing units, each with 4 x 5 positions - Gripper System: Pneumatic matrix gripper for bottle handling - Conveyor System: Modular chain conveyor with stainless steel lane guides - Drive System: SEW-Eurodrive gearmotors Nwedpszbg T Eefx Ab Ujl - Safety: Protective fencing, transparent guarding, safety / sensor equipment - Electrical Supply: 230 / 400 V AC - Current Type: 3-phase - Frequency: 50 Hz - Nominal Current: 13 A - Condition: Used, installed in industrial bottling environment

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Nwodpjzfi A Ajfx Ab Uel Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: used, Year of construction: 2008, Transnorm roller conveyor 3170-900-850 RA2151 Make: Transnorm Roller width (RB): 850 mm Nominal/outer width (NB): 700 mm Nedpfx Asrg Nz Hob Uowl Length: 3170 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,2 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, Nwodscbq Nwepfx Ab Uel circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, Year of construction: 2014, Transnorm roller conveyor 8250-670-655 RA2093 Make: Transnorm Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 8250 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,3 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Nwjdpfx Aen U Dyqob Usl Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), SEW Eurodrive KHF67/R DV132S4/BMG/TH/VR/AV1H Gearmotor Nodpfx Ajrklgdjb Uowl 230/400 V 1430/135 rpm 390 Nm Weight: 90.5 kg Find more new and used gearmotors in our shop! International shipping available upon request!

Condition: used, Year of construction: 2010, Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm Nsdpfxowblk Ro Ab Uowl belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, Transnorm belt conveyor 650-600-500 Nwjdpfxjq Imt Re Ab Usl RA2194 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1998 Condition: good (used) Motor: fully functional conveying length (FL): 650 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Gearmotor Motor power: kW 0.37 230/400 V 50Hz Conveying speed: contact us Weight: 80 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Nwodpfxsznclco Ab Usl Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nodpsk Abn Sjfx Ab Uowl Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2006, Transnorm spiral helix belt curve conveyor left 90°-825-600 IR600 RA2401 Technical data: Type designation: belt curve conveyor TS 1600-105 Helix Nwedpfx Abswdz Hgj Uol frame width (NB): 825 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 260 mm rising) Incline: 260 mm / 90° = 1040 mm / 360° Support feet: optionally available Conveying speed (v m/s): 0.4 Drive: SEW gearmotor Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT106 (wear see pictures) year of construction: 2006 Optionally available: Supports Side guide one and both sides frequenzy converter for steples speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, actuation type: electric, - Operating manual, DTR - Italian production Nedpfxjym Ag Ss Ab Uswl TECHNICAL SPECIFICATIONS: - Track width: 300 mm - Cutting height: 120 mm - Max. blade diameter: 350 mm - Motor power: 30 kW - Table width: 750 mm - Min. workpiece length: 600 mm - Feed speed adjustable via gearmotor - Three rows of anti-kickback pawls - Possibility to mount a board – shoe - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers - Automatic central lubrication - Four upper feed rollers - Extraction port diameter: 200 mm - Machine dimensions (L/W/H): 155 / 165 / 160 cm - Weight: 1800 kg

Condition: excellent (used), For sale: SEW-EURODRIVE R43DT71D4 geared motor with a 0.37 kW three-phase electric motor. The unit is fully functional, tested, and ready for use. The technical condition is very good, and it has normal signs of wear and tear consistent with its use. Its robust construction and high-quality workmanship make this geared motor ideally suited for driving conveyors, feeders, mixers, production machinery, and many other industrial devices. Technical specifications: Manufacturer: SEW-EURODRIVE Model: R43DT71D4 Nwsdpszm Tg Usfx Ab Ujl Power: 0.37 kW Supply voltage: 230/380 V AC Motor: 3-phase Frequency: 50 Hz Motor speed: 1380 rpm Current: 2.25 / 1.3 A Power factor (cos φ): 0.70 Protection rating: IP54 Insulation class: B Weight: 16.45 kg Country of manufacture: Germany