Beam saw CLT

JOEMA 300 x 2600 mm

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Gedpfx Aszh Ti Ejp Dsbu Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Gbedpfsxw N Uvsx Ap Dsu Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Gjdpevi Hw Njfx Ap Dobu Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW Gedpfocht Nyjx Ap Djbu - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height, loaded: 950 -> 1050 mm Rear overhang: 2,300 mm Extendable by: 3,400 mm Wheelbase: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading area: Extendable loading platform with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings, foldable outwards (LC 5,000 daN). 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t Load capacity (50t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). The trailing axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80 kg) Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color, in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories Yellow-red air couplings on the galvanized connection strip at the front. 2 chocks with holders. 2" King Pin A galvanized steel front panel approx. 2200 mm high. (± 105 kg) EN12642-XL Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) at the rear of the trailer. Loading area with approximately 38 mm thick hardwood floor. (± 320 kg) 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform. (± 30 kg) 1 spare wheel holder under the loading platform on the right side, in the direction of travel. Tires 435/50 R 19.5, at the manufacturer's choice. One mudflap at the rear of the trailer. Gbsdpfx Apog Sk Tvo Dou Manual and description on a USB stick. One mounting for a rotating beacon at the rear of the trailer. On the swan neck and at the rear panel, left and right, one mounting each for warning signs including socket. One INOX tool box transversely under the loading platform (1000x400x2500) (± 135 kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90 kg) 4 pairs of WADER container locks. (± 60 kg) 10 pairs of galvanized plug-in rails approx. 100 x 50 mm, 1,000 mm high. (± 220 kg) 3 pairs of pocket rail strips, mounted transversely in the loading area, for plug-in rails 100 x 50 mm. (± 95 kg) S

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm Gbedjrhig Eepfx Ap Deu - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Gedpfx Apjpgkmwo Dobu Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), AZR 600 – 18.5 kW 30 round knives with welded knife holders incl. 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Pusher with hold-down device Vibration-damping machine feet Godpfxei Hb Iao Ap Djbu Automatic star-delta start-up Automatic shutdown when hopper is empty Control cabinet with 5 m cable and PLC-controlled Feed opening: 600 x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW – 400 V – 50 Hz – 3 Ph. Hydraulic motor: 0.75 kW – 400 V – 50 Hz – 3 Ph. Subject to technical changes and errors.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Gbjdpfx Ajxq Rrcep Dou

Year of construction: 2026, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Gbjdpei E Hp Tefx Ap Deu Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C