Used Gears for sale (7,487)

Condition: used, machine/vehicle number: WDB9670211003xxxx, mileage: 2,58,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 13851 Specifications: - 2016 model - Km: Approx. 258,000 Fodpjx S Druofx Ag Reft - Gear: manual - Length inside: Approx. 622 cm - Width inside: Approx. 251 cm - Inside height: Approx. 230 cm - Own weight: 5,180kg - OK tires (see pictures) - 4x2 - 177 hp - Radio/cd - Climate/ac Description: 2016 Mercedes Atego for sale for customer. Km: 258000 HK: 177 Technical approved: no EU-approved until: 31.07.2023 Own weight: 5180 Total Weight: 7490 Payload: 2235 Width: 255 Length: 796 Euro: 6 Model: Atego 818 Skapbil. Lav km Gearbox: Manual

Condition: new, Year of construction: 2026, Vertical Turning center SCR 50 2S Turning Center’s Specifications Nominal Turning Envelope Faceplate Diameter 4.500 mm Machining Diameter Optional 4.700 mm – with the CE Enclosure - 5.300 mm ( without ) Machining Heights 2.100 mm /3500 mm Work Piece Weight 30.000 kg / 50T Nominal Turning Travels X & U - Axis Ram Carriage From -100 mm To 2.600 mm Z and W - Axis Ram 1.250 mm / 1700 mm Faceplate Diameter 4.500 mm/Normal face plate with T-slots Jaw chucks height 200 mm Work Table Speed: 0-50rpm Power Continuous S1 96 kW / 2X75kW Torque Continuous S1 130,000 Nm / 320,000Nm Turning main drive mechanism Gear box reducer ZF and belt transmission Z & W - Axis Ram Turning Ram - Left and Right side Ram Size 250 by 250 mm or bigger Tool holder type KM 63 Tool Storage (ATC) No. of Tool storage 2 Tool Storage, left and right sides Stations qty 12 stations per each tool storage Stations type Turning toolholder ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum tool weight 50 kg Maximum tool size 250 x 150 mm X 700 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Z-Axis Ram Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Axes Rates X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min X, U And Z, W-Axes Rapid Rates 6,000 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -external coolant (turning) -internal Filtration unit: Fodpfx Ajhh Dnxog Rsft -type -accuracy 6 bar at 100 LPM 40 bar at 60 LPM Chips conveyor Conveyor type Hinged (Hardox material) Width The conveyors should have a width of 600 mm CNC Control -type -producer Sienumerik One Siemens / Fanuc oiF

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,275 mm, total height: 1,999 mm, loading space length: 3,002 mm, loading space width: 1,777 mm, loading space height: 1,433 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 35479 Subject to errors and prior sale! SPECIAL EQUIPMENT * Fixed towing device * Integrated, foldable roof rack * 70-liter fuel tank * Cargo protection package: high sidewall trim – vinyl cargo floor covering “Easy Clean” – cargo area lighting (LED), extra bright * LED headlights – LED high beam – LED low beam – LED daytime running lights including integrated front LED indicators – static cornering light – high beam assistant * Heated steering wheel * Sliding doors on right and left * Seat Package 17A: Driver’s seat, 8-way manually adjustable (Ford ergonomic seat) – Fixed double passenger seat with through-loading hatch – Seat heating for driver and outer front passenger – Fold-out tray at passenger seat – Driver’s seat with adjustable inner and outer armrests – 4-way adjustable lumbar support for driver – Passenger side airbag – Side airbags right and left – Head-shoulder airbags front, right and left – “Plus Style” cloth upholstery, seat center section in Black Onyx, remainder in Ebony * Auxiliary heater (fuel-water heater) with remote control, incl. H7 AGM dual battery * Technology Package 5: Electrically adjustable, heated and folding exterior mirrors – Audio system with 13-inch multifunction touchscreen, Ford SYNC 4 including navigation – Blind Spot Assist incl. CTA rear emergency braking assist – Pre-Collision Assist, camera- and radar-based – Drowsiness alert – Lane departure, lane keeping, and lane change assistant – Lane centering pilot – Traffic sign recognition – Wrong-way warning function – Park pilot system front/rear – Adaptive cruise control with Stop & Go function – Intelligent speed limiter with speed limit display – Rear view camera – Sensico steering wheel with leather look FURTHER EQUIPMENT * Two-stage unlocking for passenger and cargo area * Driver’s airbag * Anti-lock braking system with electronic brakeforce distribution * Roof console * Rear double-wing doors (without window), unlockable from 90° to 168° * ESP – Hill start assist – Emergency brake assist – Traction control * Power windows front – with express down/up for driver * Electronic parking brake Ffjdpex St Sksfx Ag Ret * Ford Power Start function * Heated windshield * Grab handles on driver and passenger side * Glove compartment with cover * Interior lighting in front * Automatic climate control * Head restraints front * Cargo compartment lighting (LED) * Plastic steering wheel * Small center console * Emergency call assistant (eCall system) * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5J x 16 steel rims with 215/65 R16 tires * Steering column gear lever * Windshield wipers with rain sensor * Headlights with LED low beam incl. high beam assistant * Rear mud flaps * Front mud flaps * Power steering * Seat belts – front belt tensioners and force limiters – warning system for unfastened driver seatbelt * Start-stop system * Partition (metal) without window * Recirculation heater * 8 lashing points * Immobilizer * Heat-insulating glazing, light tint all around * Central locking with remote control – incl. second key with remote ...and much more. 1st owner. German specification vehicle. Subject to errors and prior sale. 2 years factory warranty from initial registration (extendable on request). We are happy to accept your vehicle as a trade-in. Financing/L

Condition: excellent (used), CATALOG NO. 6623 TECHNICAL DATA - Diameter of processed logs: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Sequence: - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg Ffsdpfxsx Rqzae Ag Rot ADVANTAGES – Manufactured in Germany - Suitable for taper turning of posts – Used rounder, in very good condition Net price: 129,900 PLN Net price: 30,920 EUR (based on 4.2 EUR/PLN rate) (Prices may change according to currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the goods. We only resell items that were previously placed on the market by the manufacturer. We have no business affiliation with the manufacturer.

Condition: new, functionality: fully functional, Year of construction: 2025, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Ffedpfxevn D I Ns Ag Rot Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Working Area Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Centre distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speeds: 0.03 – 50 rpm Ffedpfx Ajwyn Ameg Rot Shaper Spindle Strokes (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder interface: HSK 80 B Tool and Workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control system: SINUMERIK 840 D MACHINE DETAILS Electrical Data Drive power: 7.5 kW Total connected load: 30 kVA Weight and Dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter holder with 4 positions Automatic workpiece changer Linear workpiece conveyor

Condition: used, machine/vehicle number: XLRTSH4300G23xxxx, mileage: 5,17,667 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 17806 Specifications: - 2018 model - About 540,000 km - 6x2 - Lift on 3rd axle - Euro 6 - 530 hp - Suspension: Parabolic in front, air in back - Gear: Automatic - Retarder - Extra light on roof - Compressor horn - Tool cabinet - 2 beds - Refrigerator - Coffee maker - Climate/AC - Radio - Video exists - Ready for delivery Description: DAF XF 530 6x2 truck. 2018 model  2 beds, coffee maker and fridge. Video is available. Ready for delivery. Km: 517667 HK: 530 Technical approved: no EU-approved until: 02.11.2025 Own weight: 9440 Total Weight: 27000 Payload: 17560 Width: 255 Length: 671 Kw: 390 Fodpfsvyfr Tox Ag Rjft Euro: 6 Gearbox: Automatic

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, loading height approx. 990 mm, 4 x lashing eyes in the floor 5 t each, 8 x lashing eyes in the floor 3 t each, reinforced geared support winch with load and fast gear at the front, ?Wide tyres: 385/55 R 19.5, Chassis: Hot-dip galvanized, , Surcharge for:, Aluminium ramps (approx. 3,520 x 400 mm) load capacity 10 t per pair and 2 folding supports at the rear, Price: 1,500 Euro , , , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Fedpjx S N Alsfx Ag Reft

Condition: ready for operation (used), SYKES 5 E MODEL, 2 UNITS AVAILABLE Double helical gear cutting, herringbone gear generator SYKES 1600 mm Special machine for gear power transmissions, oil, petrol & gas industry. In very good working condition. Specifications: Work spindle bore: 8.75" (222 mm) Tailstock to face of work spindle, max: 48" (1219 mm) Standard cutter diameter: 6" P.C.D. Standard cutter bore: 3.5" EXTERNAL GEARS: Blank diameter, max: 63" (1600 mm) Min: 0 Face width, double helical: 0 - 18" (0 - 457 mm) Face width, spur or single helical: 0 - 10" (0 - 254 mm) Fsdjx Rvguepfx Ag Rsft INTERNAL GEARS: Blank diameter, max: 66" (1676 mm) Face width: 0 - 8" (0 - 203 mm) P.C.D., max: 66" - (2 x rim thickness) Pitch range, max: 16 D.P. (1.6 Mod) Min: 1.5 D.P. (17 Mod) Helix angle range: 0 - 45 degrees Dimensions: 3300 mm (L), 3250 mm (W), 2700 mm (H) Weight: 18,940 kg

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers Ffedpfox Rqutjx Ag Ret - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, power: 214 kW (290.96 HP), Year of construction: 2007, operating hours: 21,000 h, Empty weight: 26.100 kg Auction item. Front loader starts, drive all functions works. Ffsdox Ta Dpspfx Ag Rjt One gear no work. Sold as seen in pictures.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Fjdpfx Agjwynhvj Rsft Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: used, machine/vehicle number: WDB9670211L93xxxx, mileage: 4,50,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 13880 Specifications: - 2015 model - Km: Approx. 450,000 - Gear: manual - Tires (see pictures) - Length: 798 cm Fodpfxjx S Drhs Ag Reft - Width: 255 cm - Wheelbase: 422 cm - Net weight: 5,570 kg - Euro 6 - Lifting limb - 4x2 - 177 hp - Radio/cd - Climate/ac Description: 2015 Mercedes Atego for sale for customer. Km: 450000 HK: 177 Technical approved: no EU-approved until: 23.11.2022 Own weight: 5570 Total Weight: 7490 Payload: 1845 Width: 255 Length: 798 Euro: 6 Model: Atego 818 Skapbil Gearbox: Manual

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Ffodpfxox S N Axj Ag Rot

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Ffsdpfx Asx Sw H Seg Rjt Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW Ffsdpsx Rqt Asfx Ag Rst 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table - second-hand planer, in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, power: 93 kW (126.44 HP), Year of construction: 1996, operating hours: 3,529 h, Empty weight: 11.000 kg Auction item. Front loader starts, all functions works. Fodpfx Agox Ta Dcj Reft After working longer gears starts to disappear. Not checked, problem unknown. Sold without a bucket.

Condition: ready for operation (used), Year of construction: 1981, Water dampening good condition no damages on cylinders and gears Ffedpex Srcbefx Ag Rot

Condition: used, mileage: 86,000 km, Year of construction: 2018, Serial number: ZCFA775F80267xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19351 Specifications: - Km: Approx. 86,000 - Gear: Automatic - Euro 6 - Engine brake (replaced) - 4x2 - Side door - Good tires - 15 pallet cabinets - Norka box - Inside length: Approx. 6.05 m - Internal width: 2.47 m - Internal height: 2.34 m - Zepro liftlimb - 1500 kg - 207 Hp - 3 seats - Radio/CD - Climate/AC - Reversing camera - Ready for delivery Description: Iveco 75E Cabinet van from 2018. The truck has only traveled 86,000 km! Ready for delivery. Km: 86000 HK: 207 Technical approved: Yes EU-approved until: 31.10.2026 Own weight: 4850 Total Weight: 7500 Ffjdpfjvg Aazsx Ag Rjt Payload: 2575 Width: 255 Length: 790 Euro: 6 Model: 75E Gearbox: Automatic

Condition: new, empty load weight: 4,650 kg, maximum load weight: 14,350 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, , with hydraulic tailgate, three-way tipper, side walls 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes, each 5 t, set into the floor, 8 x lashing eyes, each 3 t, set into the floor, reinforced geared support winch with load and fast gear at the front, 435/50 R 19.5, , chassis hot-dip galvanized and tipper bridge hot-dip galvanized or painted, , surcharge for:, aluminum ramps (approx. 3,500 long) and 2 folding supports at the rear, price: 1,700 euros, , , , --  Subject to printing errors, errors and changes, sample images --, more details at: !, more details: ! Fsdpfxex S N Are Ag Rsft

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Fodex Sw Ezspfx Ag Reft Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,800 mm, pressing force: 150 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, The eccentric press is a type of mechanical press, powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses, thanks to their rigid frames, provide high stability and process security, especially in applications requiring large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. The monoblock frame, 8-way guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large table dimensions for oversized dies - Die/equipment protection with hydraulic overload safety - Precise guidance via 8-way slide + counterbalance piston - Controlled, user-friendly operation via PLC and touch screen - High operator safety with light curtain protection system Areas of Application - Punching/cutting/forming processes requiring large tables - Serial production with automatic feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-way guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Full automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Motor reverse function • Hydraulic overload safety • Motorized slide adjustment mechanism • Light curtain protection system • Enclosed oil gear unit • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Dies custom-built to specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TON) Fedpfx Agsx N Ru Do Rsft Capacity: 150 Ton Usable area of lower table: 900×1800 mm Usable area of upper table: 900×1800 mm Stroke: 200 mm (fixed) Nominal material thickness: 7 mm Speed (SPM): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric (crank) shafts: 2 Safety system: Hydraulic Electrical components (control panel): Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Ton Note: Please contact us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: used, machine/vehicle number: YV2RT40C0PA31xxxx, mileage: 2,00,000 km, Year of construction: 2023, Please contact ATS Norway for more information Please provide reference number upon request: 17709 Specifications: - Km: 200.000 (will increase) - Gear: I-Save - Retarder - Gear: Full air - Tires (see pictures) - Removable turntable - Painful iciness behind the flywheel - On spot - Tool cabinets around the truck - 6x2 - Compressor horn - Euro 6 - Reversing camera - Extra lights - Sign box - Rotor lamps - Michelin guys - 510 Hp - Wheelbase: 320 cm - Coffee maker - Good with cupboards - Bed - Refrigerator - Gold deal - Video - Ready for delivery Description: Well-equipped Volvo FH500 truck from 2023. The truck is in very good condition and has a gold agreement with Volvo. Ready for delivery. Km: 200000 HK: 509 Technical approved: Yes EU-approved until: 07.07.2026 Own weight: 10080 Total Weight: 28000 Payload: 17920 Fedpjx Azktefx Ag Roft Width: 254,4 Length: 674,8 Kw: 375 Euro: 6 Model: FH500

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Ffedpsxxn Ukefx Ag Rot Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 2,000 mm, pressing force: 200 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front Ffedpfjx N Ruqox Ag Ret • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.