Used Gildemeister Ctx 600 for sale (248)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02260001501, turning length: 600 mm, turning diameter over cross slide: 324 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 635 mm, indexing of C-axis: 0.025 °, TECHNICAL DETAILS Control system: SIEMENS Max. circulation diameter: 680 mm Circulation diameter via X-guide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm Bwodou T Hmmopfx Abzow C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1,500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025° Cross slide (X/Y/Z) Face travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool carrier Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm MACHINE DETAILS hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate (at 6 bar): 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection: 80 A Voltage fluctuation: +6%/-10% Bar loader Manufacturer: Breuning Notes - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 41,000 h, functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe in perfect working order Year 2001 and maintained. Very reliable machine (in 20 years, spindle and clamping pot have been rebuilt once and hydraulic accumulator) HEIDENHAIN Turn Plus IT CNC (conversational and ISO) 12-station VDI 30 turrets Very precise and rigid, suitable for quality 5 (Heidenhain scale on the X axis) Chip conveyor Part catcher arm, diameter 66, length 100 Hydraulic counterspindle (pedal) 400/400V isolation transformer 210mm hydraulic Autoblock chuck with pressure compensator (for clamping thin parts) 66mm spindle bore Pre-equipped bar feeder 41,000 operating hours (see hour meter) All original documentation and invoices (few). Bwjdpfx Aewb Eqdebzew

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW Bodpexcupcsfx Abzsww - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Condition: used, Year of construction: 2007, turning diameter 246 mm Bwsdpfsxuv R Ssx Abzew turning length 445 mm control Fanuc 32 weight of the machine ca. 4250 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Bwsdpfx Abjvmy Icjzjw Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines Bsdpjtpuh Aofx Abzoww - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? Bsdotw U E Uopfx Abzjww - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V5 With driven tools , 2 x C axis + capture. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Manufacture date: 1999 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( all sockets driven ) - max rpm 5000/min. - max length of turning in Z axis: 570 mm - max diameter of turning in X axis: 300 mm - 2 x C axis Bjdpfeu Aardsx Abzjww - driven tools - capture spindle - chuck on main spindle E185 - handle on capture spindle E173 - max. shaft diameter Fi-65 mm - receiver of finished workpiece - tool measuring probe - cooling system - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.7 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _

Condition: ready for operation (used), Year of construction: 2000, operating hours: 12,013 h, functionality: fully functional, turning length: 580 mm, turning diameter: 100 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 36 mm, TECHNICAL DETAILS Bar diameter: 36 mm Chuck diameter: 100 mm Turning length: 580 mm Swing diameter over bed: 145 mm Turning diameter: 100 mm Spindle speed: 2 x 25 - 8,000 rpm Sub-spindle: yes Indexing: 2 x C-axis, 0.001° degree Turret Bedexqpfbopfx Abzoww Number of turrets: 2 x 12-position VDI 25 Powered tool stations: 2 x 12 Tool rotation speed: 31 - 6,300 rpm MACHINE DETAILS Control: Sinumerik 840 D Total power requirement: 50 kVA Machine weight: approx. 6 t Space required: approx. 4.8 x 2.2 x 2 m Operating hours: 21,521 h Spindle hours: 12,013 h EQUIPMENT - SIMAG bar feeder 42.1, year of manufacture 2000

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,334 h, functionality: fully functional, machine/vehicle number: 01510000031, spindle bore: 70 mm, turning length: 1,350 mm, turning diameter: 500 mm, center width: 1,350 mm, spindle speed (max.): 3,000 rpm, No reserve price - guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified period between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning length: 1,350 mm Swing diameter: 500 mm Swing diameter over cross slide: 290 mm Swing diameter over bed: 500 mm Chuck diameter: 250 mm Maximum spindle speed: 3,000 rpm Cross slide travel: 260 mm Distance between centers: 1,350 mm Spindle nose: 8 Spindle bore: 70 mm Bwsdpfoxm Slcjx Abzew MACHINE DETAILS Control: HEIDENHAIN Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,800 x 1,700 mm Total weight: 4,000 kg Electrical Data Type of input current: Three-phase Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A Connection load: 14 kVA Operating hours: 60,334 h

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 1850 kg Control Unit Brand FANUC Model 18i-T Main Drive Spindle speed range 8000 Number of axis 6 Movement X-Axis Movement 100 mm Z-Axis Movement 270 mm Additional Equipment Interface: RS232 / PCMCIA Rotating Guide Bush Bsdpfx Aoxpyqrsbzsww Parts Catcher Coolant Tank (plus additional coolant tank) Hydraulic Bar-Push Brand/Type: FNB Turbo 3-26 Additional Turning Tool Holders This 6-axis Gildemeister GLD 25 swiss type turning machine was manufactured in 2003. It features a GE Fanuc Series 18i-T control, a maximum rpm of 8000, and can handle bar diameters up to 25mm. Equipped with a rotating guide bush, parts catcher, and additional coolant tank, it offers robust capabilities for precision turning. If you are looking to get high-quality turning capabilities consider the Gildemeister GLD 25 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg Bodpfx Ash Ecnasbzsww The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. Bwedpfxoub Amlo Abzsw --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Bedpsxtr Iwofx Abzjww Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2001, functionality: fully functional, GILDEMEISTER - NEF 320 Listing Details Stock number: 1039-9316 Machine Type: Cycle-Controlled Lathe Manufacturer: GILDEMEISTER Model: NEF 320 Year of Manufacture: 2001 CNC Control: Manual Plus 3110 Heidenhain Location: D-59302 Oelde, Germany Country of Origin: Germany Availability: Immediate Freight Terms: Ex works location Additional Information: Cycle-controlled lathe GILDEMEISTER - NEF 320 - Operating hours (power on): 21,529h WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: max. 320 mm Turning length: max. 740 mm CNC Control: Manual Plus 3110 Heidenhain Swing over bed: 320 mm Swing over cross slide: 150 mm Turning length: 740 mm Cross slide travel: 185 mm Distance between centers: 750 mm Main Spindle: Spindle speed range: 10 - 4,000 rpm Main spindle drive power: 11 kW Max. torque: 410 Nm Spindle nose: No. 6 DIN 55027 Front bearing spindle diameter: 85 mm Spindle bore: 50.8 mm Max. chuck diameter: 200 mm Chuck diameter: 200 mm Tool holder: Type: MultiFix - B Tailstock: Quill diameter: 70 mm Quill taper: MK 5 Quill stroke: 120 mm Feeds: Rapid traverse x/z: 8 / 10 m/min Feed force x/z: 3 / 6 kN Total power requirement: 14 kVA Machine weight approx.: 2.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Bwodpfx Absxtpcfszsw Accessories Documentation Three-jaw chuck 200 mm Tailstock Tool holder MultiFix B

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm Bwjdpsuw Izvofx Abzjw ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Condition: used, Year of construction: 1988, tail stock ja ja Bedpfx Absu Su I Eszoww condition nicht geprüft weight of the machine ca. 3,8 t

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm Bwodeiv Irlopfx Abzew - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, I am offering for sale a reputable brand CNC lathe: GILDEMEISTER MF Sprint 65 with driven tools, 2 x turrets + sub-spindle. _ Type: CNC Lathe Automatic Manufacturer: GILDEMEISTER Model: MF Sprint 65 Control: SIEMENS 840C Country of manufacture: Germany Year of manufacture: 1998 _ Machine specifications: - Turret: 8 tool stations with VDI 30 holders (every second station is driven) - Turret: 8 tool stations with VDI 30 holders (every second station is driven) - Max revolutions: 5,000 rpm - SLIDE 1 - Cross / longitudinal travel: 155mm / 280mm - SLIDE 2 - Cross / longitudinal travel: 82mm / 120mm - C axis - Driven tools - Sub-spindle - Main spindle chuck: HAINBUCH BZI65 - Sub-spindle chuck: Dia. 125mm - Max bar diameter: Dia. 65mm - Part catcher - High-pressure cooling system - Chip conveyor - Bar feeder magazine: FMB Turbo 10-65XT - Spindle drive power: 21 kW - Documentation (DTR) - Machine weight: 6 tonnes Bsdpfx Absxtniwszeww _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own stationary and mobile service teams - Over 700 DMG machines sold - Possibility of commissioning the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a comprehensive technical inspection and are 100% ready for work - Machine purchase possible via installment plan and leasing options _ www_ppmsc_pl _

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - Powerline Turning diam. : 640 mm Turning length : 1185 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Barcapacity:65 m Bwodexrw Uyepfx Abzjw Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Movement in Z:1.150 mm Rapid travers in Z:40 m/min Toolcarrier I (X/Y/Z/B): Technology:Millingspindle Speed:12.000 rpm Power (max.):22 kW Torque (max.):100 Nm Taper:HSK-A63 Movement in X/Y/Z:550/180/1.185 mm Rapid traverse in X/Y/Z:40/24/70 m/min B-Axis:240° Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VD40 Tooldrive:4.000 rpm, 11,7 kW, 28 Nm Movement in X/Z:180/1.050 mm Rapid traverse in X/Z:24/40 m/min In general: Technology:Shelfmagazin with Double-gripper Toolstations:80 Toollength (max.):200 mm Tool-ø (max.):80 mm Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter, Temperature control and high-pressure, 80 bar Workpiecemeasurement:Touchprobe, Marposs WRP 45 Toolbreakagecontrol:Mechanical Rawmaterial feed:Barloader, Breuning-Irtco ILS-RBK 10016 Finishedpart removal:Pick-up device at Turret andParts conveyor belt Oilmistseperator:Electrostatic Extraction, LTA AC 3001 Toolholder:Misc. used static and driven toolholder Further Accessory:Chiller, Rinsing pistol

Condition: used, Year of construction: 2006, centre height 165 mm centre distance 750 mm turning diameter over bed 320 mm turning diameter over slide 150 mm turning length 750 mm spindle taper KK 6 DIN 55027 control MANUALplus 4110 HEIDENHAIN bed width 360 mm spindle bore 50,8 mm turning speed range 10 - 4000 U/min rapid travel - longitudinal/face 10 / 8 m/min 3-jaw-chuck diameter 200 mm SCHUNK quick change toolholder MULTIFIX Typ B drive capacity - spindle motor 9 kW taper in tailstock-quill MK 5 Bodpfx Ajxqrdgjbzjww dia. of quill 70 mm quill stroke 120 mm voltage 400 V total power requirement 14 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 2,45 x 2,10 x 1,85 m Machine from training department. Only 4.488 Power-On hours! Excellent condition! - Serial No.: Power On: 4.488 h - CNC-Control MANUALplus 4110 - 3-Jaw-Chuck (Wedge type) SCHUNK ROTA-Plus 200-52 - Quick change tool holders MULTIFIX Size B - Coolant equipment - 2-step spindel gear

Condition: used, Year of construction: 2001, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m Bsdpfsw Syc Iox Abzoww

Condition: used, Spare Parts Donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A Bsdpfedzqm Rox Abzeww CNC control: Eltropilot EPL 2 Machine No. 4.5733 Year of construction: 1989 Machine not operational - electrical issues Standard turning diameter: 185 mm Maximum swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Longitudinal slide travel (Z-axis): 450 mm Spindle bore diameter: 52.7 mm Draw tube spindle clearance: Ø 42 mm Feed rate X and Z axes: max. 3000 mm/min Spindle speed: 40-6300 rpm, infinitely variable Spindle drive motor power: 22 kW Electrical connection: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw power chuck FORKARDT Ø 200 mm - 12-station tool turret, VDI 40, every second station driven - 6 driven tool stations - Chip conveyor with integrated coolant unit - Separate electrical cabinet - 10 tool holders VDI 40 Footprint of complete machine (L x W x H): 5000 x 2500 x 2100 mm Total weight: approx. 5.7 t Good condition Transport dimensions: Footprint of base machine (L x W x H): 3000 x 2300 x 1900 mm Weight of base machine: approx. 4.8 t Footprint of chip conveyor (L x W x H): 4300 x 1200 x 1650 mm Weight of chip conveyor: approx. 500 kg Footprint of control cabinet (L x W x H): 2500 x 550 x 2000 mm Weight of control cabinet: approx. 450 kg Main drive motor missing Individual components available on request

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm Bedpfx Absw Syd Sszoww weight of the machine ca. 3,6 t

Condition: used, turning diameter . mm Bedpfx Aboqn A Rnezeww turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW