Used Gildemeister Gdm 90 for sale (241)

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg Iaodoh Ecnaspfx Adwel The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Isdpfx Asuyx Hzodwoal

Condition: used, Spare Parts Donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A CNC control: Eltropilot EPL 2 Machine No. 4.5733 Year of construction: 1989 Machine not operational - electrical issues Standard turning diameter: 185 mm Maximum swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Longitudinal slide travel (Z-axis): 450 mm Spindle bore diameter: 52.7 mm Draw tube spindle clearance: Ø 42 mm Feed rate X and Z axes: max. 3000 mm/min Spindle speed: 40-6300 rpm, infinitely variable Spindle drive motor power: 22 kW Electrical connection: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw power chuck FORKARDT Ø 200 mm - 12-station tool turret, VDI 40, every second station driven - 6 driven tool stations - Chip conveyor with integrated coolant unit - Separate electrical cabinet - 10 tool holders VDI 40 Footprint of complete machine (L x W x H): 5000 x 2500 x 2100 mm Total weight: approx. 5.7 t Good condition Transport dimensions: Footprint of base machine (L x W x H): 3000 x 2300 x 1900 mm Weight of base machine: approx. 4.8 t Footprint of chip conveyor (L x W x H): 4300 x 1200 x 1650 mm Weight of chip conveyor: approx. 500 kg Footprint of control cabinet (L x W x H): 2500 x 550 x 2000 mm Weight of control cabinet: approx. 450 kg Main drive motor missing Individual components available on request Ijdpsdzqm Rsfx Adwjal

Condition: ready for operation (used), Gildemeister VAP4 / VAP 4 AES 1 / 0.881.051-2 card SN 5899090, used, normal signs of use, 100% functional, scope of delivery as per photos Ijdpfjtztfgox Adwsal

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Electrical Supply Rated voltage: 400 V Phases: 3~ Iaedpfex Uz Edex Adwjl Frequency: 50 Hz Performance Data Power: 24 kVA Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed 560 mm Swing diameter over cross slide 250 mm Iaodpfxovn Rlze Adwel Spindle bore 65.3 mm Power Max. 15 KW Speeds 11.2 - 2,240 rpm Centre width 1,000 mm Quill diameter 80 mm Quill mount MK 5 Incl. chip conveyor Incl. complete documentation

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder Isdpjtzyx Tjfx Adweal - Pick-up spindle workpiece pusher

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm Iasdpfx Asiv Irljdwol dead weight: 65 kg good condition

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Iaedjx N A Dwopfx Adwol Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Iodpfoxzt Dcox Adwjal Y-axis, C-axis Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Additional equipment • Mechanical and electrical preparation for fire extinguishing system • Cooling system with 600l capacity and 50µm filter • Pump with options of 8 or 20 bar Iasdpfx Ajx D H I Tjdwjl • IEMCA Boss 332E bar loader for bar length up to 3m • Bristol B270/E oil mist separator • Moving headstock (80mm) with tools on slides plus tool breakage detection Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Iodoxtr Iwjpfx Adwoal Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2001, chucking diameter 250 mm Iodpfx Adow Syc Ijwoal greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m

Condition: good (used), Year of construction: 1985, Ref. -No.: 10595 Manufacturer: GILDEMEISTER MAX MüLLER Type: MD 6S Iedpfx Adjx Sw Najweal Year of construction: 1985 Type of control: CNC Control: EPL 4 Storage location: Halberstadt Country of origin: Germany Tool holder type: 2 x VDI 50 Centre Distance: 1765 mm Spindle passage: 101 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Lathe chuck diameter, max.: 400 mm Power Capacity: 50 kW Weight Of The Machine Ca.: 16 t Turning Speed Range: 10 - 2800 rpm Quill holder: MK 5 Further information: - Equipment - Powered tools - Tailstock - Automatic quill stroke - Chip conveyor - Automatic sliding safety doors - Hydraulic steady rest - 2 turrets

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 3 Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Iodpsx Nvr Usfx Adweal Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Iaodpfxjxn Apbo Adwel Coolant system Chip rinse gun 6 machine feet Operating manual

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Power max.:26 kW C-axis:0.001° Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Isdexzmp Ejpfx Adweal Tool carrier II (X/Z): Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders

Condition: used, Year of construction: 1988, tail stock ja Iaodpsu Su I Esfx Adwsl ja condition nicht geprüft weight of the machine ca. 3,8 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 2,000 mm, rotational speed (min.): 4,500 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 350 mm, Year of manufacture: 2001 Iajdpex Nvqdofx Adwol Chuck diameter: 12" Number of axes: 2 Length: 1000 mm Neck diameter: 350 mm Spindle speed (rpm): 3500 Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek.

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Operating manual Iaodpjxn Ar Asfx Adwjl The machine is in very good condition!

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm weight of the machine ca. 3,6 t Isdpfjw Syd Sex Adwsal Handwheel defective

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 2 Length: 1000 mm Swing Over Bed: 350 mm Iasdpsx Nvpasfx Adwsl Spindle Speed (RPM): 3500 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Iaodpfx Aouda Tnedwsl Chip tray Operating instructions

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW Iasdjqn A Rnepfx Adwsl generator - rated current 95,00 A connected load 65,00 kW

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T Iasdpfx Adsqn A Rgewsl 2 toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade