Used Glass Cutting Table for sale (28,554)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Hsdpfsr Ak Exjx Ag Nei Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. Hjdpfxov Rr E Ij Ag Nsi With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass

Condition: new, functionality: fully functional, laser type: fiber laser, laser source manufacturer: Maxphotonics, total length: 5,150 mm, total width: 2,870 mm, total height: 2,450 mm, Equipment: CE marking, centralized greasing system, cooling unit, Why continue struggling with the cut quality of fine plasma systems? Why waste valuable space in your workshop with a shuttle table? Why spend thousands of euros every year on expensive plasma consumables? In addition to the obvious advantages of modern fiber laser technology with regard to precision and virtually rework-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is far easier to operate than plasma cutting systems. Best of all, at Schmidt & partners Cutting, we fully support your machine throughout its entire service life from our two service locations. As your reliable partner in the cutting industry, we offer expert consulting, installation, training, maintenance, and repairs. Our expertise and know-how are available to support you, including with cutting parameters for special materials. We are also happy to assist you in the implementation of this technology into your business—ensuring laser safety and compliance. kaitec FIBER Eco 1530 Cutting area: 1,500 x 3,000 mm Max. sheet thickness: 25 mm (depending on laser source power) Laser systems: 2kW / 3kW / 4kW / 6kW Maxphotonics series (In cooperation with AK Industry GmbH, certified service partner in Germany) CE certified, risk assessed Hedpfx Ajx Ngp Dog Noi Machine price depending on configuration, tailored to your requirements from €96,850 (plus transport, installation & training) Don’t have a suitable filtration system yet? We are happy to provide the appropriate extraction and filter unit, customized to your needs. We look forward to hearing from you!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – CUTTING TECHNOLOGY BY PROFESSIONALS FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut optimally. Automatic initial height detection, automatic arc control, and intelligent collision protection ensure maximum quality and the highest possible repeatability. The automated program sequence and the long service life of the consumables help to actively and significantly minimize cutting costs. The oxy-fuel process also impresses with its ease of use and functionality. Thanks to the automatic piercing function, preheating times and the activation of cutting oxygen are controlled by CNC. This allows sheets up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane and is equipped with automatic height control. Hodpfxox Ngn Tj Ag Nei kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on milled surfaces. The sturdy cutting grate features offset, serrated support blades, providing optimal sheet metal support and reducing slag formation on the workpiece as well as excessive wear of the blades, which saves real money on rework and maintenance. The depth of the trough is precisely designed to accommodate slag and ensure effective cooling; it is easy to clean and captures the dust produced during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Plasma material thickness: 1–25 mm Oxy-fuel material thickness: 10–80 mm Price: Machine price depending on configuration, tailored to your requirements from €38,900 plus plasma unit, transport & installation We look forward to your inquiry!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 50 mm, kaitec Easycut – PLASMA & OXYFUEL CUTTING PERFECTION FOR METAL & STEEL CONSTRUCTION The kaitec Easycut is a highly flexible CNC gantry cutting system, specifically developed for cutting material thicknesses between 1 and 50 mm. Thanks to its space-saving flatbed design, it is ideally suited for a wide range of applications. The double-sided driven machine gantry ensures exceptional cutting results through high rigidity and precise mechanical guidance. Available in three cutting area sizes, the kaitec Easycut can be tailored exactly to your sheet metal processing needs. It impresses with its great flexibility in the compact cutting machine segment. kaitec Easycut – WATER TABLE SYSTEM The robust water table forms the basis of the flatbed design. The precisely aligned longitudinal guides and the sturdy, serrated cutting grate reduce slag, protect the slats, and minimize maintenance costs. Optimized tank depth enables efficient slag collection and cooling. In addition, the system is easy to clean and reliably captures cutting dust. kaitec Easycut – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With its highly efficient plasma process, material thicknesses up to 25 mm can be cut precisely and cost-effectively. Automatic initial height sensing, arc voltage control, and intelligent collision protection ensure maximum quality and repeatability. The automated cutting process and long consumable life notably reduce operating costs. The oxyfuel process also impresses with straightforward handling and reliable functionality. The CNC-controlled piercing function optimizes preheating times and automatically regulates the oxygen supply, enabling sheets up to 50 mm to be cut efficiently. The oxyfuel system is available for acetylene or propane gas and features automatic height control for consistently precise cutting results. Cutting Area: 1,500 x 3,000 mm Material Thickness Plasma: 1-25 mm Hedpox Ngnyjfx Ag Nji Material Thickness Oxyfuel: 10-50 mm Price: Machine price depending on equipment, tailored to your requirements from €29,900 plus plasma unit, transport & installation We look forward to hearing from you!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec 1530 – Your Ultimate Solution for Precision Cutting! Are you looking for the best entry-level machine on the market? Your search ends here! With the kaitec 1530 plasma cutting system, you gain access to unrivaled cutting performance and unbeatable flexibility. No more reliance on external cutting services or dealing with lengthy lead times from suppliers. The kaitec 1530 plasma cutter is designed to give you full control over your cutting requirements. Its intelligent material utilization will save you money and reduce unnecessary transport costs. Say goodbye to long waits for your orders – you control the delivery schedule and work at your own pace. Our kaitec 1530 cutting system has taken the industry by storm—and for good reason. It combines performance, flexibility, and cost efficiency like no other. Eliminate dependency and delays—choose the kaitec 1530 plasma cutting system to boost your productivity, save costs, and accelerate your workflow. Welcome to the future of cutting! kaitec 1530 – Precision and Versatility for the Future of Cutting! Our innovative machine combines the power of plasma and oxy-fuel technologies, enabling you to cut materials with impressive thicknesses of up to 50 mm. Precision cutting has never been so easy. Thanks to our integrated cutting database for mild steel, aluminum, and stainless steel, you always have total control with optimal settings for every material. With 50 macros for creating cutting programs directly on the CNC controller, your possibilities are virtually limitless. The kaitec 1530 plasma cutter not only ensures efficient workflows but also cost optimization. Our intelligent remnant sheet management and cutting cost module help you reduce material waste and lower your production costs. Experience the future of cutting with kaitec 1530 and increase your productivity, efficiency, and profitability. Welcome to a new era in cutting! Cutting Area: 1,000 x 2,000 mm 1,500 x 3,000 mm Material Thickness (Plasma): 1–25 mm Material Thickness (Oxy-fuel): 10–60 mm Price: Machine price depending on configuration, tailored to your requirements: from €8,900 (machine only, without table, etc.) from €15,900 (complete set) plus plasma source, transport & installation Hjdpox Ngl Ssfx Ag Nsi We look forward to your inquiry!

Condition: used, Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Volume: 300 liters Hedep R Nlnspfx Ag Nei

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Glass GbmH mixer marinator for delicate food products, with manual tilting and multi-functional control display. Fitted on mobile frame. Suitable for semi-solid, powdery and liquid products. Model / Type - VSM 150. Serial number - 4174 Date of manufacture - 2019. Capacity - 150 litres. Hjdpfxovuhiqs Ag Nei Electric supply - 400 V / 50 hz / 3 phase. Power - 16 Amps.

Condition: excellent (used), functionality: fully functional, fuel type: electric, overall weight: 1,000 kg, operation weight: 575 kg, lifting height: 3,600 mm, Lifter, manipulator for glass, windows, plates Smartlift lifting capacity 575kg remote control - electric drive - side shift - control from a remote control on a cable - pressure indicators - 24V power supply (two batteries) - rough terrain trolley - max lifting capacity 575kg - range in the photo - one electric extension - fully working / video on whatsapp - electric rotation The machine is located in Poland - 33350. On-site inspection is available by appointment. Our company is located 120 km from Krakow Airport (KRK). transport possible External length 1,880 mm External width 890 mm Dependent weight 1,025 / 1,300 kg Max. lifting capacity 575 kg Max. load at maximum extension 275 kg Minimum extension (center of drive wheel to suction plates) 700 mm Max. extension (center of drive wheel to suction plates) 1,800 mm Max. height to center of lifting bracket 3,600 mm Lateral offset 100 mm Fine lifting function in the tower 200 mm Swivel 180 degrees Hsdpfxoxndqto Ag Noi Hydraulic rotation 180 degrees Suction plates 4 x Ø 350 mm Batteries

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Hjdpjvv R H Usfx Ag Nsi Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Hsdpfx Aep H Swdog Nei Gross power: 15KW Total weight: About 4000KG

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm Hodpovv R Hzofx Ag Noi

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste Hjdowypp Iepfx Ag Noi - Sheet deceleration device - Tab insertion device

Condition: excellent (used), The line for gnocchi includes: Hsdpfxofwmt Ue Ag Nei - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters

Condition: used, Outfeed table before resaw IDL000793 Hedpfx Aoul Rgvsg Nsi

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Hodstddw Aspfx Ag Noi - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Hsdpfx Aeu Smq Seg Nei - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Hodpsu Ivauefx Ag Nei Dimensions 260 x 160 cm Height 215 cm.

Year of construction: 2008, condition: excellent (used), GLASS VAS VSM 1000 ID.NO. 2416 GLASS VAS VSM 1000 liter chopping / processing machine year mod 2008. Suitable for making mayonnaise, hummus, sauces, pastes, dairy products and much more! Available for immediate delivery! Hedpoixz Tnefx Ag Noi

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Hedpfxeu Nhiqo Ag Nei Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: new, Year of construction: 2026, For sale: versatile Eckert Opal Waterjet cutting system, ideal for processing stone (natural stone, marble, granite), but also suitable for a variety of other materials. Waterjet cutting is performed without thermal impact, enabling precise and clean cutting edges. Perfect for complex contours, inlays, cutouts, or demanding shapes in stone. 🛠 Technical Specifications & Equipment (Manufacturer Data) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Cuttable material thickness (waterjet 2D): 0.5 – 250 mm Cuttable material thickness (waterjet 3D, optional): 0.5 – 150 mm Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Design: Gantry construction with closed steel profiles for maximum stability and durability. The cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitive to operate for efficient workflow. Cutting process: Pure water or abrasive waterjet cutting; optional 5-axis cutting head available for 3D/bevel cutting. Optional additional equipment (if available / to be specified): [e.g. “Pro-X 3D Cutting Head”, “Abrasive Cutting”, “Multiple Cutting Heads (e.g. 2-Head / 4-Head)”, “CAD/CAM Software”, “Water Softening System”, “Scraper Chain Conveyor”, “Wastewater / Filtration Unit”, etc.] 🎯 Ideal for: Stone and natural stone processing businesses, marble or natural stone design workshops. Companies requiring precise, heat-free cuts for contours, inlays, cutouts, or shaped stones. Hodpfx Asx A Tr Nsg Noi Operations that value clean cutting quality, minimal reworking, and high flexibility in terms of materials. Projects with complex shapes, bevel cuts, or 3D processing – especially with the optional 3D cutting head.

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Hedpfx Agefz A I Ee Nji Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential.

Condition: new, Diamond Cube – Fiber Laser Cutting System | Compact | Precise | Efficient The Diamond Cube is a space-saving and powerful fiber laser cutting system designed for professional metal processing. It is ideal for companies seeking to combine high cutting quality and cost-effective production in a compact machine. Technical Highlights: – Working area: 3000 × 1500 mm (standard size) – Laser power: available in various levels depending on configuration – Material processing: steel, stainless steel, aluminum, and more – Maximum material thickness: up to approx. 40 mm (depending on power) – Positioning speed: up to 120 m/min – Precision servo drive & robust gantry construction – Front loading with pull-out table for fast part change; load capacity up to 1.4 t – Modern CNC control system with integrated CAD/CAM software – Low maintenance requirements thanks to fiber laser technology Advantages for your production: – High cutting quality and repeat accuracy – Compact design – minimal footprint Hedpsfz Di Ajfx Ag Nji – Fast changeover times and user-friendly operation – Excellent cost-efficiency and low operating costs – Perfect for small to medium batch production and contract manufacturing The Diamond Cube is the ideal solution for companies in steel construction, mechanical engineering, and metalworking looking to modernize their production and rely on a reliable, precise, and energy-efficient laser cutting system.

Condition: new, functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, laser type: fiber laser, Equipment: CE marking, dust extraction, emergency stop, Diamond Tube Laser T9350 – Precision and Flexibility for Tube and Profile Processing The Diamond Tube Laser T9350 from Eckert Cutting is a state-of-the-art laser tube cutting system specifically designed for processing tubes and profiles. Its robust gantry construction and angled rack-and-pinion drive provide exceptional rigidity, stability, and speed. Hjdpsf Ak Swsfx Ag Nji Thanks to an intelligent, pneumatically controlled clamping system and floating tube support, the machine securely holds tubes and profiles of varying shapes and lengths—ensuring consistently high cutting quality even with long parts. The system enables the processing of a wide range of tube and profile geometries, including round, square, rectangular, oval, elliptical, special profiles, channels (C), I- and H-beams, and many other shapes. Complex angled and bevel cuts of up to 45° are also possible (with optional 4-, 5-, or 6-axis heads). Additional highlights include: 360° processing with CNC-controlled self-centering, high cutting precision with finely defined cut edges, stable production even with long tubes, as well as options for series production and automation through optional loading systems. With its versatility and reliability, the Diamond Tube Laser T9350 is ideally suited for companies in metalworking, steel construction, mechanical engineering, and fabrication—anywhere precise tube and profile processing with high efficiency and repeatability is required.

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Hodpetpgxijfx Ag Nei Height: 80 cm (height is adjustable) Diamter: 120 cm