Used Glass Crushers for sale (4,227)

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: 80796, Machine is in a perfect condition, fully operational, needs to be dismantled on site in Vilnius, Lithuania. Seller offers dismantling, loading on the truck as well as delivery. Gjdpsvddplofx Aabjkc

Condition: new, functionality: fully functional, overall weight: 51,000 kg, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Jaw Crushers generally crushes 60 to 600 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK-130 • Type: Primary Jaw Crusher • Inlet Dimensions: 1300 X 1100 mm Godjwx Imijpfx Aabskc • Jaw Opening: 120-280 mm • Max Feeding: 1000 mm • Capacity: 320-600 Ton Per Hour • Motor: Heavy duty GAMAK, 200 Kw Bearings: Heavy duty SKF-FAG • Weight: 51000 kg • Including motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 1994, Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible. Gkjdpfx Asxg Ri Heaboc

Condition: excellent (used), Year of construction: 2010, Hotmelt, heated edge banding machine. Heated tank Heated hose Heated gun Tank capacity: 45 liters Gkjdoxbnkdspfx Aabjc Excellent condition, as shown! Can be inspected and tested at our premises, available for immediate pickup!

Condition: used, loading : 75 to 80 % with 2 arms all stainless steel mobile 1,5 kW Gkjdpfx Asw U Tq Roabjc tiltable drum with working and waiting time dimensions (l x w x h) : ± 2.000 x 1.300 x 2.200 mm

Condition: new, Year of construction: 2025, If you are looking for a cone crusher for sale, you can call us 24/7. CONSTMACH's innovative cone crushers are the perfect solution for those looking for superior performance and durability. Our wide range of models offers options to suit every need. While our HP100 model draws attention with its compact and powerful structure, our HP800 model provides superior efficiency even in the most challenging conditions. Each of our cone crusher models is manufactured to the highest quality standards. The total weight of the HP100 model is 5,400 kg, and the weight of the boiler, boiler liner, cover and bunker is 1,320 kg. This model, whose recommended maximum power varies between 90 Kw and 125 HP, offers impressive performance with a countersunk shaft speed of 750-1200 rpm. HP200 and HP300 models are designed to meet increasing power needs and have a recommended maximum power of 132 Kw and 200 KW, respectively. For heavy-duty applications, our HP400 and HP500 models stand out with maximum power capacities of 315 Kw and 355 Kw. The total weight of the HP400 is 23,000 kg and the HP500 is 33,150 kg. Our largest model, HP800, makes a difference in the industry with its total weight of 68,650 kg and maximum power capacity of 600 Kw. CONSTMACH cone crushers promise high efficiency, low maintenance costs and long life. Head mantle and feed plate weights are carefully balanced for optimum performance on each model. All models from HP200 to HP800 offer countersink rotation speeds ranging from 700-1200 rpm to suit a variety of operating conditions. By choosing CONSTMACH cone crushers with these superior features, you can increase your production efficiency and profitability. Manufactured using high quality materials and advanced manufacturing techniques, these breakers offer reliable performance for many years. An ideal choice for those looking for both performance and durability, CONSTMACH cone crushers add value to your investment. HP100 Cone Crusher Technical Specifications Total Weight: 5,400 kg / 11,900 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 1.320 kg / 2.910 Lbs Head Mantle and Feed Plate: 600 kg / 1.325 Lbs Recommended Maximum Power: 90 Kw / 125 HP Countersink Spindle Speed: 750 - 1200 rpm HP200 Cone Crusher Technical Specifications Total Weight: 10,400 kg / 22,960 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 2.680 kg / 5.915 Lbs Head Mantle and Feed Plate: 1.200 kg / 2.650 Lbs Recommended Maximum Power: 132 Kw / 200 HP Csnqybspqg Countersink Spindle Speed: 750 - 1200 rpm HP300 Cone Crusher Technical Specifications Total Weight: 15,810 kg / 33,490 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 3.525 kg / 7.765 Lbs Head Mantle and Feed Plate: 2.060 kg / 4.550 Lbs Recommended Maximum Power: 200 Kw / 300 HP Countersink Spindle Speed: 700 - 1200 rpm HP400 Cone Crusher Technical Specifications Total Weight: 23,000 kg / 50,600 Lbs Gkodpfeud Tansx Aabsc Weight of Boiler, Boiler Liner, Cover and Bunker: 4.800 kg / 10.575 Lbs Head Mantle and Feed Plate: 3.240 kg / 7.130 Lbs Recommended Maximum Power: 315 Kw / 400 HP Countersink Spindle Speed: 700 - 1000 rpm HP500 Cone Crusher Technical Specifications Total Weight: 33,150 kg / 73,000 Lbs Weight of Boiler, Boiler Liner, Cover and Bunker: 7.200 kg / 15.800 Lbs Head Mantle and Feed Plate: 5.120 kg / 11.280 Lbs Recommended Maximum Power: 355 Kw / 500 HP Countersink Spindle Speed: 700 - 950 rpm

Condition: used, Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Gkedpfxop R Nlno Aabjc Volume: 300 liters

Condition: new, Year of construction: 2025, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CSS-440 Capacity: 300-550 t/h Max. Feed opening; EC 450 mm C 400 mm MC 300 mm Motor: 220-250 kW, Head diameter: 1300 mm Dimensions (width * height): 3100 *2850 mm Countershaft Speed-rpm: 750-1200 Weight: 31000 kg * Hydroset Control * Automatic Load Protection Gedpoxb A Tmjfx Aabekc * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2001, Glass GS/S 600 Roller tenderizer is designed for both sides incision of muscle tissue surface in order to increase the surface of brine absorption and also incision of hard tissues and tendons located in a muscle. Such a process influences the increase of the brine absorption surface and, as a result, very good plasticization of individual muscle elements. Gjdpfx Aaetzc Abebokc Manufacturer: Glass Model: GS/S 600 Height: 1500 mm Width: 1000 mm Length: 1400 mm Weight: 350 kg Electric power supply: 400V 50Hz 3N Total power: 1,5 kW

Condition: refurbished (used), functionality: fully functional, Year of construction: 2005, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2024, Cross belt glass grinding machine for sale, in excellent condition as seen in the pictures! 400V, 50Hz. Gkodpsv A T Aljfx Aabsc Can be picked up from our premises immediately!

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Gkedjik E Sropfx Aabsc Min. glass size: 200 x 400 mm Glass thickness: 4 - 19 mm Start-Up: 2018

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. Gkjdpfx Aajr Ak Exoboc There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), Glass VSM150 Mixer Gkjdpjp Duuwofx Aaboc 150Kg glass mixer, tilting for discharge, stainless lid, with vac pump, For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, mobile, 3Ph

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CC300 Capacity: 300-400 t/h Max. Feed opening: EC 215 mm C 175 mm MC 140 mm M 110 mm MF 85 mm Gkjdpfx Aaowak Thjbjc F 70 mm EF 38 mm Motor: 200 kW, Head diameter: 1200 mm Dimensions (width * height): 3030 * 2775 mm Countershaft Speed-rpm: 750-1200 Weight: 23000 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), The line for gnocchi includes: - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters Gedpfx Aajfwmt Uobskc

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. Gjdpfx Aaju Nhiqebskc The machine comes with original electrical documentation.

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Gkedpfx Aaeu Ivauobsc Dimensions 260 x 160 cm Height 215 cm.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Automatic spacer bender Gkedpfx Aajv Epfusboc WHS2 The automatic spacer bender machine WHS is suitable to bend aluminum and Warm Edge bars: Chromatech Ultra, TGI Spacer M, Thermix TX.N Plus, Thermobar, Multitech, Swisspacer Advance, Swisspacer Ultimate. It is possible to create square and rectangular, straight shapes like trapezium, triangle, pentagon and optionally are available curves and arcs shapes. The interface operations are done using a Personal Computer, the program is easy to use and allows the users to manage all the working parameters, as well as set up specific condition for different type of spacers. The program to optimize the work can optimize up to 1,200 different measures of work, considering the type and color of material used and width. The program can be interfaced with the most used optimization software of cutting tables (Perfect Cut, Optima, Albat-Wirsam, Hanic, etc). The program is available in Italian, English, French, Spanish, German. The machinery is equipped with tele-assistance and video-assistance. Technical features Workable spacers: H 6-7 mm; Aluminum / Chromatech Ultra / TGI Spacer M / Thermix TX.N Plus / Thermobar / Multitech / Swisspacer Advance / Swisspacer Ultimate 8-24 mm. Spacer frames min size: 200x280mm. Spacer frames max size: 1800x2450mm in one step (larger size in two steps) Bender dimension: L 4,850mm, W 2,040mm, H 2,550mm. Spacer stock dimension: L 5,500mm, W 1,300mm, H 1,650mm

Year of construction: 2007, condition: excellent (used), Glass VSM150 Mixer Serial: 2941 Godpfxjpyhhte Aabokc 150Kg glass mixer, tilting for discharge, stainless lid and sight hole. For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, with easytouch interval switch for 10 programmes with timer and rest settings, with ,manual, mobile, 3Ph

Condition: excellent (used), Year of construction: 2020, CATALYTIC COATING EQUIPMENT Gkjdpfxsvcc Epj Aabsc

Year of construction: 2008, condition: excellent (used), GLASS VAS VSM 1000 ID.NO. 2416 GLASS VAS VSM 1000 liter chopping / processing machine year mod 2008. Suitable for making mayonnaise, hummus, sauces, pastes, dairy products and much more! Available for immediate delivery! Gedpfx Ajixz Tneabskc

Condition: excellent (used), Year of construction: 2018, HYDROPHOBIC COATING APPLICATION DEVICE Gksdpjvcc D Esfx Aabjc

Condition: excellent (used), Year of construction: 2016, Jumbo glass turntable Godpfxevccn Dj Aabjkc

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 08/2016, Automatic glass gantry with loading sotl with a set of rails 15 m long year of production 2016 Gkjdpfx Ajur N Hnjabsc in continuous production

Condition: excellent (used), Year of construction: 2020, Automatic glass gantry with loading sotl with a set of rails year of production 2020 Uuwiqbzorl Gkjdpova E Izofx Aaboc