Used Golmatic Md 23 for sale (5,315)

Condition: excellent (used), working width 230mm working height 120mm Kwsdepkwaxjpfx Adwjt 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm Ksdpfx Adox Ttbnswjwt working width: 260 mm working height: 160 mm feed: 4 kW

Condition: good (used), WEINIG UNIMAT 23 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW Kodpfx Aoyahubjdwjwt 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 7,5 KW 8: BOTTOM 7,5 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 15 x DRIVEN TOP FEED ROLLERS 5 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER POSSIBLE TO INCREASE MOTOR SIZES AS NEEDED

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Kwsdovtpk Hjpfx Adwot head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: used, Year of construction: 1980, 1980 tool taper MK 205 - 1450 m/min. boring range: 3 - 40 mm Kodpfx Ador Dv Tgewjwt +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm Kodpfx Adox Rqk Iowowt - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Year of construction: 1988, condition: good (used), Trochner plants Motan Type:MD 200 HT Year 1988 200 cm3/h KW 17 Plus 2x reserves about 200 kg Man can also up to 8x complete tank Ksdpfxogk Nw Ee Adwjwt

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 96409, type of input current: three-phase, input voltage: 380 V, power: 73 kW (99.25 HP), input frequency: 50 Hz, input current: 159 A, We offer this used Weinig Unimat 23 moulder, year of construction 2002. Machine number: 96409 Machine type: Unimat 23 Year of construction: 2002 Circuit drawing number: B.96409 Operating voltage: 3 x 380 V 50 Hz Control voltage: 230 V 50 Hz Nominal current most powerful motor: 29 A Nominal current: 159 A Main fuse: 160 A Kodpfxex Ttyde Adwewt Power: 73 kW If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: YV2J4DAC72A54xxxx, mileage: 5,40,000 km, Year of construction: 2001, Please contact ATS Norway for more information Please provide reference number upon request: 21881 Specifications: EU-approved until 06.06.2026 Mileage: 540,000 km Transmission: Manual Engine brake 6x2 Good tyres Full air suspension Rear support legs Platform length: approx. 6 m Palfinger PK 23002 (2006 model) Remote control Front and rear support legs Euro 3 Side boards included Sleeper bunk Radio/CD Climate control/AC Service done by owner Kwsdpoxy Etaefx Adwst Video available Ready for delivery Description:Volvo FM12 crane truck from 2001, equipped with a 23 t/m Palfinger crane from 2006.The truck is EU-approved and ready for delivery. Service and maintenance have been performed by the owner. Km: 540000 HK: 420 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 9540 Total Weight: 27000 Payload: 17385 Width: 255 Length: 960 Euro: 3 Model: FM12 6x2 Kranbil m/ 23 t/m Palfinger kran Gearbox: Manual

Condition: used, machine/vehicle number: YS2P6X2000200xxxx, mileage: 8,20,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21454 Specifications: EU-approved until 30.07.2026 Kedoxg Abnjpfx Adwjwt 2005 model Approx. 820,000 km Manual gearbox Tires (see pictures) 20T hooklift Palfinger 23 t/m crane from 1999 Support legs Length: 900 cm Width: 250 cm Wheelbase: 490 / 134 cm Curb weight: 15,550 kg 6x2 340 hp Rotating warning bar Tow hitch Rearview camera Radio/CD Air conditioning Description:Scania P340 hooklift/crane truck from 2005.Equipped with a Palfinger 23 t/m crane from 1999. The main cylinder has a leak.Flatbed and container can be included at an additional cost.Service history available.Available for prompt delivery. Km: 820000 HK: 340 Technical approved: Yes EU-approved until: 30.07.2026 Own weight: 15550 Total Weight: 29000 Payload: 13375 Width: 250 Length: 900 Euro: 3 Model: P340 Krok/kranbil 23 t/m Palfinger kran Gearbox: Manual

Condition: reconditioned (used), functionality: fully functional, operating pressure: 230 bar, empty load weight: 67 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 10/23-4 SX COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and an adjustable nozzle. The integrated hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 230 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. Kodpfx Adox Ttzuswswt TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 230 Maximum pressure (bar): 253 Connection power (kW): 7.8 Weight (kg): 67 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 20 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, Year of construction: 2025, Ring Rolling machine ZOPF - model ZB 30/3 MD Ksdpfsdktnvsx Adwewt TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: used, mileage: 11,835 km, power: 130 kW (176.75 HP), first registration: 07/2022, fuel type: diesel, empty load weight: 4,928 kg, maximum load weight: 2,562 kg, overall weight: 7,490 kg, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 3,020 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, steel body, Kz. House, Swing seat, Double bench seat, Rear window, Electric mirror, Heated mirror, Electric window left, Electric window right, Air conditioning, Sun visor, Cruise control, Switch 6, ABS (anti-lock braking system), Traction control (ASR), Constant throttle, Power take-off, Frame cladding, Differential lock, Leaf suspension, Towing hitch ball head, Towing hitch air+light, Lashing eyes, U-protection, Swing flaps, Roof hatch, Environmental badge green Wheelbase: 3020 mm Body: Meiller 3-sided tipper, fold-down steel drop sides, springs supported front axle, 4.1 t, rear axle, disc wheel 325, hypoid, 6.2 t, differential lock rear axle, electronic brake system with ABS and ASR, disc brakes, on VA and HA, condensation water monitoring, for compressed air system, stabilizer, under frame, rear axle, standard cockpit, pollen filter, ClassicSpace, rain and light sensor, daytime running lights, High Performance Engine Brake, NA MB 60-1c, pump, Meiller pump, 5-piston, type 254/1, tipper body, floor 4 mm, lashing recesses, in tipper body floor, Stability Control Assist (ESP), lane departure warning system, Active Brake Assist, max. towing weight 21,000 kg. Gross train weight 21,000 kg. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kwjdpfx Ajycuwnsdwjt - .

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control Kwodevi Haqopfx Adwet 3-jaw chuck diameter 250mm 12-fold revolver tail stock chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2011, fuel type: electric, Weights Empty weight: 6.940 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.430 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 691 m Transport dimensions (LxWxH): 6,53x1,5x1,98 Production country: UK Additional information Please contact Christian Theißen for more information Units: 5218, 5220 Manufacturer: Genie Model: Z40/23N RJ Year of build: 2011 Condition: Used Data: Max. working height: 14,32 m Platform height: 12,32 m Max. reach: 6,91 m Kjdpfsv Tii Asx Adwswt Platform lifting capacity: 227 kg Platform dimensions LxW: 1,17 x 0,76 m Swivel range: 355° Max. climbing capacity: 30 % Total dimensions LxWxH: 6,53 x 1,50 x 1,98 m Ground clearance: 0,24 m Drive type: Battery Own weight: 6.940 kg Special features: Swivel work basket 180°, vertical cage arm 128°, white tires. Location: 41468 Neuss: immediately available

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump Kwodpsv Ay T Defx Adwjt *

Condition: good (used), working width 230mm working height 120mm spindle diameter 40mm 4 heads + unit for cutting glazing bead Ksdevtt Ayjpfx Adwowt control from ATS panel head adjustment in two axes electric adjustment of the pressure beam smooth adjustment of feed speed The machine worked in line with other machines.

Condition: excellent (used), Planer 9 heads Kodpfxotrdwte Adwewt Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Condition: good (used), 744 USED Matador MD 101 deck oven, area baking 12 sq m. INTERNAL DIMENSIONS OF THE BAKING CHAMBER (in cm): - width 120 - depth 200 - height: 3 upper ones 20, 2 lower ones - extendable 14 EXTERNAL DIMENSIONS OF THE OVEN (in cm): - width 183 - depth 340 - height 235 EQUIPMENT: - gas or oil burner Kwjdpfx Adorvxtzswot The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), 724 USED WP Matador MD 125 deck/shelf oven with baking area: 12.5 sq m. Gas or oil burner. EXTERNAL DIMENSIONS (in cm): -W: 183, -L: 386, -H: 252. CHAMBER DIMENSIONS (in com.): -W: 120, -L: 200, EQUIPMENT: -gas/oil burner, -5-chamber. Kedperqikmjfx Adwowt ​ The device is in our warehouse (36-068 Bachórz Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with dual-axis control for left and upper spindle, brand new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) Kwedpfx Aswwwkhedwet 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Electric height adjustment for upper spindle Optional with/without feed system Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. jointing allowance: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control system: PLC control Spindle readout: mechanical digital display Infeed rollers before jointer: Yes Air cushion table: three-strip Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, Used machine Year of manufacture: 1989 Completely overhauled! Very good condition Material width: 630 mm Material thickness: 7.00 mm Number of straightening rollers: 23 Sheet thickness - min.: 0.30 mm Straightening roller diameter: approx. 30 mm Workpiece dimensions: min. 50 mm Speed: 10 m/min Frame opening: approx. 650 mm Kwjdjx I Htajpfx Adwot Total power requirement: 5.50 kW Machine weight: approx. 6.00 t Space requirement: approx. 2.65 x 1.80 x 1.50 m Hydraulic straightening machine - max. vertical roller gap 7.50 mm - Infeed with conveyor belt – speed adjustable - with hydraulic opening of the roller housing - with automatic oil lubrication for gearbox and universal joints - Main drive motor 4 kW - Digital measuring device

Condition: ready for operation (used), A pillar drilling machine in double column design Ecker und Schmidt is available. Number of spindles: 2, drilling capacity in steel: 23mm, throat depth: 330mm, drilling stroke: 120mm, max. workpiece height: 750mm, spindle taper: MK1, column diameter: 130mm, table dimensions X/Y: 760mm/360mm. Machine dimensions X/Y/Z: approx. 1100mm/1150mm/2100mm, weight: approx. 700kg. On site inspection is possible. Kwjdpfxsya Hxle Adwot

Condition: used, Year of construction: 2014, SHIBAURA BSF 34-23 CNC Siemens 840DSL x=13000 mm y=5000 mm z=3250 mm Rotary table 5000x4000mm, max load =80 to, travel 3000 mm It was completlly retroffited with CNC SIEMENS 840 DSL. Video with the machine working is available on request. Kjdpfocr Rkdox Adwowt Complete documentation is available. More details on request.

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Axle drive boring mill: WMW Union -Max. Speed: 2500 rpm Kwjdjdz Drzepfx Adwst -Torque: 25 Nm -Shaft: Ø 35 mm -Construction: B5 -Dimensions: 520/500/H270 mm -Weight: 45 kg