Used Planer And Moulder for sale (7,955)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) Njdpfeh U Nvkex Ag Isdd MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 1989, workpiece width (max.): 220 mm, Technical Sales Description – Hydromat 17B General Information Manufacturer: Weinig AG Model: Hydromat 17B Type: High-Performance Profile Moulder / Planing and Moulding Machine Year of Manufacture: 1989 Operating Voltage: 380 V / 50 Hz Description Heavy-duty, high-performance planing and moulding machine constructed with vibration-damping, torsion-resistant cast-iron components in a modular system. Designed for precise and efficient wood processing with high continuous output. Mechanical feed, adjustable within the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long with quick adjustment feature. Chip removal adjustment for surfacing and jointing spindles, each with a setting range of 10 mm. Technical Data Feed speed: 5 – 35 m/min, mechanical Feed motor: 5.5 kW / 7.5 HP Operating voltage: 380 V / 50 Hz Table length: 2000 mm Chip removal adjustment range: 10 mm (surfacing and jointing sides) Machine configuration: Without outboard bearing, high-performance execution CNC control: Siemens S5-130 WB, with battery-buffered RAM memory CNC Control • 12" display • Up to 16 axes • mm/inch switching • Operator guidance and diagnostic system with approximately 120 messages • External input possible • Emergency operation in case of electronics failure Special Equipment 4 NC controls for axis regulation 2 motor upgrades from 5.5 kW to 7.5 kW (10 HP) for spindle no. 1 and 6 Handheld control integrated Preparation for mounting a universal spindle Air-circulating pump for table resin removal, manually operated Operating hours counter Straight jointer for spindles 4, 5, 6 and 7 Cutting circle diameter 250 mm for spindle 5 2 NC controls for vertical/horizontal positioning 1 jointing unit with free-running drive system Guide rollers for infeed rollers (both axes) Feeding magazine type EHM 14 for Hydromat 17B Working width: 220 mm Working height from: 10 mm Workpiece lengths: 300 – 3000 mm Feed: Pneumatic, depending on workpiece length Required air pressure: 6 bar Ndsdpfxoxyawao Ag Ijd Cycle rate: 100 cycles/min Feed force: 1500 N at 6 bar

Condition: excellent (used), - Max. width of processed element 24 cm - Max. height of processed element 12 cm - 5 planing heads: 1) Horizontal 24 cm – 4-kW motor 2) Vertical right 13 cm – 11-kW motor 3) Vertical left 13 cm – 11-kW motor 4) Horizontal top 18 cm – 5.5-kW motor 5) 5 UNIVERSAL HEAD – 360° ROTATABLE – 5.5-kW motor - 40 mm spindle diameter - PNEUMATIC PRESSURE OF THE DRIVE SHAFT - FEED VIA CARDAN SHAFT - 2.2-kW feed motor Ndedewq Dwnspfx Ag Iod - ELECTRICALLY ADJUSTABLE PLANING THICKNESS - Length of the feed table 188 cm - Diameter of suction nozzles 140 mm x 3; 110 mm x 2 Overall dimensions of the machine: – Length 420 cm – Width 190 cm – Height 170 cm

Condition: good (used), Year of construction: 2020, Beautiful modern planer moulder from market leader Weinig, model Powermat 700. 5 spindles, with the 5th spindle underneath. Ndodpfxjxydmls Ag Ied

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW Ndedpfevgnb Rsx Ag Iod 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool.

Condition: excellent (used), set of tools, planer heads for moulder Nsdewbwkcjpfx Ag Iedd

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Ndjdpfx Ajvydwzsg Iod Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left Ndedpfsrg Exrsx Ag Isd 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with separate motor, 7.5 kW and spindle brake Nedpowyulusfx Ag Ijdd Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 092323, feed rate X-axis: 24 m/min, working width: 230 mm, spindle diameter: 40 mm, working height: 125 mm, number of spindles: 5, TECHNICAL DETAILS Working width: 230 mm Working height: 125 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Feed speed: 24 m/min Feed motor power: 3 kW Minimum material length: 400 mm Spindles Number of spindles: 5 Lower horizontal spindle power: 7.5 kW Right spindle power: 5.5 kW Nodpfx Agexuqm Ue Iedd Left spindle power: 5.5 kW Upper horizontal spindle power: 7.5 kW Second lower horizontal spindle power: 7.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 370 cm x 200 cm x 190 cm Weight: 3,500 kg Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 EQUIPMENT Continuously adjustable feed Electronic height adjustment Electronic adjustment of the left head Feed via cardan shafts Five upper steel rollers Two upper rubber feed rollers Roller in the table feed Pneumatic material pressure Chromium tables CE marking

Condition: used, Year of construction: 2002, functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm Njdpfxsxk U Tke Ag Ijdd 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min One driven roller in the table at the outfeed.

Condition: excellent (used), Year of construction: 1987, Four-side planer Manufacturer: Weinig Model: Profimat 22 N Year of manufacture: 1987 Planing height: 220 mm Planing width: 120 mm Number of spindles: 4 Feed speed: 5 – 22 m/min, infinitely variable Total power: approx. 17 kW Spindle speed: 6,000 rpm - First spindle: bottom, 4 kW, tool diameter: 125 mm - Second spindle: right, 5.5 kW, tool diameter: 180 mm - Third spindle: left, 5.5 kW, tool diameter: 190 mm Njdpfoww A T Uex Ag Isdd - Fourth spindle: top, 4 kW, tool diameter: 200 mm

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws Ndjdpfxsvbtpo Ag Ijd -cutting cross section 180x220 mm, 150x300 mm

Condition: good (used), Year of construction: 1996, functionality: unexamined, shaft diameter: 50 mm, power: 77.5 kW (105.37 HP), High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N Nodpfx Agexr Hbvj Isdd System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 500 mm, planing height: 300 mm, TIMBERWORK 500x300 planer + 4 bevels Built in 2005 Nsdpfjwmm Alex Ag Iedd Location: Portugal

Condition: ready for operation (used), Guilliet KXR III with mobile spindle for variable widths + Carpentry package final dimension 240x160mm + Infeed before planing + Reinforced motors Nedpfjvq Rnhjx Ag Iodd Number of spindles: 4 pcs, 40mm diameter Maximum profiling tool diameter, left/right: 180mm Vertical spindle adjustment: 40mm Final width: 240 mm Final height: 160 mm Planer table length: 2500 mm Feed speed: continuously adjustable 4.5–27 m/min Reinforced motor power: Planer: 7.5 kW Left/right spindle: 11 kW, 1 motor Thicknessing: 9 kW Feed: 2.2 kW Dimensions approx. (L/W/H): 3160 x 1420 x 1440 mm Machine weight approx. 1700 kg Available immediately from site, as currently installed Optional inspection and reconditioning available at extra cost

Condition: used, feed rate X-axis: 60 m/min, power of feed motor: 18,000 W, Hydraulic feed for Weinig Hydromat. Maximum feed speed 60 m/min. Njdpfx Aexwb I Ijg Iodd

Condition: excellent (used), Year of construction: 1999, Four-side planer Manufacturer: Weinig Type: U 23 EL Year of manufacture: 1999 Number of spindles: 8 Working width: 20 - 230 mm Working height: 8 - 120 mm Planing table length: 2,500 mm Feed: 4 kW Feed speed: 4 - 24 m/min Total power: approx. 60 kW 1 spindle: bottom horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 125 - 180 mm 2 spindle: right, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 250 mm 3 spindle: left, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 200 mm Ndedpsvy Ebusfx Ag Isd 4 Spindle: Right, vertical 7.5 kw, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 250 mm 5 Spindle: Top, horizontal 7.5 kw, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 200 mm 6 Spindle: Bottom, horizontal 7.5 kw, 50 mm diameter, 7,200 rpm, tool diameter: 112 - 250 mm 7 Spindle: Top, horizontal 7.5 kw, 50 mm diameter, 7,200 rpm, tool diameter: 112 - 250 mm 8 Spindle - saw unit: Top, horizontal 2.2 kw, 40 mm diameter, 8,000 rpm, tool diameter: 180 mm Including two conveyor tables

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 spindles, Working width: 230 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 37 kW / 12-120 m/min Spindle configuration: 1 - Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2 - Right (11 kW) 3 - Left (11 kW) 4 - Top (37 kW) – with fully automatic straight jointer 5 - Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6 - Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 8 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 9 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 10 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table and 2 powered rollers in the table. Both table rollers are liftable. Table height adjustment with electronic digital display. Includes 2 heavy-duty lateral pressure rollers, diameter 140 mm, pneumatically actuated. Support feet, height 320 mm, for table height of 1190 mm. Marathon POWER Coating for machine table, fences and guide rails (excluding infeed table and special table plates). Special coating for the protection of table plates, fences, and guide rails against excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, particle board, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, with a diameter of 120 mm. Located in the area of the right and left spindle. Ndedpfx Agexvmm Ts Iod

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Njdpfev Id Ngjx Ag Isdd Working width: 230 mm Working height: 120 mm Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of shafts: 6 Grooving saw: Yes Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Weight: approx. 3.5 tons

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Ndsdpfx Agjv Er Ufs Ijd Feed speed 8-60m/min

Condition: excellent (used), Year of construction: 1989, Four-side planer Manufacturer: GUILLIET Type: KXY 180 Year of manufacture: 1989 Number of spindles: 4 Working width: 220 mm Nedpfovuxymjx Ag Isdd Working height: 120 mm Planing table length: 2,000 mm Feed power: 1.5 kW Feed speed: 4.5 - 27 m/min, stepless Total power: 15.5 kW Spindle speed: 6,000 rpm Weight: approx. 1,600 kg Dimensions: 3,700 x 1,500 x 1,300 mm

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Nsdpfx Agov Skays Isdd Weinig 814, Weinig 811, Weinig 806

Condition: excellent (used), functionality: fully functional, power of feed motor: 11,000 W, Hydraulic feed from Weinig Ndodpfx Agsv Skbkj Isd Feed speed 120 m/min Motor power 11 kW

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) Nodpfx Agsu Udd Ss Ijdd 6 driven rollers in the table