Used Grease Gun for sale (1,810)

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 Dedpfx Aoxx Ti Tofpjkh SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, Year of construction: 2000, functionality: fully functional, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X850 Y290 Z475 mm. Table size: 1250 x 280 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Dsdpfx Afsx Ex Sispekh Motor: 7,5 HP. Digital readout: Electronica EL403M (X, Y & Z) Year: 2000 Country of origin: Spain. Size (L x W x H): 2050 x 2220 x 2050 mm. Weight: 1900 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout. With Hurré milling head and supports. All our machines are tested and serviced before delivery.

Condition: new, Year of construction: 2024, GG 015 EURO 5 The new Günter Grossmann GG015 compact loader. The loader Günter Grossmann GG015 (1500 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very fine. The control panel is very nice and clear. The cab is soundproofed, insulated, equipped with heating, very comfortable and nicely glazed which allows working safely and comfortably. The machine has a very durable construction. The machine is equipped with a quick coupler, which allows accessories to be changed quickly without leaving the cab. Additional equipment: 4 in 1 bucket, alligator grapple, alligator grapple for trees, straw or silage. We are the largest dealer in Poland, Czech Republic and Hungary. We have all spare parts for our branded machines. GG015 loader + bucket + pallet forks + quick coupling Specification Model GG015 Engine Xinchai euro 5 Engine type: Inline, water-cooled four-stroke diesel engine Rated output: 36.8KW -( 50hp ) Rated speed: 2200 rev/min (rpm) Steering: Fully hydraulic Pressure in the system: 1.2 ~ 1.5 MPa Brake One hydraulic brake on four wheels Parking brake: manual tire 12-16.5 Wheelbase: 2100 mm Track: 1720 mm MAIN DIMENSIONS Overall length (bucket on ground): 5200 mm Overall height: 2730 mm Overall width: 1540 mm RANGE Bucket capacity: 0.7 m3 Bucket width: 1750 mm Max. breaking force: 36.8KN Dksdpfx Aou Dcgyjfpjh Capacity: 1500 kg Machine weight: 3550 kg Driving: Four-wheel drive Min. Turning radius: 4500 mm Unloading height: 2650 mm Drive system: Hydraulic transducer

Condition: new, Year of construction: 2024, operating hours: 1 h, GG06C Loader New Günter Grossmann GG06C compact cab loader. The Günter Grossmann GG06C loader (600 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The shovel is very powerful and can work under all conditions. The loader is very fine. The control panel is very nice and clear. Dkedpfotydayox Afpjh The machine has a very durable structure. The machine is equipped with a quick coupler that allows you to quickly change accessories. We are manufacturer and guarantee high quality. We have representation in every EU country. We stock all spare parts for our branded machines in Europe Please contact us for an appointment Gunter Grossmann machine a Very durable, strong excavator model: available models GG800 GG1000 and the GG1600 GG1700 And more from the international brand Günter Grossmann. Each Günter Grossmann machine is covered by the company warranty. a great machine for the most demanding construction,excavation,earthworks for all our machine,s you can contact us for an appointment to see or test one of the machine,s this can with us 7 days a week also we are available in the evening hours so that your normal work can continue. Specification GG06C Specification Bucket capacity (CBM): 0.3 Loading capacity: 600kg Machine weight: 1670kg Engine: Perkins Engine power: 25 HP Dimensions (L x H x D) 3325 x 2360 x 1155 Wheel dimensions: 27*8.5-15TL Heated cabin: Yes MAIN DIMENSIONS Length: 3325 mm Width: 1155 mm Height: 2360 mm WORKING RANGE Lifting height: 2.6 m Speed: 18 km/h ACCESSORIES to order Hay forks: Pallet forks 4in1 spoon (crocodile) Hay grab: Snowplow:

Condition: new, functionality: fully functional, mileage: 1 km, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 2,800 kg, empty load weight: 2,800 kg, operation weight: 2,800 kg, maximum load weight: 1,400 kg, lifting power: 700 kg/m, lifting height: 2,050 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: cabin, GG700K Technical Specifications Engine Model: Kubota V2403 Dkedpfjxuwvcjx Afpsh Net Power: 50 hp / 2500 rpm Engine Type: Inline 4-cylinder, water-cooled, 4-stroke diesel engine Rated Operating Capacity: 700 kg Rated Load Limit: 1,400 kg Operating Weight: 2,800 kg Bucket Capacity: 0.4–0.5 m³ Maximum Travel Speed: 12 km/h Hydraulic Pump Flow: 75 L/min Fuel Tank Capacity: 70 liters Dump Angle: 30° Dump Height: 2,380 mm Rollback Angle to Ground: 26° Lowering Angle: 20° Length: 3,350 mm Width: 1,720 mm Height: 2,050 mm Height at Maximum Reach: 3,980 mm Height to Bucket Hinge Pin: 3,080 mm Width with Bucket: 1,730 mm Track Width: 1,450 mm Wheelbase: 991 mm Ground Clearance: 180 mm Compact Loader GG700K Skid Steer Loader The GG700K is an advanced skid steer loader delivering high power, reliability, and exceptional performance in demanding work environments. Equipped with modern technology, it is perfectly suited for construction, agriculture, and tasks requiring both mobility and strength. Engine and Drive Powered by a Kubota V2403, a water-cooled, inline four-cylinder diesel engine delivering 50 hp at 2,500 rpm. This engine ensures fuel efficiency, durability, and reliable operation under heavy-duty conditions. Hydraulic System and Performance The hydraulic system provides a pump output of 75 l/min and supports a bucket capacity of 0.4 to 0.5 m³. It features a 30° dump angle, a dump height up to 2,380 mm, a 26° rollback angle to the ground, and a 20° lowering angle, ensuring stability and efficiency on rough terrain. Weight and Load Capacity With an operating weight of 2,800 kg, the GG700K can handle rated loads of 700 kg and up to 1,400 kg maximum load limit. This makes the GG700K ideal for medium-duty lifting and material transport. Speed and Maneuverability The machine reaches a maximum travel speed of 12 km/h, combining compact dimensions with excellent maneuverability for efficient operation in confined spaces and challenging conditions.

Condition: used, static maximum load 4,000 kg diameter 160 mm height 35 mm thread M 16 x 1.5 levelling height 20 mm weight 2.2 kg - 95 units on stock - new - price per unit Dkodpfxofii Dij Afpeh  

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Dksdpfx Asw Ra Rpjfpeh Electric power: 3 kW Voltage: 400 V Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: used, Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Dkjdetrgunjpfx Afpsh Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW

Condition: used, Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Dedpfeui Iylox Afpokh Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Condition: used, Type: PI 54 Number of needles: 54 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 8kW Machine dimension in cm: Width: 85 Length: 200 Height: 230 Dkedpfx Aok R Tqcsfpjh Delivery time: 30 working days after advanced payment

Condition: used, Type: PI 26 Dedpok Ruynjfx Afpskh Number of needles: 26 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 4.5kW Machine dimension in cm: Width: 70 Length: 170 Height: 200 Delivery time: 30 working days after advanced payment

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Dkedpfx Asxyaivjfpoh

Condition: excellent (used), Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F configuration Performance data in R404A Condenser block: The refrigerant-carrying core tubes are relieved of stress by the patented support tube design. This results in increased leak resistance. Copper pipe Ø 12 mm, 50 x 25 mm offset Aluminum fins, 2.4 mm spacing Copper distribution and collection pipes and pipe connections Dedpfxeq A Tunj Afpekh Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Fans: Low-noise axial fans with maintenance-free motors with IP54 protection, three-phase 400/3/50, according to DIN 40050 Design: Insulation class F Permissible conveying medium temperature -30 to +55°C All three-phase fans are generally available with 2 speeds (Δ-Y switching) and speed-controlled via Güntner control units Case: Galvanized and painted sheet steel, RAL 7032 Rated power: 369.5 kW Air volume flow: 93,800 m³/h Number of Fans: 2 x 2 Motor P = 2200W I = 4.20A (400V) n = 650 min Rated voltage: 400V Other items in different sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, Automate your cleaning process with Superior Series equipment: lifting device with support grid for easy handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 7,500 L Tank capacity: 390L Außenmasse:1680x1130x1720mm Useful dimensions grate:870x520x385mm Dodpsf E Ntvofx Afpokh Loading weight: 250kg Ultrasonic frequency: 28/40kHz Ultrasonic power:2400W

Condition: used, For sale are 2 hot runner control units from Günther – one with 10 zones and one 15-zone unit. Price: 10-zone unit = €1,300 Dedpfx Asv Sml Ssfpjkh Price: 15-zone unit = €1,600 Dimensions (L x W x H): 470 mm x 370 mm x 150 mm Weight: approx. 4 kg Plug: 32A / 400 Volt

Condition: used, Used Complet Bitzer Co2 Cooling installation for processing rooms and or corridors This unit, in excellent condition, is equipped with the following main components: 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm - Fans: 4 x 350 mm Dkjdpfx Afexpvtcepoh - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Year of construction: 2018, condition: used, Two-side evaporator Guntner Dedpfx Afoxpuv Aspjkh -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H103-000-000, conveyor belt width: 1,600 mm, conveyor belt speed: 1,700 mm/s, total width: 1,854 mm, power: 2.2 kW (2.99 HP), axle spacing: 4,450 mm, construction width: 1,854 mm, Center distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Cheek height: 240 mm Conveyor speed: 1.0 m/s Dkodpfxou T Ewwo Afpoh Belt quality: EP 400/3 4:2.0 mm normal quality Profiling: Steep conveyor belt, PB 1290 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 2.2 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 160 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø 50 mm Idlers: Ø 63.5 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H101-000-000, conveyor belt width: 1,420 mm, conveyor belt speed: 1,700 mm/s, total width: 1,420 mm, power: 4 kW (5.44 HP), axle spacing: 2,450 mm, construction width: 1,420 mm, Center distance: 2,450 mm Belt width: 1,200 mm Overall width: 1,420 mm Cheek height: 310 mm Conveyor speed: 1.7 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 900 mm / PH 32 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Idler drum: Ø 190 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 63.5 mm fitted with buffer rings Idler spacing: 500 mm Dkedpfxeu S Adre Afpoh Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Clamping station: M16 threaded spindle

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network. Dksdovv Nwxopfx Afpeh

Year of construction: 2013, condition: good (used), Crossover / Platform / Staircase, Günzburger – used – Ex-works price: only €1,795 (net), dismantled, packed and loaded! Manufacturer: Günzburger Steigtechnik GmbH Type: unknown Year of manufacture: 2013 Permissible load: 200 kg Platform / crossover height: approx. 1.25 m Platform dimensions: approx. L: 80 cm, W: 80 cm step width Total width: approx. 86 cm Djdpfx Afjwxv Eyjpokh Steps: width approx. 80 cm Railing height: approx. 1.12 m Total height (with railing): approx. 2.35 m 2 x 6 steps Railing on both sides Original price: over €3,000 (net) Condition: good Available: immediately Location: Frankenberg warehouse

Condition: excellent (used), functionality: fully functional, Extraction Djdpfx Aow Tuhhsfpekh Dimensions ....x.....x...x cm

Condition: used, Condenser Guntner -Type: GVH 090.1B/2x4-S(D) -Cooling capacity: 477 kW / 399 kW -Number of fans: 8 x 900 mm -RPM: 440/350 -Dimensions: 9700 x 2290 x 1850 mm -Volume: 218 L Dodpjxg Nhbjfx Afpskh -Quantity in stock: 1 -Stock number: SK 169 -Condition: Used in very good condition

Condition: used, Condenser Guntner -Type: GVH 082B/2x4 ND -Cooling capacity: 620/490 kW -Number of fans: 8 x 800 mm Dkjdpfxjxg Na Dj Afpjh -RPM: 900/700 -Dimensions: 6980 x 2380 x 1880 mm -Quantity in stock: 1 -Stock number: SK 168 -Condition: Used in very good condition

Condition: new, Year of construction: 2025, Technical Parameters Model: RST-FLC-2000W/3000W Laser: Raycus fiber laser Laser power: 2000W / 3000W Laser wavelength: 1064nm Frequency: 10–50 kHz Cooling method: Water cooling Cooling water: Deionized water Water temperature: 23–26°C Net weight: 160kg (2000W) / 200kg (3000W) Dodpfswznqgjx Afpekh Dimensions: 98 × 122 × 143 cm Total power: 2000W / 3000W Scan width: 10–80 mm Mode of operation: Handheld or automatic Operating temperature: 0–40°C Price Fiber Laser Cleaning Machine RST-FLC-2000W/3000W Connection: 230V / 380–400V – 3PH 50Hz RAYCUS 2000W (230V)……….€12,500 RAYCUS 3000W (380V)……….€15,500