Used Grease Gun for sale (2,376)

Condition: good (used), Year of construction: 2007, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, spindle speed (max.): 3,000 rpm, table load: 10,000 kg, overall weight: 24,000 kg, Travelling Column Milling Machine LAGUN GBM 42 – Heidenhain iTNC 530 (Year of Manufacture 2007) We are offering a used LAGUN GBM 42 travelling column milling machine, year of manufacture 2007. The machine is in very good condition. Technical Data Control: Heidenhain iTNC 530 Travel paths:  X-axis: 4,000 mm  Y-axis: 1,200 mm  Z-axis: 1,500 mm Table size: 4,200 × 1,000 mm Max. table load: 10,000 kg Spindle taper: ISO 50 / SK 50 Spindle speed: up to 3,000 rpm Spindle motor power: 28 kW Rapid traverse: 10 m/min (X/Y/Z) Blsdextvawepfx Abzep Automatic universal milling head: 2.5° × 2.5° Machine weight: approx. 24,000 kg Dimensions (L×W×H): approx. 10,000 × 3,500 × 4,000 mm Cooling: coolant tank 270 l, pump 20 l/min Equipment Fully automatic universal milling head 2.5° x 2.5° Dividing head Electronic handwheel Condition Good mechanical and electrical condition Immediately available Location: France

Condition: new, functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Bledpfxoxr Rwhs Abzsp Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: new, FACTORY-NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis travel: 4,000 mm Z-axis travel: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swiveling head 1° x 1° (optionally with fixed ram Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric guarding (open at top) Blodpfxeq I Nkbo Abzep Only inquiries from Germany will be processed.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10521 Manufacturer: LAGUN Type: CM 6 Bjdpexc Tttsfx Abzjlp Year of construction: 2009 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 6000 mm Y-Travel: 1200 mm Z-Travel: 2000 mm C-Axis: 0,001 ° Rapid Traverse X/Y/Z: 30 m / min Table surface area (LxW): 7500 x 1100 mm Tool changer: 60 Drive power spindle: 60 kW Table load max.: 5.000 kg Tool Taper: SK 50 Spindle Speeds: 6.000 RPM Further information: Automatic universal swivel head 1° x 1° incl. accessories, tools, holders 4th axis preparation (rotary table) Positioning accuracy: ± 0.030 mm Repeat accuracy: ± 0.010 mm Machine is in production and can be inspected under power at any time.

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension Bedpsuq Iy Refx Abzolp with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: excellent (used), Year of construction: 2000, Lagun GUM 125 X-axis travel: 1050 mm Y-axis travel: 330 mm Z-axis travel: 475 mm Table: 1250 x 280 mm Speeds: 35 - 1800 rpm Number of feeds: 12 Feed - longitudinal/cross: 20 - 920 mm/min Feed - vertical: 6 - 276 mm/min Tool taper: ISO 40 Bjdpfsxp U Rysx Abzolp Total power requirement: 5.5 kW Machine weight: approx. 2700 kg Machine dimensions: approx. 2.5 x 2.5 x 2.2 m

Condition: excellent (used), Dust extraction Walther NOVA 2000 Bsdpfjivta Nex Abzolp with 2 extraction arms mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Stability and Operator Comfort Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Blodexr Rwbspfx Abzep Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross-ram): 1,500 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Bedpfxoq I Nlyj Abzolp Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical/horizontal change) Double-hinged chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Table size: 1100 x 250 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Blsdpfxexpfy Ej Abzjp Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Boxes, KLT inserts, and lids – continuous washing machine. Continuous flow washer for KLT containers, box washing system Automatic washer for KLT containers, tray washer, washer for various components - Washing - Rinsing - Oil removal - Drying - 2 lanes - 2 x 600 KLT/h - External heating system - Possible transport, dismantling, and loading Boxes, KLT inserts, and lids – continuous washing machine. Bledpfx Aswi Nl Isbzjp Maximum passage width: 300 mm Maximum passage height: 650 mm Contamination: dust, mineral grease, mineral oil, metal shavings System Description The system and piping are made of high-quality stainless steel, ensuring a long service life. The machine is a two-lane chain conveyor-type continuous washing system. Its unique modular design allows for future expansion of an existing system, ensuring that the installation will not become undersized as requirements increase. The system can be expanded along with operational or additional requirements. Hot water heating: Heat exchanger in the washing tanks connected to the heating circuit. Recommended supply temperature: 90°C Nozzle pipes: Screw-fitted Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks Item counter on both lanes System Features: • Stainless steel infeed module • Stainless steel washing module 1 • Stainless steel washing module 2 • Stainless steel cold air blow-off • Stainless steel warm air drying module • Stainless steel warm air drying module • Stainless steel outfeed module • Transport system • Drive with steplessly adjustable conveyor speed • Heating: Pipe heat exchanger in the washing tanks • Control cabinet with electric control • Access and cleaning doors on both sides of the system • Thermal insulation of the washing tanks and sound insulation on the fan units Technical Data: Overall dimensions: Length: 12,350 mm Width: 1,950 mm (2 lanes) Height: 2,800 mm (total height including fans) Electrical Power Requirement Washing pump 1: 7.50 kW Washing pump 2: 7.50 kW Cold air blow-off: 5.50 kW Warm air blow-off 1: 2x Warm air blow-off 2: 2x Warm air heating register: 4x Drive: 0.55 kW Fume extraction fan: 3.00 kW Voltage: 400 V Frequency: 50 Hz Protection class: IP 55 System control cabinet is installed next to the machine. The control cabinet contains all components necessary for system operation and monitoring. Device layout and cabling conform to applicable VDE regulations. The power supply cable to the control cabinet must have a minimum excess length of 2 meters. Emergency stop switches are installed in both the loading and unloading zones. A hot water supply of approx. 90°C is required for heating the washing tanks.

Condition: used, Condenser Guntner -Type: GVH 090.1B/2x4-S(D) -Cooling capacity: 477 kW / 399 kW Bedpfx Asxg Nhbobzolp -Number of fans: 8 x 900 mm -RPM: 440/350 -Dimensions: 9700 x 2290 x 1850 mm -Volume: 218 L -Quantity in stock: 1 -Stock number: SK 169 -Condition: Used in very good condition

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Very good condition, directly from production!!! Blodjiyyxcopfx Abzop

Condition: new, functionality: fully functional, power: 80.9 kW (109.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,000 kg, empty load weight: 8,000 kg, operation weight: 8,000 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 2,800 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Excavator Loader GG30BC Excavator Loader The GG30BC excavator loader is a robust and reliable machine designed for construction and industrial applications. With a loading capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, with a width of 2,200 mm and a capacity of 1.3 m³, ensures fast and effective loading. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). The mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, providing optimal control of the vehicle. The maximum travel speed is 24 km/h, enabling efficient transportation around the jobsite. Hydraulics and Brake System The advanced hydraulic system operates at a pressure of 22 MPa and delivers a digging force of 46.5 kN for the grab and 31 kN for the bucket. The standard digging depth is 4,000 mm, extendable to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic braking system including an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC provides a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. The maximum tractive force is 39 kN, and the breakout force is 38 kN. A minimum ground clearance of 300 mm ensures excellent performance on challenging terrain. The machine dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 Rated power: 81 kW (110 hp) Operating weight: 8,000 kg Loading capacity: 2,500 kg Transmission type: Mechanical transmission with fixed power drive Gears: 2 forward / 2 reverse Maximum speed: 24 km/h Tyres: (F) 14-17.5 (R) 19.5L-24 Steering brand: FEICHENG YUNYU Steering system working pressure: 12 Pa Front tyre pressure: 0.22 MPa Main transmission type: Reduction Final drive: Single-stage final reducer Brake system control: Pneumatic brake clamp over oil, external, self-regulating, self-balancing Bjdpfx Aoxr Ru Hebzelp Hydraulic system pressure: 22 MPa Digging force (grab): 46.5 kN Digging force (bucket): 31 kN Brake type: Self-levelling Emergency brake control: Manual – parking brake with end force Bucket capacity: 1.3 m³ Bucket width: 2,200 mm Dipper bucket capacity: 620 mm Loader dump height: 2,800 mm Loader dump reach: 1,062 mm Maximum digging depth: 4,000 mm Optional digging depth: 5,000–5,500 mm (with telescopic arm) Minimum turning radius: 6,581 mm Digging arm swing angle: 190° Maximum tractive force: 39 kN Breakout force: 38 kN Minimum ground clearance: 300 mm Wheelbase: 2,250 mm Steering angle: ±36° Working pressure: 12 MPa Length: 7,600 mm Width: 2,260 mm Height: 2,890 mm

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, table width: 800 mm, table length: 2,100 mm, table load: 2,000 kg, rotational speed (max.): 10,000 rpm, overall weight: 21,000 kg, coolant supply: 20 bar, spindle motor power: 30 W, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTRE HEIDENHAIN TNC 7 Basic HEIDENHAIN package (motors, measuring systems, and handwheel) Bledpfx Absfdxi Uozjp IKZ: Internal coolant supply – 20 bar Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with side-folding inspection windows Accuracies: Positioning accuracy: ±0.005 mm Repeat accuracy: ±0.003 mm Optionally, the L2000 machining centre can be equipped with an SK-50 spindle interface Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 345 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,750 rpm, spindle speed (min.): 50 rpm, table length: 1,370 mm, table width: 280 mm, overall weight: 1,500 kg, Spindle taper: ISO 40 RPM.: 50-3750 (trinløs). Travel: X800 Y345 Z400 mm. Table size: 1370 x 280 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 4 HP. Digital readout: Fagor, 3-axis Year: 2002 Country of origin: Spain. Size (L x W x H): 2000 x 2000 x 2350 mm. Blsdpfsxn R Tzsx Abzep Weight: 1500 kg. Travel ram: 570 mm. With stepless spindle speed, motorized tool clamping, pneumatic spindle brake, drilling function in head with automatic feed and misc. tools. All our machines are tested and serviced before delivery.

Condition: good (used), Trapezoidal taps Bodpfx Ajdx Uy Ijbzslp Diameter 40 mm Pitch 1/5 inch

Condition: used, Condenser Guntner -Type: GVH 082B/2x4 ND -Cooling capacity: 620/490 kW Bodoxg Na Dopfx Abzslp -Number of fans: 8 x 800 mm -RPM: 900/700 -Dimensions: 6980 x 2380 x 1880 mm -Quantity in stock: 1 -Stock number: SK 168 -Condition: Used in very good condition

Condition: excellent (used), The tilt scale is fully functional. Blsdpfx Abophph Iozsp The scope of delivery includes: 01x inclination scale, used Manufacturer: Rapido-Werke dim.: approx. 1.250 x 1.360 x 2.250 mm (WxDxH) maximum load: 750 Kg feet: 04x / height adjustable with tare compensation Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH INTEGRATED ROTARY TABLE Bjdpom Tv Iisfx Abzslp Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measurement systems, and handwheel) Integrated rotary table: Ø 1,000 mm ICS: Internal coolant supply - 36 bar Additional equipment: Standard tool changer with double gripper, 40 stations Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Peripheral enclosure Accuracies: Positioning accuracy: 0.015 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 35 rpm, overall weight: 2,600 kg, table length: 1,525 mm, table width: 325 mm, Spindle taper: ISO 50 RPM.: 35-1800 variable. Travel: X1050 Y330 Z475 mm. Table size: 1525 x 325 mm. Blsdjxn R Tnjpfx Abzjp Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5,5 kW. Digital readout: Fagor Innova (Z). Year: 2002 Country of origin: Spain. Size (L x W x H): 2400 x 2500 x 2200 mm. Weight: 2600 kg. Variable speed in 2 gears. All our machines are tested and serviced before delivery.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 CNC control system HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply – 36 bar Rotary Table: 1600 x 1200 mm – dual motor drive system Additional Equipment: Standard tool changer with double gripper, 40 stations Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Full perimeter enclosure Accuracies: Bedeff Hz Hjpfx Abzelp Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Controls and Motors: Bodpfx Abovrv Suozslp Two HEIDENHAIN TNC 640 digital CNC controls (one at the front of the machine, one at the rear in the cabin) HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Tool changer with double gripper, 60 positions Dual hinged belt chip conveyor (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will receive a response // Only inquiries from Germany will be processed

Condition: new, Year of construction: 2025, travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 620 mm, table length: 1,700 mm, table load: 1,300 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER Control and Drive System: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN package (Motors, Measuring Systems, Handwheel) ICS: Internal Coolant Supply – 20 bar Blsdewu Tcuopfx Abzop Additional Equipment: Preparation for 4th axis (rotary table) Full enclosure with side-mounted, fold-up inspection windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, Year of construction: 2025, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 600 mm, table length: 1,400 mm, table load: 800 kg, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FACTORY NEW MACHINING CENTER Control and Motors: HEIDENHAIN TNC 640 digital path control Blodpowu Tdrofx Abzsp HEIDENHAIN package (motors, measuring systems, handwheel) Additional Equipment: Preparation for 4th axis (rotary table) Full enclosure with side foldable viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be answered.