Used Grease for sale (523)

Condition: new, Harmonic 4B grease no. 2 is perfectly suited for exceptionally long service life and operation within a wide temperature range from -10°C to +70°C. For robots, gearboxes. Top-quality lubricating grease. Dcodpfx Aoxluyysfpsc

Condition: good (used), functionality: fully functional, input voltage: 400 V, total height: 1,600 mm, total length: 1,310 mm, total width: 5,400 mm, type of input current: three-phase, Fat frying system Reimelt EL 6/1000S-2 Fat fryer with decorating unit 1/1000 S for Spritzkuchen and donuts Turning device with automatic removal unit Temperature controller with safety thermostat Exhaust hood Stainless steel construction Connection: 400V, 63A-CEE plug Dimensions approx.: 5400 x 1310 x 1600 mm (W x D x H) Used machine Options: Maintenance contract Spare parts kit Truck delivery service Instruction & commissioning Dcedpeygdczefx Afpoc Visit us!

Condition: used, Part of Grease nippleapprox. 1,5t available Dcedpeglmt Ejfx Afpoc

Year of construction: 1989, condition: used, Technical details: Dsdpeu Nft Hjfx Afpocc Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Application: Pressing grease into grease nipples Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Condition: good (used), Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg Dcodpfxji Agxqo Afpsc

Condition: good (used), Lubricating bolts for rope pulleys, steel rope pulleys, rope deflection pulleys, crane ropes, four-rope multi-shell grabs, polyp grabs, mechanical multi-shell grabs, clamshell grabs, ship unloading grabs, scrap grabs, garbage grabs, rope grabs, digging grabs, bolts, crane bolts, lubricating bolts -Grease bolt: Crane bolt type 75x145 M48 -Shaft: Ø 59.6 mm -Number: 7 bolts available - Price: per piece - Dimensions: Ø 80 x 170 mm -Weight: 3.9 kg/pc. Djdpfx Afev Illcspecc

Condition: ready for operation (used), Vogel SKF piston pump KFG10-5W2-S1-486 grease/NLG12, max. 90-264 VAC 47-440Hz, 120-370 VDC, serial number: filled! - used, in good condition, 100% functional, delivery as per photos. Dedex Evbhjpfx Afpjcc

Condition: used, functionality: fully functional, Grease bag cleaner for sale. Dcjdpsxby Dcjfx Afpec

Year of construction: 2022, condition: new, SEMI-AUTOMATIC GREASEPROOF FERMENTER FOR 60 BERLINER/ DOUGHNUTS with GARBAGE RACK Completely made of stainless steel Semi-automatic turning device with miter cabinet and 10 tilting trays Dsdpfjd R T Uxjx Afpscc on rollers lateral drain for the grease Connection 16 Ah Power/voltage 10,4 Kw 400 v/ 50 Hz Dimensions 1243x1075x820 total length 2315 cm with side drain plate weight 220 kg Hourly output 600 doughnuts per hour Grease capacity 67 liters for further questions please call thank you

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, IFP - KP50HYBRID Metal Degreasing and Cleaning System HYBRID Technology: Solvent-based and aqueous component cleaning in a single system. Demonstration unit, year of manufacture: 2024 Condition: As new Technical specifications: • Usable solvents/cleaners: modified alcohol (Alll) + water with detergent • Basket dimensions (L x W x H): 480 x 320 x 200 mm • Maximum basket weight: 50 kg • Throughput: 3 - 8 batches/hour • Connected load: 30 kW • Energy consumption: 15 kWh • Compressed air: 6 bar • System dimensions (L x W x H): 3000 x 2000 x 3000 mm • System weight: 4,100 kg • System cooling: Air/water-cooled (customer-side chilled water supply required) System features: • Fully enclosed system design • Service doors Dsdpfx Asx Ivtpefpecc • Rotating and swiveling device • Front loading with safety glass door • 2 buffer tanks for solvent • 2 buffer tanks for water • Ultrasonic cleaning equipment • Process filtration • Fine filtration • Intensive vacuum drying • 12'' touch panel • Sliding table with two basket stations • Preservation unit • Online access for remote maintenance

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21224, 2-stage washing system with lifting door Dcedpfxex Hplve Afpoc Electrically heated, total approx. 50 kW Loading capacity: 1,000 kg Maximum part size: d=1,400 mm, h=800 mm All parameters adjustable Documentation and operating manual available

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, 2x degreasing, 2x rinsing, 1x residual water dryer, heating medium: natural gas, wastewater treatment unit, make Loft, burner, make Buderus, desalination unit, heat exchanger, switch and control cabinets, platform system, accessories Dcedpsx R D Ndofx Afpec +++ Attention: Machine is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, input voltage: 380 V, This is a cleaning/degreasing system with automatic loading. The components to be cleaned are automatically conveyed into the cleaning system in washing baskets (see photos). The system is fully functional and can be inspected during operation. Spare parts: The spare parts we have in stock for this system can be purchased additionally based on negotiation. Dcedpjyb R Rhjfx Afpjc

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 180100063, Fully functional parts degreasing unit. No known defects. The machine features a washing zone (high-pressure nozzles), a rinsing zone (high-pressure nozzles), and a hot air drying zone at the discharge. The machine could not be utilized as planned and is therefore offered for sale. Inspection is possible, but only with prior notice well in advance. All water tanks are drained and will need to be refilled for operational readiness. Please inquire only if seriously interested. Dcsdpfsx D U Nxjx Afpoc

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 1,000 h, Material to be cleaned: sheet steel strips. Dimensions of the material bandwidth max. 1,250 mm The machine can process sheets from 0.5mm to 5mm. Cleaning speed: max. 10 m/min Degree of oiling: slightly oiled (6bar dry and deoiled, approx. 11 m³/min Current 400V/50Hz; ~20kW Floor concrete for 10 N/mm² Flatness on target circle 5.0m +/-5mm Noise development ≤ 80 dB(A) Operating time max. 3 shift operation Dcedpfxeh Rvz So Afpec Environmentally friendly process without the use of chemicals

Condition: good (used), functionality: fully functional, machine/vehicle number: 5109 SP, This advanced degreasing system is engineered to deliver efficient and thorough cleaning of metal components. Metal baskets, manually loaded with parts, are guided through heated degreasing baths to ensure consistent and effective results. The installation operates with Cyclohexane (liquid, supplied by BASF) as the degreasing medium, guaranteeing both reliability and high-quality performance. Key features include: Dcjdpfxexawkke Afpjc - Precise Temperature Control: Baths are heated to the required operating temperature for optimal degreasing. - Triple Filtration System: Integrated filtration at 0.1 µm, 1 µm, and 10 µm ensures maximum fluid cleanliness and extended bath life. - Robust Design: Built for durability and consistent performance in industrial environments. - Dutch ATEX-Zone Certified: Fully compliant for safe operation in hazardous areas. This installation offers a proven solution for manufacturers seeking safe, efficient, and high-quality degreasing of metal components. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Year of construction: 2009, condition: good (used), Bous Waschfix WSA 70 T3 cleaning and degreasing system BOUS cleaning & degreasing plant Waschfix WSA 70 T3 Usable space: 700 mm filling quantity: 180l / 180l Temperature +70 / +70 °C heating: 12 / 6 kW suction: 0,25 kW drying: 5 kW Dsdpfx Aepq N I Defpjcc Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Special equipment: Ultrafine filter Drain pump Filter monitoring Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Bous Waschfix 70/T3 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix Dcodpopudubofx Afpsc 70/T3 WSA Special equipment: Ultrafine filter Drain pump Filter monitoring Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2014, condition: excellent (used), Bous Waschfix T6/70 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix T6 / 70 WSA Usable space: 700 mm filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW exhaust: 0,56 kW drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Special equipment: Ultrafine filter Dsdpjpuduxsfx Afpocc Drain pump Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) Dcsdpewqx H Rsfx Afpjc • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Year of construction: 2022, condition: new, New WRC, performance by black series Dcjdpfofm Urtjx Afpjc Combination of high -tech equipment with frequency contolled motors and movements. Main motor 30 kW or 37 kW or 45 kW Soft start & stop starting Boards pushing hand with adjustable hight & additional side holders Pressurized blade guidances with oil mist cooling Automatical oil and grease lubricating Tracking precutter Robust and raised rails with automatical waste cleaners All possible equipment for manipulating with log; movable logturners, patented fast log & prism turners, 2 levels of log grippers Separated self standing control panel with seat and 2 joystick controling. Price & Conditions

Condition: used, maximum load weight: 30,350 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2024, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer removable gooseneck and additional drive-over rear bogie First registration 06/2024 Mileage only 33,398 km Unladen weight: 14,650 kg Gross vehicle weight: 45,000 kg Gooseneck length: 3,070 mm Fifth wheel height: 1,200 to 1,280 mm Turning radius: 2,350 mm Low bed length: 6,800 mm Extension length: 5,700 mm Rear axle assembly length: 2,700 mm Bucket recess width: 700 mm Bucket recess depth: 550 mm Loading height low-bed: 300 mm Loading height above the running gear: 955 mm Trailer width: 2,550 mm Hydraulic suspension -70 / +530 mm Technical fifth wheel load: 21,000 kg Dedpfsx E Ixlex Afpscc Axle load: 24,000 kg Removable gooseneck with external main frame Trailer paintwork: 3-coat system incl. spray galvanization DOLL Tronic CAN-Bus system Low-bed floor: 45 mm spruce planks between flatbed frames 24-volt electric hydraulics Trailer functions controlled via DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO CONTROL EEG electronic straight tracking assistance Rear: aluminum folding ramps with lifting device, length 2,100 mm, width 600 mm, mechanical width adjustment, load capacity 20,000 kg Load securing in the low-bed: 7 pairs of swiveling lashing rings with 13,400 daN lashing force 5 pairs of stakes pockets in the outer frame 3 pairs of M36 threads on the outside for screwing in lashing brackets Chassis: DOLL tera pendulum axles with hydraulically suspended BPW axles All axles hydraulically forced-steered, with up to 60° steering angle at the rearmost axle All grease points connected to centralized lubrication system (ZSA) WABCO Trailer EBS with ABS and RSS Air tanks: aluminum BEKA-MAX central lubrication system front and rear bogie Oversize load package with folding deck wideners (2x 225 mm), extendable warning sign package up to 3,200 mm width Tyres: 8 x 245/70 R 17.5 RENTING is the new BUYING, available immediately from us with full-service rental-----

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring Djdpfx Afow Eb Itspecc - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: good (used), Year of construction: 2011, AKL, TGW with 3 Mustang stacker cranes, 22,756 storage locations, container size 60 x 40 x 35 cm – used - : Price ex location: only €99,500 (net), plus dismantling and additional costs! Manufacturer: TGW Type: AKL Year of construction: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 units Aisles: 3 System dimensions (L x W x H): 64 x 13 x 7.90 m Storage locations: 22,756 Payload: 50 kg per container Load units (max. dimensions): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan available as DWG file – further technical documentation also available Mustang Stacker Crane Base unit: The single-mast Mustang stacker crane is designed for automated storage and retrieval of containers in a high-bay or flow-through warehouse. This storage system can also be utilized for supplying workstations on assembly lines. Device type combination Mustang_L HS 7.8m & 1 KTC (6x4 2L 2x50kg) // Mustang_L HS & KTC (6x TGW Total weight (incl. payload): 1,665 kg Lifting load total (incl. payload): 396 kg Payload (incl. load handling device): 100 kg Travel speed in x: 4.80 m/s Travel acceleration in x: 2.80 m/s² Travel deceleration in x: 2.80 m/s² End positioning time in x: 1.5 s Lifting speed in y: 3.00 m/s Lifting acceleration in y: 3.00 m/s² Lifting deceleration in y: 3.00 m/s² End positioning time in y: 0.5 s Dwell time: 1.0 s Theoretical operating cycle time: 56.2 s Crane cycles: 58 per hour Conveyed and stored goods FLG 2: Load handling devices (LHM): Plastic trays, occasionally loaded with cartons or containers Dimensions L x W x H: 600 mm x 400 mm x 350 mm Possible overhangs included: max. 5 mm Total weight: min. 2 kg / max. 50 kg per LHM Load: plastic parts Dcedpfxoyhxm Is Afpoc Special features: Load handling devices have a flat, smooth, dry, oil- and grease-free bottom. The maximum deflection at total weight as stated is 5 mm. These carriers are placed on only 3 levels. Equipment performance Stacker crane: 122 putaway and retrieval cycles per hour in double cycle mode, including 61 relocations in accordance with FEM 9.851 Lifter: 210 containers/hour from top to bottom and 210 from bottom to top Availability: The guaranteed system availability after successful commissioning is 98%, in accordance with FEM 9221 and 9222.

Condition: used, Year of construction: 2011, EMCO Hyperturn 45 – CNC Turning Machine - Siemens SINUMERIK CNC control system - Main spindle equipped with a full clamping cylinder (operation with bar feeder not possible; loading and unloading via automatic swing loader, see video) - Year of manufacture: 2011 Technical Data Working Area: - Maximum swing diameter over bed: 430 mm - Swing diameter over cross slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar capacity: 45 mm - Distance between main and counter spindle (spindle noses): 720 mm Slide Travel Range: - Slide travel X / X2: 160 / 150 mm - Slide travel Z / Z2 / Z3: 510 / 510 / 510 mm Main Spindle (Spindle 1): Dedpfeyglx Rsx Afpjcc - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² Main Spindle Clamping System: - Hollow clamping cylinder (hydraulic) with draw tube, max. bar passage: 45 mm - Max. standard chuck size: 160 mm Main Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm Counter Spindle (Spindle 2): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Z3 travel: 510 mm - Traverse speed: 45 m/min - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² - Counter spindle clamping system: hollow clamping cylinder with draw tube and integrated pneumatic parts ejector - Max. chuck size: 160 mm Counter Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm C Axes (Spindles 1 and 2): - Circular axis resolution: 0.001° - Rapid traverse speed: 1000 / 100 rpm - Spindle indexing (disc brake): 0.01° Feed Drives: - Rapid traverse X / Z: 30 / 45 m/min - Feed force X: 4,000 N - Feed force Z / Z2 / Z3: 5,000 / 5,000 / 6,000 N - Position scatter width Ps per VDI 3441 in X / Y / Z: 3 / 3 / 3 µm Turrets 1 and 2 (upper and lower system): - Radial tool turret with directional logic and driven tools - Number of tool stations per turret: 12 - Tool holders according to DIN 69880: VDI 25 - Tool cross-section (square tools): 16 × 16 mm - Boring bar shank diameter: 25 mm - Turret indexing time: 0.2 s Driven Tool Stations (coupling according to DIN 5480): - Number of driven tool stations per turret: 12 - Speed range: 0 – 6,000 rpm - Maximum drive power: 4 kW - Maximum torque: 16 Nm - Maximum duty cycle at maximum speed or power: 25% Lubrication System: - Guideways, ball screws: automatic central oil lubrication - Main spindle, counter spindle: grease lubrication Chip Conveyor: - Hinged belt conveyor, discharge height: 1,200 mm Electrical Connection: - Power supply: 400 V ~3/PE - Machine connected load: 30 kVA - Max. main fuse for the machine: 80 A - Required short-circuit power: 2,500 kVA Dimensions / Weights: - Height of spindle axis above floor: 1,126 mm - Overall height (incl. oil mist separator): 2,325 mm - Footprint (incl. chip conveyor, without cooling unit): 3,830 × 1,950 mm - Net weight of the machine without chip conveyor: 4,200 kg Sound Pressure Level: - Average sound pressure level: 78 dB(A)