Used Haas Vf-2Ss for sale (10)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HAAS control (LCD screen, intuitive programming) Table size 914 x 356 mm Table load capacity 680 kgs X-axis travel 762 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 12000 rpm Rapid traverse X/Y/Z = 35,6 m/min Tool magazine 24+1 positions (arm type) Spindle power 22.4 kW Spindle taper SK40 Machine weight approx. 3 630 kg Dimensions (L x W x H): 2 500 x 2 400 x 2 600 mm Accessories, equipment - Electric MPG - Coolant system - Internal coolant supply - Chip auger - RENISHAW infrared tool measuring system with probe - 4th axis preparation Djdpfsy Ifbcsx Aa Njut - Power failure detection - Machine manuals - Machine mounts The machine is in very good condition and still powered on. It was purchased as a new machine in Hungary. It was used in clean and professional environment.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,236 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF-2SS was manufactured in 2011. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a table size of 914 x 356 mm and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 914 x 356 mm (36 x 14 in) • Rapids (X/Y/Z): 35.6 m/min (1,400 ipm) • Tool changer capacity: 24+1 • Coolant system: 40 bar high-pressure Additional equipment • Table probe Dusdpfx Aoy Nzq Aea Njt • Spindle probe • 4th axis (rotary) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,327 h, travel distance X-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details. • IKZ • Probe • Tool measuring • Axis configuration: 3 axes (X/Y/Z) • Frequency: 50 / 60 Hz • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Arc flash rating: • 208-240 VAC models: HRC-1 • 360-480 VAC models: HRC-2 Duodpfeyux Saox Aa Njt • Feed cutting time: 5327 h

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Duedjyq Ipgspfx Aa Nst

Condition: ready for operation (used), Year of construction: 2018, General Data Duodpfx Asx D D N Ija Njt Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Dimensions Machine Length 2700 mm Table Table load 680 kg Movement X-Axis Movement 762 mm Z-Axis Movement 508 mm Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC HAAS VF-2SS 2011 2 units CNC HAAS VF-2SS Duedpfxoyh Rwxo Aa Nst 2011 Fully functional

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm Dedpfxew Axkye Aa Neut EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 4 axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Duodpfx Aaeyaix Ue Nst Standard equipment • 12,000 rpm spindle • High-speed 30+1 side-mount tool changer • Window air blast • 55-gallon coolant tank • Control system (Haas Control) • Ethernet interface • WiFi connection • Power failure detection module • Advanced tool management • Media display (M130) • HaasConnect (remote monitoring) • Safe Run • HaasDrop • Rigid tapping • Standard program memory (1 GB) • Stainless steel way covers • Phone charging station Included equipment • 4th + 5th axis preparation (pre-wiring) • High-speed machining option • Export packaging • Rotary table HRT210 • Direct control by mill CNC • Programmable coolant pump • Chip auger • Chip tray filter kit • Through-spindle coolant (300 psi / 21 bar)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Dusdpfxox Up Dho Aa Njt Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power on time: 1,056 h Dujdpfeywv Tnox Aa Njt • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Additional equipment • Machine vise • Touch probe Technical Specification Taper Size SK 40