Used Haas Dt 1 for sale (224)

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 508 x 406 x 394mm, Bsdpfxj Agn I Dj Ac Djww Table 660 x 381mm, Spindle taper BT30, 11.2kW Spindle Motor giving 15,000rpm, HAAS Control, 20 Station ATC, Coolant.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Bjdpfx Acjzwxz Es Djww Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2020, operating hours: 6,403 h, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 35 kVA, controller model: Haas NGC-Steuerung, total height: 3,300 mm, total length: 7,400 mm, total width: 2,600 mm, table load: 1,814 kg, overall weight: 13,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 51, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, HAAS VF-10/40 – CNC Vertical Machining Center – Year of Manufacture 2020 High-performance CNC vertical machining center with a large work area, a 15,000 RPM high-speed spindle, and a side-mounted tool changer with 50+1 magazine positions. The machine features a modern HAAS NGC control system with numerous activated functions, including high-speed machining, macro programming, rigid tapping, and rotation/scaling. Technical Data: • Manufacturer: HAAS • Model: VF-10/40 • Year of Manufacture: 2020 • Control System: HAAS NGC (Next Generation Control) • X-axis Travel: 3,048 mm • Y-axis Travel: 813 mm • Z-axis Travel: 762 mm • Table Size: 3,048 × 711 mm Bodpfx Ae Ahyvysc Djww • Maximum Table Load: 1,814 kg • T-slots: 5 × 16 mm • Spindle Speed: 15,000 RPM • Spindle Power: 22.4 kW • Tool Holder: BT40 • Tool Magazine: 50+1 positions • Tool Changer: Side-mounted tool changer • Coolant Tank: 360 liters • Through-spindle coolant (TSC): Activated via control system • Power Supply: 400 V / 50 Hz / 3 phases • Machine Weight: approx. 13,654 kg • Shipping Dimensions (L × W × H): approx. 7,320 × 2,600 × 3,380 mm Control System and Equipment: • HAAS CNC control system with widescreen monitor • High-speed machining • Macro programming • VPS – Visual Programming System • Rotation and scaling • Rigid tapping • M19 spindle orientation • Fourth axis activated via control system • Coolant supply through the spindle activated via control system • Extended program memory: 1 GB • Correction tables • Media display Operating Hours (as of October 30, 2026): • Power-on hours: 15,717 h • Cycle start hours: 6,403 h • Feed hours: 3,735 h • Tool changes: 127,433 • Spindle hours: Not listed separately Technical specifications based on available information and control system photos. Model designation and individual equipment features subject to confirmation. Errors, changes, and prior sale are subject to change.

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm Bwsdpfx Aez Sy I Iec Dow - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Bedpfx Acozu Nphe Doww Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Bwodoywgaxjpfx Ac Dew Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: excellent (used), Year of construction: 2019, HAAS ST-15 cnc lathe Year: 2019 Chuck Size 210 mm Max Part Swing 419 mm Max Cutting Diameter (with BOT turret) 305 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 64 mm Travels specifications Travels X Axis 200 mm Z Axis 406 m Rapids on X 30.5 m/min Rapids on Z 30.5 m/min Spindle Nose A2-6 Max Rating 15 kW Max Speed 4000 rpm Max Torque 203.0 Nm 500 rpm Spindle Bore ø 88.9 mm Tailstock taper MT3 Hydraulic Quill Travel 95 mm Manual Body Positioning 508 mm Weight 3600 kg Bwsdpfxjz Tlafo Ac Djw Accessories/options: - Renishaw tool measuring arm - Foot pedals - Tool holders - Spare parts Under power test is available at anytime!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Maximum turning diameter: 305 mm Reblezr E H Djvzwyrecf Maximum turning length: 406 mm Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Bodpfxjzr E H Ds Ac Dsww Dimensions (L x W x H): 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine type Travel distance X Horizontal CNC machining center 1,626 mm* Travel distance Y Travel distance Z 1,270 mm* 1,016 mm* Table size Max. table load approx. 1,626 × 914 mm* up to approx. 4,536 kg, evenly distributed* Spindle drive Tool holder Geared spindle; 7,500 rpm SK 50 Tool magazine Cooling through the spindle (internal coolant) 30 tools Available Measuring probe Axis equipment Available 4th axis or preparation for 4th/5th axis Control Older Haas control Previous approximate value approx. 16 t Bsdpfx Acs Aa Npij Doww

Condition: excellent (used), Year of construction: 2017, Haas ST 15 Year of manufacture: 2017 RPM: 3500 Tool setter Tailstock Chip conveyor Video available! Bwjdpfx Asz I Ryloc Dsw

Condition: ready for operation (used), Year of construction: 2018, table load: 227 kg, number of axes: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max part swing: 787 mm • Standard T-slots: 6 @ 60° • Max rotation speed: 50°/secB Axis (Tilting) • Backlash: 30 arc-sec • Ratio: 3:1 • Max speed: 50°/sec • Max runout: 0.025 mm • Travel range: ±120° Bwjdpfx Asx D I H Rec Dsw • Resolution: 0.001°A Axis (Rotary) • Accuracy: ±15 arc-sec • Repeatability: 10 arc-sec • Max rotation: 999.999° (with rotary control) • Resolution: 0.001°

Condition: repair required (used), functionality: unexamined, machine/vehicle number: 901014, total height: 350 mm, total width: 400 mm, total length: 1,000 mm, overall weight: 250 kg, 5-axis rotary table HAAS TR160-H Bodpj Ahpl Eefx Ac Doww We have noticed that the table is losing air pressure. The table always blows some air for the clamping function, but it blows too much. It could be a valve, which we have already ordered, but it could also have another defect. Otherwise, the table functions properly. We have occasionally used the table as a positioning axis. For sale due to business closure. Videos of the positioning process, etc., can be created via WhatsApp.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 4,000 h, Equipment: chip conveyor, HAAS ST-10 We are selling some machines as we are acquiring new ones. The machine is in excellent condition and currently in use. Spindle speed range: 6000 rpm Bjdpfx Asyrc Dzoc Deww Number of tool slots: 12 Chip conveyor

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 330 mm, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, tool weight: 2,000 g, number of axes: 3, This 3-axis HAAS DC-1 was manufactured in 2024. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 330 mm. The machine includes a robust table size of 700 x 420 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the HAAS DC-1 vertical machining centre we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Spindle nose to table: max 18.9 in / 480 mm; min 5.9 in / 150 mm • Spindle: max torque 14.0 ft-lbf @ 2500 rpm / 19.0 Nm @ 2500 rpm; inline direct-drive; taper BT30; grease-packed bearings; liquid-cooled • Table: 27.6 in / 700 mm (L) x 16.5 in / 420 mm (W); T-slot width 0.550 in / 14 mm; T-slot center distance 4.92 in / 125 mm; 3 T-slots; max load 550 lb / 250 kg (evenly distributed) • Feedrates: max cutting 1200 ipm / 30.5 m/min; rapid (X/Y/Z) 1890 ipm / 48.0 m/min • Max thrust (X/Y/Z): 2054 lbf / 9137 N • Tool changer: turret; capacity 21; max tool dia (full) 2.4 in / 60 mm; max tool dia (adjacent empty) 3.1 in / 80 mm; max tool length 7.90 in / 200 mm; tool-to-tool 1.50 s; chip-to-chip 2.50 s • Max tapping speed: 5000 rpm Bjdez Nytfjpfx Ac Doww • Coolant capacity: 40 gal / 151 L • Air: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar; inline air hose 3/8 in; air coupler 3/8 in; min pressure 80 psi / 5.5 bar • Power: 3-phase 220 VAC (FLA 40 A) or 440 VAC (FLA 20 A) • Shipping: 100.0 in x 79.0 in x 100.0 in / 254 cm x 201 cm x 254 cm; weight 7040 lb / 3402.0 kg Additional equipment • CW-5200 industrial chiller • Chip conveyor Technical Specification Taper Size BT 30

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, Bwodpfjzg Edljx Ac Dow maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm X axis traverse 762mm Y axis traverse 406mm Bwjds Ahw Rzepfx Ac Djw Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Swarf auger Coolant system Lighting Guarding

Condition: good (used), Year of construction: 2010, CNC lathe, Haas brand, GT-10 model, year 2010. Bwedpfxoz D D I Us Ac Dsw

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us. Bjdpfxez R Rf Aj Ac Dsww

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled Bwjdpfx Acjz Nxwis Dsw • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm Bwsdpfxowvf The Ac Djw X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2006, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS - 840 D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bwedpfx Acemd Didj Dow #Tags: AF 1 | AF-1

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Bjdpfx Aox U D Etoc Dsww Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: used, total length: 3,700 mm, total width: 2,150 mm, total height: 2,400 mm, Year of manufacture: 2004 Colour: White Empty weight: 5.000 kg Price: On request - Year: 2004 Bedpfxe Ahxl Ho Ac Doww - Documentation available: Yes - CE marking present: Yes - Serial number: 68517 - Drive system: CNC - Control system brand: Haas - Power [kW]: 22.4 - Centre height [mm]: 254 - Swing over bed [mm]: 533 - Distance between centres [mm]: 991 - Spindle bore [mm]: 89 - Min. spindle speed [rpm]: 0 - Max. spindle speed [rpm]: 3400 - Options: Tool magazine - └ Tool magazine [pcs.]: 12 - X-axis travel [mm]: 287 - Z-axis travel [mm]: 864 - Transport dimensions: 3700mm x 2150mm x 2400mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements Bodpfx Acjzh Hlao Deww • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Bedpfx Aezxhmtjc Doww Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter