Used Scrapers for sale (641)

Condition: used, Year of construction: 1988, operating hours: 6,422 h, 1988 | Caterpillar 613C | Used Scraper | 6422 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Dedjzzz T Eopfx Aizjcp 👷‍♂️ Inspected by an independent expert 48 inspection points 38 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Immediately ready for use, with excellent starting and engine behavior. The machine runs very well overall; a minor leak was detected in the rotary drive of the shield - typical for devices of this construction year. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41097 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, operating hours: 9,908 h, 2007 | Caterpillar 621G | Used Scraper | 9908 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 151000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 49 inspection points 42 approved ✅ 5 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Dcsdpfsz Itppjx Aizop Good general condition. The wheels show significant wear, especially the rear left wheel. The loading blade also shows wear. The lower and outer walls have been reinforced with wear plates and welds, the right leveling cylinder has a leak. The body elements show some impact scratches and damaged paint. Also presence of oxidation. The various axles have play. The seat back is damaged as well as the cabin floor. Some of the blade travel rollers are stuck. Air leak in the rear braking system. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41301 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2011, operating hours: 9,662 h, 2011 | Caterpillar 621G | Used Scraper | 9662 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 209000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 47 inspection points 34 approved ✅ 12 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The tire wear is significant. Impact on the right rear rim. The hood cylinder, right side of the engine damaged. Impact and deformation at different places on the body. Three windows are cracked. The horn does not work. The reverse beep does not work. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41300 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Dcjdpfsz Itp Asx Aizsp

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts Dedpfx Aozhbf Isizjcp * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: used, Year of construction: 2011, operating hours: 11,525 h, 2011 | Caterpillar 621G | Used Scraper | 11525 hours 📍Location: France Djdpfx Aijz Itqajzjcp 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 199900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 46 inspection points 36 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The plate keeps the rod of the cylinder from pushing the blade and tearing off welding, damaged and existing repair. Tire wear is significant. The rear ramp has been deformed and repaired presence of welding. The upper part of the push blade is deformed repairs have been made. The rear mudguards have also been repaired by welding. Access steps have been replaced with chains. Presence of oil under engine block. Multiple impacts, scratches, and oxidation on the bodywork. Absence of the right mirror. Seat backrest damaged. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41299 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Dcodpozp Nycefx Aizep Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Trough inner width 600 mm. Drive via geared motor with 4.0 kW. Dodpfx Aiszn N Udezecp

Year of construction: 2026, condition: like new (used), Scraper chain conveyor robust and wear-resistant design optional: bar magnet separator Dcodpfoztzgcjx Aizop please specify when requesting a quote: conveyor capacity m³/h dimensions

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Dcedpfxjzn N Tyo Aizjp With 2 sections. See PDF file for sketch. Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Year of construction: 2011, condition: used, functionality: unexamined, Scraper conveyor for sale. The conveyor consists of two sections – a horizontal and an inclined part. Length of the horizontal section: 6,870 mm, length of the inclined section: 5,120 mm, outer width: 1,580 mm, outer height: 1,780 mm, inner width: 1,270 mm, inner height: 1,090 mm, drive motor: 5.5 kW, slat pitch: approx. 280 mm. The conveyor is dismantled and ready for transport. The machine can be inspected at: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Dcsdpewxb Tpjfx Aizsp

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 3,547 mm, total height: 2,163 mm, total width: 260 mm, conveyor belt width: 260 mm, delivery head: 1,700 mm, ejection height: 1,700 mm, conveying length: 3,567 mm, transport height: 1,700 mm, Magnetic scraper conveyors with a conveying capacity of up to 60 kg/h, drive motor 0.4 kW. Dcjdpfozwpnvjx Aizjp Both conveyors were only used for a short period, less than 100 operating hours. They can be delivered individually or as a package with a suitable chip centrifuge, which was also only used for a short period.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 25-TAPE CORE WINDING MACHINE WITH MULTI-BLADE CUTTING SYSTEM Structural description: The 25-tape core winding machine for producing paper tubes consists of the following components: Unwinder – made of shaped tubes protected with anti-corrosion powder coating. The unwinder has the ability to move on adjustable swivel wheels controlled from the operator panel. Dcedpfxj Ah Ex Nj Aizjp Cascade adhesive applicator with pneumatic brakes, scrapers, and adhesive heater, distinguished by the ability to adjust tape guiding, braking, and adhesive film thickness. Adhesive supply is controlled by a membrane pump, and the entire system is controlled by a computer managing the operation. Forming section – consists of a steel body protected with powder coating, inside which the control system is located, a swivel arm with drums driven by 3 roller gearboxes with a total power of 3 x 15 kW. The drive arm has a reading of the swivel angle and longitudinal position, as well as a pneumatic belt tensioning system. The body has a replaceable "cold" mandrel for forming the cores with a standardized socket, and a guide tube with a counter-knife. Multi-blade cutting system – the cutting system body is a separate part of the core winding machine. Linear guides for the movement of the cutting unit are mounted on the body. Inside the body, the following drives are mounted: - servo drive for driving the circular knives of the cutting system - servo drive with planetary gearbox for moving the cutting unit - servo drive for retracting the counter-knife - servo drive for lowering the knife bar with 5 cutting modules. Coil width from 50 to 120 mm Coil diameter Dz = Ø 76 mm, Dz. Max. 1500 mm Coil loading: Electric winch Min. max. internal diameter of cores 38 mm / 250 mm Cutting performance for cores: Ø 50 mm, L= 100 mm, thickness 8 mm 160 pcs./min. / 9,600 pcs./h, 67,200 pcs. / 7h Lease transfer.

Condition: used, Year of construction: 2011, functionality: unexamined, For sale: Scraper conveyor (Redler). The conveyor was used to transport pellets from two granulators to a bucket elevator. Capacity approx. 8 t/h. Length: 13,300 mm, External width: 670 mm, External height: 750 mm, Bar width: 295 mm, Drive motor: 1.5 kW, Bar spacing: approx. 345 mm. The conveyor is dismantled and ready for transport. Dcodpfx Aijwz I Uljzsp The machine can be inspected in Sępólno Krajeńskie, Kujawsko-Pomorskie Province, Poland.

Condition: used, LÁNG Scraped Surface Heat Exchanger with Electric Motor Drive, Rotary Heat Exchanger, Scraper Blade Heat Exchanger, Used Equipment Dodpfx Ae Afunujizscp Manufacturer: LÁNG Engineering Works Co., Budapest, Hungary Type / Professional Term: Scraped Surface Heat Exchanger / Scraped Wall Heat Exchanger Serial No.: 11423 Year of Manufacture: 1980 Overall Dimensions (Width x Depth x Height): 2480 x 600 x 1300 mm Weight: 354 kg Heating Space / Jacket Working Pressure: 3 kp/cm² Heating Space / Jacket Testing Pressure: 4 kp/cm² Liquid Space / Process Fluid Zone Working Pressure: 5 kp/cm² Liquid Space / Process Fluid Zone Testing Pressure: 6 kp/cm² Internal Structural Elements and Drive: Scraper Blade Screw / Scraper Augering Element Drive: Electric motor drive with V-belt transmission

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Djdjygx Hnopfx Aizscp Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Scraper conveyor Dcsdsz An Swopfx Aizop Length: 14 m Width: 45 cm Electric motor included

Condition: used, Scraper coveyor Lenght: 15,8 m Width: 45 cm Electric motor included Dodsz Ap H Aspfx Aizocp

Condition: used, Scraper conveyor Length: 21.7 m Width: 45 cm Dcsdoz An U Sopfx Aizep Electric motor included

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 10,570 h, power: 15 kW (20.39 HP), type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total length: 5,860 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, Industrial BRANDT KDF 550C edgebander for sale, designed for the production of cabinet furniture. A reliable, industrial-grade model featuring a pressure belt; suitable for both: small workshops and larger-scale production. Features and Equipment: Automatic edge feeding Gluing unit (for EVA glue) Front and rear end-trimming saws Top and bottom milling units Corner rounding (two units – for faster processing) Scrapers Dedpfx Aijz Smxuozscp Buffing/polishing unit Edge thickness: ~0.4–3 mm Panel thickness: up to ~50 mm Sprayers. Condition: Used, fully functional machine. Currently still in operation at a furniture workshop and available for inspection. Regularly maintained by UAB Lintera. We are the second owners—a small company. The machine has not been used for third-party contract work; it has been used exclusively for our own furniture production, operating on a single-shift basis. Price not includes VAT.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. For further information, see the rating plate. Djdpfxev Tb A Io Aizecp

Condition: new, Year of construction: 2021, protection type (IP code): IP54, type of cooling: air, Specification: Cross feeding chain conveyor; Inclined separator, reversible; Dcjde Afxc Aspfx Aizjp Longitudinal chain conveyor, reversible incl; Itsbkuow Uqqnor Ivfjn Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation.

Condition: used, New: Yes Year of construction: 2024 Dcjdpo Af R Rqofx Aizep Applicable material: Manure

Condition: used, Year of construction: 2018 Applicable material: Manure Dedps Af Unkjfx Aizocp

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Large bale infeed hopper. Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. The UC 120 B was manufactured in 2010 and completely overhauled in 2025. The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Plus costs for dismantling and transport. Dodpfjz A R I Sex Aizecp

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. Dcedpszqz Hwofx Aizjp * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).