Used Ham Mold for sale (2,790)

Condition: excellent (used), Year of construction: 2007, Mold Masters Hotrunner external 3 zones Hotrunner TMXL-3/3-0 We have available 7 units Cgsdpfx Aovax Izobcon

Condition: excellent (used), Year of construction: 2004, Hotrunner external 3 zones/ possible 6 zones Csdjuykpujpfx Abcogn

Condition: used, Pujolas Ham Press Csdpfx Ajwd Nufobcogn Model PF 4004

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Cgodpoycqc Tjfx Abcen Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter Cedpfx Aoyf Hfpebcogn KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: repair required (used), Year of construction: 1990, Technical details Clamping unit Clamping force: 850 kN Max. mould opening force: 37 kN Size of mould platens (W x H): 490 mm x 490 mm Distance between tie bars (W x H): 320 mm x 320 mm Mould opening stroke: 375 mm Minimum mould height: 250 mm Max daylight: 625 mm Screw diameter: 45 mm Shot weight, PS: 214 g Injection rate: 180 ccm/s Injection stroke: 150 mm Screw speed: 52 m/sec Nominal capacity of pump motor: 15 kW Installed heating capacity: 5.5 kW Cgjdpfxsyhbvbo Abcjn Additional information The machine will not start due to a program error! Currently not operational!!

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Csdpfxoyhbt Hj Abcsgn Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2017, machine/vehicle number: SO133, Technical Specifications & Performance Data This SIPA SFR EVO3 is a rotary stretch blow molding machine designed for high-efficiency PET bottle production in modern beverage operations. As a robust second hand asset for industrial packaging, it delivers reliable output for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a broad range of bottle sizes commonly used across water and soft drink applications. Manufacturer: SIPA Model: SFR EVO3 Year of manufacture: 2017 Cjdpoyhbihjfx Abcsgn Production speed: up to 18,000 bottles per hour No. of cavities: 8 Neck finish: PCO 28-1810 Bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formats Container type: Designed for PET bottle handling Bottle diameter (min–max, diagonal): 50–125 mm Bottle height (min–max, without neck): 80–349 mm Advanced Automation & Control Systems Engineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing sequences. Operator-friendly HMI and PLC-based control help streamline recipe management, process monitoring, and format changes. The machine architecture prioritizes repeatability of pre-blow and blow phases, promoting stable bottle quality across high-speed runs. Automated process control with user-oriented HMI Efficient preform heating for uniform material distribution Quick-change features to support format adjustments Safety-interlocked guards and emergency stop circuitry for operator protection Production Line Integration Capabilities This blow molder integrates seamlessly into used bottling line configurations for PET, whether operated as a standalone unit upstream of a filler or synchronized within a complete beverage production line. The included preform feeding and preform cooling systems facilitate smooth infeed and stable production conditions, enhancing overall line efficiency. Inline or standalone operation with standard conveyor interfaces Compatible with downstream filling, capping, and labeling equipment Flexible handling across 0.5L, 1.0L, and 1.5L bottle formats Suitable for modernization or capacity upgrades in second hand packaging machinery setups Machine Condition & Maintenance History The machine is currently working, indicating operational readiness within an active environment. Built in 2017, it offers a modern platform for operators seeking dependable performance and repeatable quality in PET bottle production. Its status as a functional, second hand unit makes it a strong candidate for rapid deployment in industrial packaging lines. Operational Performance & Versatility With 8 cavities and up to 18,000 bph output, the SFR EVO3 balances speed and quality for high-demand beverage production. The PCO 28-1810 neck standard supports widespread closure compatibility, simplifying cap sourcing and line interoperability. The preform feeding system and preform cooling system help stabilize process conditions, enabling uniform bottle perform...

Condition: used, Year of construction: 2010, operating hours: 39,000 h, machine/vehicle number: SO134, Technical Specifications & Performance Data This Nissei ASB ASB-50MB is a one-stage biaxial orientation stretch blow molding machine designed for precision PET bottle production. As a compact rotary indexing platform, it integrates injection and blow molding in a single cycle, ensuring excellent neck finish accuracy and consistent wall distribution. This second hand machine offers reliable output for beverage production and industrial packaging projects seeking a proven, cost-effective solution. Manufacturer: Nissei ASB engineering Model: ASB-50MB Manufacturing year: 2010 Process: One-stage ISBM (injection-stretch-blow) Production speed: approx. 1000 bph with 4 cavities Cavities: current setup 4 (machine supports 1–6 cavities depending on article) Bottle formats: 40 ml to 750 ml Container type: PET bottles Electrical data (plate): 400 V AC heater, 6.1 kW; motor 380 V AC 18.5 kW and 200 V AC 0.75 kW; 50 Hz Installed power (approx.): 25.35 kW Advanced Automation & Control Systems The ASB-50MB platform offers stable, repeatable operation with synchronized control of injection, conditioning, stretching, and blowing stations. Its rotary indexing table ensures precise timing between stages, supporting high-quality bottle formation in a compact footprint. Operator interfaces facilitate routine adjustments and process monitoring, while integrated heating controls deliver accurate temperature profiles for consistent preform conditioning. Rotary indexing one-stage machine with coordinated station control Dedicated heater power section for precise thermal management Structured electrical supply at 50 Hz for stable operation Designed for quick mold and format changeovers within the compatible size range Cedpfx Aboyhbf Aecjgn Integrated protections and interlocks for safe machine access Production Line Integration Capabilities This blow molding machine integrates seamlessly within a used bottling line or as a standalone PET container production unit. Its output can feed conveyors to downstream rinsing, filling, capping, and labeling equipment in beverage production and other industrial packaging applications. Standalone or inline configuration with downstream bottling equipment Compatible with standard conveyor interfaces Format flexibility for 0.04L to 0.75L PET bottles Suitable for water, juice, CSD, and other PET applications when paired with appropriate downstream systems Machine Condition & Maintenance History This second hand ASB-50MB is in good working condition and ready for operation. The machine shows approximately 39,000 operating hours, consistent with typical industrial usage while retaining solid performance potential for new production environments. Operational status: ready for operation Operating hours: approx. 39,000 Well-maintained example from a proven ISBM series Operational Performance & Versatility Known for robust build quality, the ASB-50MB delivers precise neck geometry and excellent clarity through controlled stretch ratios. The one-stage pr...

Condition: used, Year of construction: 2006, operating hours: 33,000 h, machine/vehicle number: SO135, Technical Specifications & Performance Data This one-stage biaxial orientation stretch blow molding machine delivers consistent PET bottle production with reliable throughput and compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB combines injection, conditioning, and blow molding in a single machine, reducing handling and improving quality control for a second hand or used bottling line seeking dependable PET bottle supply. Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB) Model: ASB-50 MB Machine type: One-stage biaxial orientation stretch blow molding machine Cgjdpjyhbfiefx Abcjn Year: 2006 Production speed: ~1,000 bottles/hour with 4-cavity mold Cavities: Configurable 1–6; supplied in 4-cavity configuration Formats: 40 ml to 750 ml (typical PET bottle sizes within this range) Containers: PET bottles Electrical supply: 400 VAC, 50 Hz Installed power (observed): approx. 20.1 kW Motor circuits: 380 VAC — 13.5 kW; 200 VAC — 0.5 kW Heater circuits: 400 VAC — 6.1 kW Advanced Automation & Control Systems The ASB-50 MB architecture enables precise control of heating and stretch-blow parameters for stable bottle quality across different formats. Typical one-stage controls coordinate injection, conditioning, and blowing stations for repeatable results, with safety interlocks and guarding to protect operators. Quick-change mold capability supports efficient format changes, minimizing downtime during product transitions common in industrial packaging and beverage production environments. Production Line Integration Capabilities Designed for PET bottle manufacturing upstream of filling, capping, and labeling systems, this machine integrates effectively with conveyors, accumulation tables, and downstream bottling equipment. Its one-stage process eliminates the need for separate preform handling equipment (such as preform unscramblers, tippers, and elevators), simplifying line layouts in a used bottling line. Bottle format flexibility from 40 ml to 750 ml supports water, juice, CSD, and other beverage applications when equipped with appropriate molds. Machine Condition & Maintenance History This second hand machine is presented in ready-for-operation condition, suitable for immediate integration into an existing beverage production or industrial packaging setup. As with any pre-owned blow molding machine, commissioning checks and routine maintenance are recommended to align the installation with site utilities and product specifications. Operational Performance & Versatility The ASB-50 MB delivers stable output around 1,000 bph in a 4-cavity configuration, with potential to reconfigure up to 6 cavities depending on molds and process settings. Its one-stage design promotes excellent neck dimensional control and clarity, supporting a wide range of bottle shapes within the 40–750 ml range. When paired with suitable molds and process recipes, it can produce PET containers for still water, flavored beverages, and similar products, providing consistent quality for high-uptime pac...

Condition: used, Year of construction: 2009, machine/vehicle number: PR21, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights. Manufacturer: Husky Model: HyPET120 P85/95 E85 Year of manufacture: 2009 Clamping force: 120 tons Cavities: 32 Hot runner system: Husky 32-cavity hot runner, common across supplied molds Neck finishes: 29/25 mm primary; additional parts for 30/25 mm Preform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 g Cjdpfx Abjyhbd Sscegn Additional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g) Cycle times (typical): 7 s, 8 s, 9 s Electrical supply: 400 V, 50 Hz, 3PH+N+PE Main supply current: 191 A (auxiliary supply: 40 A) Short-circuit rating (panel): 10 kA Included peripherals: Plastic Systems resin dryer with material hopper, mold dehumidifier, and available spares Bottle formats supported via preforms: 0.2L, 0.5L, 1.0L Container material: PET Advanced Automation & Control Systems The machine features Husky engineering for precise temperature control, shot stability, and efficient thermal management across the 32-cavity hot runner. The molding system supports fast setup with plug-and-play cold half plates, simplifying changeovers between formats and weights. Operator interaction is streamlined through an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control panel is designed for industrial duty with a 10 kA short-circuit rating and clear segregation of main and auxiliary supplies. Integrated HMI for process control and monitoring Hot runner temperature control across all 32 cavities Quick-change cold half plates, tooling plate, and cooling pick set Electrical: 400 V, 50 Hz, three-phase with neutral and protective earth Production Line Integration Capabilities Optimized for PET preform manufacturing, this system integrates cleanly with upstream resin handling and downstream conveyance to stretch blow molding, quality inspection, and packing stations in beverage production. The included Plastic Systems resin dryer and mold dehumidifier stabilize material and mold conditions, enhancing repeatability and line throughput in broader bottling equipment ecosystems. Inline or standalone operation for preform supply Compatible with industrial packaging and beverage production lines Rapid format changes across 0.2L, 0.5L, and 1.0L bottle formats Designed for PET preforms used in water, juice, and other beverage applications Ma...

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow. Manufacturer: Husky Injection Molding Systems Model: H160 RS45/42 Year: 2009 Application: Cap/closure molding for beverage packaging Cgjdpoyhbdxefx Abcsn Mold cavitation: 24 cavities Closure specification: 29/25 mm, Free Start Cap Nominal part weight: 1.20 g (cap) Clamp force: 160 tons Electrical supply: 400 V, 50 Hz, 3PH+N+PE Main supply current: 101 A Largest motor load: 42 A Largest heat load: 31 A Short-circuit current rating (SCCR): 10 kA Included equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare parts Advanced Automation & Control Systems The machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation. Precision heater control with Altanium technology Clearly rated electrical distribution for motors and heaters Stable process conditions for consistent cap quality Designed for quick setup and repeatable mold changeovers Production Line Integration Capabilities This unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments. Standalone or inline operation with downstream handling Compatible with PET bottle packaging for beverage production Auxiliaries included to stabilize material handling and color dosing Machine Condition & Maintenance History The machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand industrial machinery maintained for continuous service. Operational status: in production Auxiliaries and spares included for upkeep Operational ...

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Codpfx Aex Eitbjbcsgn Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Cgsdpox Eiq Hjfx Abcen Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Cgodpfx Abox Eithscon Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270S-500-60 Year of manufacture: 1997 Serial number: 170175 Control system: Arburg Selogica Cgodpfxox Eiq To Abcsn Clamping force: 500 kN Screw diameter: 15 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Csdpex Eirqsfx Abcsgn Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m Cgedpfjyctzfjx Abcjn All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm Cgedpfeyctyuox Abcon injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Codpfsyctyhsx Abcsgn Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Csdsyctx Repfx Abcogn Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosing volume: 392 cc Clamping Unit: Clamping force: 200 t Cgodeyctw Topfx Abcjn Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping unit: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 2 Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter – energy saving Injection unit driven by a servo motor, controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Parallel motions Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven electrically by servo motors; C-axis pneumatic Travel distance in axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure The purchase of the robot and conveyor belt is available for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Cgsdpfx Aboyctwyjcsn Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 10.2012 Cgodpfx Aeyctwgjbcsn Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 cc Clamping Unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot runner control x 12 Reinforced injection units – bimetallic Machine with two cylinders / compressed nitrogen accumulators (additional charge for fast operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting flap Original Weber rotary table, highly precise – electrically driven Purchase of the rotary table and robot for a surcharge Dimensions: Weight: 8140 kg Length/Width/Height: 4.81x1.84x3.45 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Csdpfxjyctwae Abcogn Price: On request