Used Plastic for sale (6,345)

Year of construction: 2014, condition: used, The lot consists of: (1) Bale Breaker B3, bale opening unit / R%K Solution Systems; Serial No.: 100011/2014 (1) Post-bale-breaker elevating conveyor Prodpfs Afm Dnox Airec (1) Conveyor, Promac Technical Details: 14.2 kW; 400/690 V; 50 Hz; 2,200 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Pjdpfozza Egex Airsrc Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar Prsdpozlxq Nsfx Airjc - Weight: 23 kg"

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader Prjdpfsy R S Twex Airec -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Year of construction: 1999, condition: good (used), Control or regulator card, type ETR 51. Prjdpfx Aiezl T S Usrec The circuit board was manufactured by Plastic Service GmbH. 11 pieces available.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Psdpfxjt S Rduo Airsrc Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material Psdpfx Aszylxisirorc 1 Tonne per Hour

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 2,40,000 mm, total height: 9,000 mm, Model: Saxon 5 Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Podpfx Aoz H T Dweirsrc Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: used, Tray sealer that closes pre-formed trays with film The Meca Plastic S3000 is a tray sealer: you place pre-formed trays with product in the tooling, the machine brings them under the sealing head and seals a top film onto them. The machine has a touchscreen with Dutch menus where the sealing temperature, pressure and speed are set per programme. Prodpfx Ajz Ndh Sjirsc The tooling fitted takes two trays per cycle; tooling is matched to the tray size, so a different tray needs different tooling. The machine was built by Meca Plastic in Pouzauges, France. The type plate is there, but the filled-in fields are no longer legible, so year and serial number are not known. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tray sealer Controls: Touchscreen with programmes, Dutch menus Sealing temperature: Adjustable per programme Tooling: 2 trays per cycle, matched to the tray size Construction: Stainless steel, on castors

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Output capacity 750kg p/h Predpfez Azz Ejx Airsc

Year of construction: 2013, operating hours: 2,000 h, condition: used, functionality: fully functional, The Branson 2000XDT Ultrasonic Welder is a unit providing up to 2500W of power. It is designed for precision and efficiency in various plastic processing industries. With the reputable Branson brand backing it, this ultrasonic welder is perfect for sealing and welding plastic products with ease. This equipment offers reliable and high-quality results for a wide range of plastic materials. Trust in the Branson 2000XDT Ultrasonic Welder for all your plastic welding needs. Pjdpfx Aioz Rm Tzjrjrc We have added sound sound proof housing (white box on photos with internal sound absorbing foam), so workers are not exposed to high frequencies and high sound levels. They can work without hearing protection. Access to work area is possible through transparent Plexiglass door. Dimensions of sonotrode are 200 x 125 x 115 mm L x W x H and allow for large product welding. Sonotrode is flat on the bottom. Number of nests are also part of the offer. Included sound proof housing for quiet operation. No need for additional hearing protection.

Condition: ready for operation (used), Year of construction: 2012, Are you looking for a solution for efficient and environmentally conscious operations? Then a waste compactor is the solution to your waste problem! These powerful and reliable waste compactors are suitable for compressing various materials such as cardboard, plastic, textiles, and other materials. The machines process the waste into bales. Ideal for companies that want to save space and recycle. Specifications Brand: DIXI Type: 60 SD Year of manufacture: 2012 Pressing force: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Pjdpfx Ae Adrtroirorc Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Feed opening dimensions: 115 cm x 80 cm deep x 55 cm high Video available upon request Transport available upon request

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Pjdpfx Ao Afw Hyeirjrc Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Predj Afw Drjpfx Airec Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: new, functionality: fully functional, Year of construction: 2024, screw conveyor diameter: 20 mm, screw conveyor length: 25 mm, noris- Extruder MINI ESE 20/25 D Technical data Prsdohx Elfopfx Airsc Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: repair required (used), Year of construction: 2019, operating hours: 14,967 h, functionality: not functional, machine/vehicle number: 750090, total height: 1,885 mm, total width: 800 mm, total length: 1,240 mm, We are offering this Arburg freeformer 200-3X machine for processing thermosetting plastics, year of manufacture 2019, which requires repair. Description of fault: Extrusion unit 1 is functioning correctly. Extrusion unit 2 is defective (the Arburg service technician suspects a problem with the piezo element or piezo driver). The machine had problems starting up. However, after repeated restarts, it is now functional. Manufacturer: Arburg Model: freeformer 200-3X with dual material preparation Year of manufacture: 2019 Condition: in need of repair Category ID: 1208 Type ID: 1354 Machine type: Machine for thermosetting plastics Podpfx Aie Adprlorjrc Machine number: 750090 Air heat exchanger for active machine temperature control Build chamber heating up to 120°C and temperature control for plasticization up to 300°C Equipment for inline material drying for material preparation 1 and 2 Data preparation software (slicer) incl. license If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2003, condition: used, functionality: fully functional, input voltage: 400 V, input current: 85 A, continuous power: 45 kW (61.18 HP), Plastic granulator ESMOS type Balkán, version M 500/800, manufacturer ESMOS, Bulgaria. For size reduction of plastic waste, particle size depending on screen. Technical data (per manufacturer's documentation): – Feed opening: 800 × 500 mm – Knives: 6 rotor knives, 4 stator knives – Drive: electric motor 45 kW, 1475 rpm, V-belts – Power supply: 3 × 400 V / 50 Hz, rated current 85 A, 63 A plug – Throughput: approx. 400–800 kg/h depending on material and screen – Extraction outlet Ø 146 mm, protection IP 54 – Weight: 2,750 kg Manufacturer's technical documentation available (see PDF). Pjdpfxjz I Izgj Airjrc Condition: in working order. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: excellent (used), Year of construction: 2002, MECA PLASTIC MECA ID.NO. 2620 Meca Plastic mod Meca tray sealer with 2x tools Vacuum / Gas machine. Busch 160 cc vacuum pump year mod 2002 very nice condition! Prjdpfx Ajqu Tw Hjirec Tools 1. 255 x 255 mm Tool 2. 320 x 255 mm. Dimensions 430 x 115 cm H 160 cm.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Pjdpfjy Ufk Rex Airjrc Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: used, Year of construction: 1999, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Podpfo Agk Drex Airorc You can find this and many other items on our platform.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Prsdpfx Aiox Nhy Rersc

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Predpoxrc Eqsfx Airsc Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1, total height: 3,000 mm, total width: 3,000 mm, total length: 40,000 mm, overall weight: 40,000 kg, type of input current: three-phase, input voltage: 360 V, year of last overhaul: 2026, transport length: 12,000 mm, noise level: 70 dB, protection type (IP code): IP46, transport width: 2,500 mm, Equipment: documentation/manual, 21-STAGE LINE FOR PET BOTTLE RECYCLING, INCLUDING SORTING, WASHING, CLEANING, DEGREASING, LABEL REMOVAL, SHREDDING, AND DRYING. Predpfxjz Syplj Airjc

Condition: used, Technical Details: 1 Nextron Technologies Main Extruder NMA30-24D, 1998, 98S01059-01 2 Nextron Technologies Heating, Drive & Control Cabinet, 1998, 98S01059-01 3 Maillefer Secondary Extruder A-CMPT, 2006, Y6S01032-01 4 Maillefer Cooling Bath, Type BAC CB32, N/A, 875738.1 5 Betol Cooling Bath, N/A, A3604* 6 Zumbach Electronic Measuring and Control Unit, N/A, 002589* 7 Kabel Technik Haul-Off Unit, Type KT1983, N/A, Unknown Psdjz Szpmjpfx Airsrc 8 Zumbach Electronic Control / Electronic Unit, Type WALL IPC-EE-0450-A, N/A, SO-00009082 9 Zumbach Electronic Electronic Unit, Type ODAC 18XY-J, N/A, SO-00009080

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Psdpeztxtasfx Airerc Detailed information about the machines is provided in the attached file.