Used Hammon Construction Elevator for sale (20,024)

Year of construction: 2021, condition: used, Serial number: U-H2 52-75-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22059 Specifications: Model year 2021 Weight: 2,500 kg Laodpfjx Ip Uysx Aanok Ready for delivery Own weight: 2500 Model: Schmidt U-H2 klappvingeskjær

Condition: good (used), Window rubber, cutting machine, seal cutter -Hitches: 2 -Dimensions: 2500/600/H1000 mm Laodpfxsb A Ncgs Aanek -Weight: 15 kg

Condition: used, Year of construction: 2008, total length: 1,960 mm, load capacity: 350 kg, Construction machinery Avant Tecno Oy 220 Drive Diesel Laodpfxsx H Aq Eo Aanek Year built 2008 Lifting weight (kg) 350

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Laedpfx Aaow Sfptjnok

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially suited for stair construction, window manufacturing, and universal use thanks to pneumatic height adjustment. Angled dowelling and baluster drilling are easily achieved via the swivelling drilling unit. Lodpfxoxmatnj Aaneak Motor with pole-changing switch, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via practical handle switch Equipped with Röhm 2-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit swivels 65 degrees left and right Pneumatic adjustment of working height – dowelling on two levels without re-setting Desired drilling heights for each level can be set via digital counter; switching is pneumatic from the front Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing rail Pneumatic clamping possible at any position, operable from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamp column can be repositioned to the front 2 swivelling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Set of drill bits Operating manual CE marking Machine has been partially repainted, as paint splashes were present. Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can gladly be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse – see 'other offers from this provider.'

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 3400-206, input voltage: 380 V, For sale: decommissioned dough bowl lifter and tipper. Lsdox Iu Edepfx Aanjak

Year of construction: 2020, condition: used, Serial number: U-H2 58-74-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22058 Specifications: 2020 model Weight: 2635 kg Ready for delivery Laodpfex Ip Umsx Aansk Own weight: 2635 Model: klappvingeskjær

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 2200 kg Total power requirement 44 kw Laodjvz E Tgspfx Aanek

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 25x48x5/9, total width: 23,300 mm, total length: 48,600 mm, total height: 9,200 mm, axle spacing: 4,400 mm, number of axes: 12, We are pleased to present you with the following offer for a high-quality HALTEC Steel-Flex System Hall, which is currently being prepared for dismantling. The hall is in good technical condition, features a durable hot-dip galvanized load-bearing structure, offers great operational flexibility, and an exceptionally attractive price-performance ratio. 1. Object Data Manufacturer: HALTEC. System type: Steel-Flex HS. Dimensions: approx. 25.30 m × 48.60 m × approx. 5.20 m / 9.20 m (span × length × eaves height / ridge height). Lajdpfx Aaox Ndb Djnek Roof type: Gable roof, approx. 18° roof pitch. Condition: used, technically sound; load-bearing structure in perfect order. Anchoring system: ground spike and partial anchor bolt fixation. 2. Construction & Equipment Primary structure: 10 two-hinged frames, IPE 270, S355, with tension rods FL 80 × 15 mm. 2 gable frames, IPE 270, S355, plus gable columns IPE 200, S235. Secondary structure: Purlins and wall rails made from cold-formed hollow sections. Steel cable cross bracing with turnbuckles for structural stiffening. Roof & Walls: Cladding with coated steel trapezoidal profiles. Doors & Gates: 8 electric roller shutters, approx. 3.00 × 3.00 m. 4 emergency exit doors, approx. 1.00 × 2.00 m. Daylight System: Continuous roof light band below the eaves on both sides. 3. Load Specifications (manufacturer standard, estimated) Snow load: approx. 0.75 kN/m². Wind load: approx. 0.50 kN/m². 4. Documentation The hall documentation has been requested and will be made available as soon as it: - is located in the archive of the relevant building authority, or - alternatively, can be sourced directly from the manufacturer. 5. Your Benefits Hot-dip galvanized steel structure – durable, low-maintenance, corrosion-resistant. HALTEC brand quality – German-made system halls. Large gate systems – ideal for logistics, commercial, vehicle fleet, industrial, and storage applications. Flexible deployment – for rental storage, transfer warehouse, workshop, and more. Modular design – ideal for quick assembly and disassembly. 6. Price Offer HALTEC Steel-Flex Hall AS IS (ex location Berlin): by offer. Should you have any questions, require technical clarification, or wish to schedule a viewing appointment, we are at your service at any time.

Condition: like new (used), functionality: fully functional, empty load weight: 9,200 kg, maximum load weight: 28,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2020, loading space length: 11,600 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 11,600 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 80 %, ground clearance: 850 mm, color: dark red, Year of construction: 2020, Equipment: ABS, tail-lift, Bertoja lowbed semi-trailer, 11.70m used, 3 axles with first axle liftable and third axle steering, air suspension, EBS, ride height control valve, 5-ton lashing rings on the sides and deck, wide double electro-hydraulic ramps with wood and grating surface, rear stabilizer legs, total length 11.70m, 8-meter loading platform, year 2020, like new, MOT valid until 30.04.2026 – Dealer INTERDRIVE SRL – Parma Lsdpfxex Nmwhj Aansak

Condition: new, Offered is a new ELBA elevator bucket, 2 m³, track width: 2.08 m. Lajdpfov Tb Epjx Aanok

Condition: new, Mobile warehouse customized quotation Lajdpfx Asxzrtpoanjk

Year of construction: 2021, condition: used, Please contact ATS Norway for more information Lsdpfx Aasx Ip Tpenjak Please provide reference number upon request: 22061 Specifications: 2021 model Approx. 5.5 meters wide Lightly used Ready for delivery Description: Folding wing from 2021.The owner has hardly used it.Ready for delivery. Own weight: 11 Model: 5,5 m

Condition: like new (used), functionality: fully functional, Year of construction: 2023, 2 x Steel modular Delta I-V side forms L=30m – 75.000 euro/piece Laedpfx Aaox Dbzhjnjk Delta beams: Max length: 30m Max width: 640 (with the possibility to make 620/600/580) Max Height: 125cm (minimum 106cm) Slope: 3% Height 150 in the center and 160 at the start/end 1 x Self reacting prestressing bed 75m x 1,25m. – 175.000 euro PRESTRESS BEDS Dimensions: 75m x 1.25m The complete prestressing installation consists of the following elements: the bed, an active stressing head, a passive stressing head, steel end blocks and a set of 2 cylinders 300 Ton optional extended with a hydraulic pump. Useful length of the beds: 75m Width of the beds: 1250 Capacity of beds: 1600T THE ACTIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T THE PASSIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T HYDRAULIC CYLINDERS 2 cylinders x 300T Rings foreseen for blocking during loading. Steel calibrator blocks: Dimensions: 1m25 x 0m50 Capacity: 600T Number of holes: 168

Year of construction: 2022, operating hours: 72 h, condition: used, Serial number: AMOxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21151 Specifications: 2022 model Hours: 72 Weight: 2,950 kg Stage 5 engine Remote control Good tires Ready for delivery Hours: 72 Own weight: 2950 Model: F10 Strekkemaskin. Som Ny. Laodpew R Nnqjfx Aanok

Condition: used, Please contact ATS Norway for more information Laedpfxsx H Ifns Aanok Please provide reference number upon request: 22014 Description:The container has been used as an office inside a warehouse.It was delivered by Containerfabrikken.Ready for delivery.

Year of construction: 2008, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20893 Specifications: Year: 2008 Bucket volume: approx. 1,600 liters Bucket width: approx. 200 cm S70 quick coupler (top and bottom) Previously mounted on CAT 325DL (2008 model) 4 hydraulic hoses (approx. 240 cm) Extra outlet Control system: Engcon No. 9 Description:Engcon EC30 tiltrotator and SMP grading bucket sold as a set.Both feature S70 couplers and were previously fitted to a CAT 325DL.According to the owner, both units are in decent working condition.Available for prompt delivery. Laedpfswwqduox Aansk Own weight: 1000 Model: Engcon EC30 Rotortilt & SMP Pusseskuffe – S70 feste

Condition: used, machine/vehicle number: YS2R4X2000219xxxx, mileage: 1,53,000 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 19971 Specifications: - Km: Approx. 153,000 (can increase) - Transmission: Automatic - Air suspension - Euro 6, 540 hp - Good parts - 4x2 - Retarder/Engine brake - Stiholt on construction - Extra lights on roof and grill Ledpov U S T Hjfx Aanoak - Michelin guys - Rotor lamps - LED light - Bed - Refrigerator - RGB Led throughout the cabin, remote control - Radio/CD - Air conditioning/AC - Ready for delivery Description: Scania R540 4x2 Truck from 2024. Rare opportunity to secure a nice truck with stiholt building and an interior decorated with AC/DC pictures. Ready for delivery. Km: 153000 HK: 539 Technical approved: Yes EU-approved until: 01.02.2026 Own weight: 8700 Total Weight: 22000 Payload: 13300 Width: 255 Length: 616 Euro: 6 Model: R540 4x2 Trekkvogn m/ Stiholt Påbygg. Opptrekt! Gearbox: Automatic

Year of construction: 2017, condition: used, Serial number: 17090xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22089 Description: We have a 2017 Magsi Rateau wood gripper w/s70 mount for sale. Lasdex I U Uxspfx Aansk Everything works as it should, according to the owner. Ready for delivery Model: Rateau wood griper m/s70 feste

Year of construction: 2022, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22090 Description: We have a 2022 LLOYD RS8-14 sale drawer w/ s50-60 combi attachment for sale. Everything works as it should, according to the owner. Can be delivered around the corner. Own weight: 1 Model: RS8-14 soldeskuffe m/ s50-60 kombifeste Lsdpfx Asx I U T Ueanoak

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21737 Lodoxu A Hgspfx Aanoak Description:A total of 3 conveyor belts are sold together.One is in working condition, while two are sold as repair objects.Lengths: approx. 10, 12 and 14 meters.Quick delivery available. Own weight: 11 Model: 3 stk

Condition: used, Please contact ATS Norway for more information Ljdpoxt Dgrsfx Aaneak Please provide reference number upon request: 19981 Description:Handtmann VF 200 sausage stuffer for making sausages, equipped with automatic twister. The machine has been in operation until March 13, 2025 and has worked. It is ready for immediate delivery.

Year of construction: 2000, condition: used, Serial number: 20xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22038 Specifications: 2000 model Toilet Shower Wash Water heater The kitchen Living room Ready for delivery Description: Lajdpjx Hnxbjfx Aanek We have a 2000 20-foot container with toilet, shower, sink, water heater, kitchen and living room for sale. Everything works as it should according to the owner. But there may be errors and shortcomings as it is from 2000. So something on the diet can be counted on. Ready for delivery

Year of construction: 2018, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22031 Specifications: 2018 model S50 mount Weight: 320 kg Ljdpfx Aex Hdiisanjak Ready for delivery  

Condition: used, Please contact ATS Norway for more information Ledpfsx E Nmdsx Aanjak Please provide reference number upon request: 22020 Description: We have an Atlas copco 550 spike hammer for sale. Everything should work as it should according to the owner. It comes with an extra spit and gas filling equipment. Fits S50 and S60 mounts. Ready for delivery