Used Construction Sites for sale (22,024)

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Rcedpfx Abey Ra D Djpof Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: excellent (used), Year of construction: 2016, Construction compressor Manufacturer: Atlas Copco Rsdpfx Ajwubzrobpjcf Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h - Power: 104 kW - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t

Condition: new, functionality: fully functional, machine/vehicle number: HBWW1140, color: blue, Year of construction: 2025, fuel type: gasoline, operation weight: 1,626 kg, Bowser Washer mobile pressure washer The improved Bowser Washer mobile pressure washer from the British company FuelProof is EU/RDW approved and equipped with a highly manufactured 1140-liter polyethylene tank, which is mounted on a robust galvanized chassis. Mounted on the chassis are the tank and the high-pressure unit with hose reel with standard 20-meter hose. These are protected by a tubular frame. Redpfjvf Ibujx Abpscf Furthermore, this pressure washer is equipped with a Honda GX390, 11.7 hp gasoline engine with electric start. The pressure washer gives 15 ltr/min, 200 bar. This machine is expandable into a special sewer unit, making it easier to clean and flush sewers. In short, a versatile unit with an extensive pallet of applications and possibilities!

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Redpfxexu I Ddj Abpscf

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Rjdpfx Aexu I A Tjbpscf

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Rjdpfxjq Nf Tvo Abpjcf Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Rodpfoyfta Tjx Abpocf Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Used steel hall, 36.5 x 13.5m, eaves height approximately 9.8m from finished floor level, gable roof with 3° pitch, top of rail for mounting bridge cranes approximately 8.5m above finished floor level. Originally, the existing hall had 2 x 10t cranes installed. Steel structure including roof and wall purlins, crane runway, 2 x 10t cranes – without wall panels, windows, and doors. As can be inspected on site. Base plates must be newly constructed by the buyer. Rcjdpfx Abspqx I Hopef Price is for the hall as it stands at the location: 56759 Kaisersesch.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 12,300 kg, maximum load weight: 2,007 kg, DGUV certified until: 04/2027, Year of construction: 1980, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Valid safety inspection certificate until 04/27! Rodpfxezuzmxj Abpscf TECHNICAL DETAILS Boom: 30 m Hook height: 34.2 m Load capacity at 15 m reach: 2,007 kg Load capacity at 18 m reach: 1,588 kg Load capacity at 21 m reach: 1,300 kg Load capacity at 25 m reach: 1,030 kg Load capacity at 28 m reach: 881 kg Load capacity at 30 m reach: 860 kg Hoisting rope diameter: 9.07 mm Trolley rope diameter: 6.8 mm Telescoping rope diameter: 12.6 mm MACHINE DETAILS Empty weight: 12,300 kg EQUIPMENT Remote control Safety inspection certificate External reference: 633 The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Rcedpfxezu Akre Abpsf Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: used, Year of construction: 1992, machine/vehicle number: 0554, Anhänge-Kompressor, Mannesmann DEMAG, Baujahr 1992 , abgelesene Betriebsstunden 1219h, Typ SC20DS-2, Gewicht 600kg, Maße mit Deichsel 3160 x 1480 x 1180, Leistung 2,0 m³ je min, 2 Luftanschlüsse, 2 Zyl. Deutz Motor, Kugelkopfkupplung (PKW), Beulen und Rostschäden, siehe Bilder, Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Anhänge-Kompressor, Mannesmann DEMAG, Baujahr 1992 , abgelesene Betriebsstunden 1219h, Typ SC20DS-2, Gewicht 600kg, Maße mit Deichsel 3160 x 1480 x 1180, Leistung 2,0 m³ je min, 2 Luftanschlüsse, 2 Zyl. Deutz Motor, Kugelkopfkupplung (PKW), Beulen und Rostschäden, siehe Bilder, Rcsdpfx Abozt Ix Ejpof Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Year of construction: 2023, condition: used, functionality: fully functional, empty load weight: 874 kg, total length: 1,925 mm, construction height: 1,361 mm, construction width: 1,120 mm, Other Rcedpfx Aozvi Uyebpsf Technical Condition: New Description: The CAT DE65E0 is an emergency generator for construction sites, industry, and events. With its economical diesel engine and robust design, this generator is ideal for providing power during power outages and for mobile and stationary use. Durable, versatile, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. We also offer aerial work platforms and telehandlers for rent and sale. Our equipment is continuously serviced and inspected. Rental, sales, service & repair. You can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used equipment are also possible. Our team will be happy to provide you with competent and personalized advice.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, load capacity: 230 kg, fuel type: electric, total length: 7,680 mm, total width: 2,100 mm, total height: 2,000 mm, working height: 15,200 mm, TECHNICAL DETAILS Rcjdpfx Abjzulr Sspef Working height: 15,200 mm Platform height: 13,200 mm Platform load capacity: 230 kg MACHINE DETAILS Fuel type: Electric Drive system: Pneumatic tires Dimensions & Weight Dimensions (L x W x H): 7,680 x 2,100 x 2,000 mm Transport weight: 1,600 kg Transport packages: 1 unit EQUIPMENT Pneumatic tires

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth Rcjdpeq I Nvijfx Abpsf In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: good (used), Used milling machine, Huron model NU 4. Its robust construction and precise design enable accurate metalworking. The machine is in good working condition and ready for operation. Rjdjzvuyujpfx Abpscf We provide on-site machine loading. Net price, 23% VAT applicable. Feed rate: 1.6-820 mm/min Spindle speed: 30-2066 27 spindle speeds Travel: Y: 700 X: 1100 Z: 470 Work surface of the table: 455x1435 Spindle taper: ISO 40

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone: [number]). Holp VarioBucket / VL.112.400 / OQ45-5 / HARDOX / NEW / in stock & immediately available Price: €4,265.00 net / €5,075.35 gross - Suitable for excavators from 7 to 14 tons - Own weight approx.: 320 kg - SAE capacity: 400 liters - Slope angle: 54° - Trench base radius: 150 mm - The bucket is made entirely from HARDOX. Advantages of the Holp VarioBucket: - Large working surfaces - Robust design using premium-grade materials - Minimal weight thanks to optimized triangular construction - Rounded base - Two working openings - Rectangular working opening - V-shaped - The VarioBucket impresses with its high performance and precise operation. The V-shaped opening enables pinpoint discharge and offers very high trench cleaning performance in drag operation. Wherever higher speed and flexibility are needed to handle various tasks, the VarioBucket is a real asset on the construction site: faster, more adaptable, and safer. We have many more Holp products in stock and available immediately! Mr. Herden (phone: [number]) will be happy to advise you. On request, we are also happy to provide you with financing options. We are an official sales and service partner for Holp, Gierking GMT, OilQuick, Weber MT, Westtech, DMS, Seppi M., Magni telehandlers, JCB construction machines, Mercedes-Benz, and Iveco. With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Holp product range for you! Errors and prior sale excepted! = More information = Condition: New Purpose: Construction Unladen weight: 320 kg Rodpfxoyhykus Abpecf Contact Marius Herden for further information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 1,376 h, machine/vehicle number: GS9008-46249, load capacity: 1,268 kg, total length: 4,810 mm, total width: 2,290 mm, total height: 2,250 mm, working height: 15,000 mm, TECHNICAL DETAILS Working height: 15,000 mm Platform height: 13,000 mm Platform load capacity: 1,268 kg MACHINE DETAILS Fuel type: Diesel Rodpfxezuli Ds Abpocf Operating hours: 1,376 h Dimensions & Weight Dimensions (L x W x H): 4,810 x 2,290 x 2,250 mm Transport weight: 7,040 kg EQUIPMENT User manual Documentation available CE marking CE certificate

Condition: used, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Holp Vario Bucket / VL.112.700 / OQ70/55 / HARDOX / wear plates / NEW / in stock & available immediately Price: €6,520.00 net / €7,758.80 gross - Suitable excavator size: 14 to 25 tons - Own weight approx.: 570 kg - SAE capacity: 700 litres - Slope angle: 54° - Trench bottom radius: 150 mm - Incl. wear plates - The bucket is made entirely from HARDOX. Advantages of the Holp Vario Bucket: - Large working surfaces - Robust design using high-quality materials - Minimal weight due to optimised triangular construction - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The Vario Bucket impresses with high performance and clean operation. The V-shaped opening enables precise dumping and delivers extremely high ditch cleaning efficiency in drag operation. Wherever higher speed and flexibility are required to tackle different tasks, the Vario Bucket is a real advantage on the construction site: it is faster, more adaptable, and safer. We have many more Holp products in stock and available for immediate delivery! Mr. Herden (tel.) is at your service. Financing options available on request. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Further, with 800 used vehicles in stock, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Holp range! Subject to errors and prior sale. = Further information = New: Yes Application: Construction Unladen weight: 570 kg Rcodpsyhyl Sefx Abpsf Contact Marius Herden for further information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 05 18998, load capacity: 225 kg, total length: 6,080 mm, total width: 1,520 mm, total height: 2,080 mm, working height: 17,200 mm, TECHNICAL DETAILS Working height: 17,200 mm Platform height: 15,200 mm Platform load capacity: 225 kg MACHINE DETAILS Fuel type: Diesel Tires: Solid rubber tires Dimensions and weight Dimensions (L x W x H): 6,080 x 1,520 x 2,080 mm Transport weight: 7,240 kg EQUIPMENT New batteries Rsdszulikjpfx Abpecf User manual CE marking Documentation

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Rcsdozhhl Ispfx Abpef Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet.

Condition: new, Maximum Lifting Capacity: The Krachtarmlift boasts an impressive lifting capacity of 600 kg, allowing heavy loads such as steel beams and lintels to be effortlessly moved and hoisted into position. Ease of Use: Thanks to the simple hand crank operation, loads can be lifted and positioned with minimal effort and with millimeter precision. Rcodpfew Eu Hiex Abpjf Safety: Featuring a solid and stable construction, this lift provides maximum safety during operation. Mobility: Fitted with swivel casters, the lift can easily be moved to different locations on the construction site or indoors through door frames. The Krachtarmlift Lintel Lift MUBA is an indispensable tool on any construction site, designed to significantly simplify the lifting and positioning of heavy loads. Renowned for its robust build and user-friendly operation, this lift offers an efficient solution for handling beams, lintels, and other heavy construction materials. Maximum lifting capacity and range: With a load capacity of 600 kg and a maximum height of 2.75 meters (with an optional adapter, the height can be extended to 3.00 m), the Krachtarmlift can lift heavy objects with ease. This makes it ideal for installing lintels and other structural elements at height. Easy to operate: The lift features a smooth and effortless hand crank mechanism, allowing loads to be positioned precisely without excessive physical exertion. The crank is ergonomically designed, ensuring lasting comfort during prolonged use. Safety first: Safety was a critical consideration in the design of the Krachtarmlift. Its robust base ensures stability, even at maximum load. Additionally, the wheels are equipped with brakes, keeping the lift securely in place during operation. Mobility and flexibility: Equipped with swivel casters, the Krachtarmlift can be easily moved by a single person. This makes it simple to transport the lift to various locations on the jobsite, contributing to overall efficiency and flexibility of operations.

Condition: refurbished (used), Lime Slaker Machine, GV-2, Continuous Lime Slaker, Quick Lime Slaker, Used Machine Manufacturer : Construction Machinery Enterprise - License Type : GV-2 Country of origin: Bulgaria Weight : 1,300 kg Capacity : For quick-slaking lime : 2 tonnes/hour For slow-slaking lime : 1.5 tonnes/hour Technical data : Drum speed : 10 rpm Electric motor : 8 kW, 68 rpm Rcodpfx Aezpxkqjbpof The machine structure and its components have been refurbished: Tank body and water jacket section, bearings, electric motor (new), machine frame. It has also received a new modern rotary joint on the water inlet side.

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 Redpfx Asud Iwzjbpecf This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: ready for operation (used), machine/vehicle number: XLRAE55GF0L350661, mileage: 1,61,802 km, power: 163 kW (221.62 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 11,290 kg, Year of construction: 2009, For sale is a used vacuum truck/vacuum vehicle, ideally suited for construction sites, tunnel construction, sewer cleaning, or industrial vacuuming applications. Vehicle details: Vehicle type: Vacuum truck Superstructure: Cylindrical tank with pump and suction system Application area: Tunnel construction, construction site, industry Condition: Used, fully functional Redpfjzcvvlsx Abpecf Robust design for heavy-duty applications Suction and emptying system included

Condition: used, Field of application: Construction Polygonmach mobile or portable hot mix asphalt plant is a type of asphalt plant that is designed to be easily transported and set up at different job sites. Unlike stationary plantsPolygonmach mobile plants can be quickly assembled, disassembled, and moved to different locations as needed. Capacity vary from 40 to 200 tph on design based. The functions of Polygonmach mobile/portable asphalt plant are similar to those of a stationary plant and include: Aggregate Storage and Handling: Polygonmach Mobile plants have storage bins or silos to store aggregates of different sizes. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: Polygonmach Mobile plants have storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Rodpjx D A Agjfx Abpjcf Storage and Loadout: The hot mix asphalt is stored temporarily in storage silos or bins until it is ready for loadout onto trucks for transportation to the construction site. Options: mobile, continuous Capacity: Max.: 200 t/h(122 lb/s)Min.: 40 t/h(24 lb/s)