Used Hand Pump for sale (15,862)

Condition: good (used), power: 5.5 kW (7.48 HP), Item: LC-5833 - Centrifugal pump - LKH-20/155SSS Pgodpfjzv R Iujx Abpor Alfa Laval - Centrifugal Pump LKM Type: LKH-20/155 SSS, 5.5 kW

Year of construction: 2023, condition: like new (used), functionality: fully functional, 2x LEWA Ecoflow Metering Pumps (Unused 2022-2023) Includes: 2x LEWA Ecoflow LDE1 M911S/52 Metering Pumps (Unused 2023) 0.8 m/h capacity 3 kW ABB motors Psdpszwx Skofx Abpsgr

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Pgjdpobuqn Hofx Abper Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: new, PJM pumps are designed for pumping clean and slightly contaminated water in water supply installations, booster sets, pump units, heating systems, and other installations, such as industrial systems. They can also be used for pumping other non-aggressive liquids that do not affect the materials the pump is made of. Psdeyaqchepfx Abpogr

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,300 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 63 kg, total length: 365 mm, construction width: 520 mm, Hand truck Load center: 500 Mast type: None Podjzvikzspfx Abpjgr Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,300 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 63 kg, total length: 365 mm, construction width: 520 mm, Hand truck Load center: 500 Mast type: None Technical condition: New Pgedpfx Abjzviknepor

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,300 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 63 kg, total length: 365 mm, construction width: 520 mm, Hand truck Load center: 500 Mast type: None Pjdpfozvikhox Abpogr Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,300 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 63 kg, total length: 365 mm, construction width: 520 mm, Hand truck Load center: 500 Mast type: None Pedpezvikbsfx Abpegr Technical condition: New

Condition: good (used), Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 1x injection pumps available Pgjdpoh It Trofx Abpor -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

Condition: good (used), centrifugal pump, water pump -Flow rate: 5-42 m³/h -Motor power: 0.75 kW -Speed: 1410 rpm Podpfx Ascg Idlsbpjgr -Inlet pipe connection: DN50 -Pipe connection outlet: DN50 - Quantity: 1 pieces -Dimensions: 570/230/H310 mm -Weight: 40kg

Condition: as good as new (ex-display), Diaphragm pump, FLUX air-operated diaphragm pump – 8 bar,Membrane pump, New condition (without warranty) Manufacturer: FLUX - GERÄTE GMBH (Made in Germany) Type: FDM 25 S/TT Serial number / Part number: 15663 Max. flow rate: 150 – 175 l/min Max. operating pressure (PN max): 8 bar Psdpezrm Aajfx Abpogr Housing material: Stainless steel (S) Diaphragm / Seal material: PTFE / Teflon (TT) Connection size: 1" (DN 25)

Condition: new, machine/vehicle number: R910936910, Oil pump for Lavatec press. Psdpfxoy Ugdxo Abpogr

Condition: like new (used), Kannegiesser and Jensen pump Made of stainless steel Psdjy Uik Iepfx Abpegr Manufacturer: Hanning, power: 3.45 kW.

Condition: used, Metering pumps, including valves, 20 pieces. Pedjzdpu Nspfx Abpsgr

Condition: as good as new (ex-display), Type: PVXS-180-M-R-ES-0000-000 Part number: 8005062705C010 Design: open-circuit variable-displacement axial piston pump Control: electric displacement control Rotation: clockwise Displacement: maximum 180 cm³/rev Psdpfxezvd S To Abpogr Speed: maximum 1,800 rpm Rated pressure: 350 bar Maximum pressure: 420 bar Theoretical flow: maximum approximately 324 l/min Control motor: Georgii Kobold KOD 346-1A MB/S64 Control motor: 0.09 kW, 230/400 V, 1,400 rpm Brake: MB3, 2 Nm, 230 V, 15 W Gearbox: SPN Schwaben Präzision GF71 Condition: unused surplus unit, stored in a wooden transport crate

Condition: good (used), functionality: fully functional, Item: LC-100826-FristamFPE FRISTAM FPE STAINLESS STEEL CENTRIFUGAL PUMPS Manufacturer: Fristam Pumpen, Germany Pump type: Hygienic centrifugal pumps Series: FPE Material: Stainless steel Condition: Used We offer 3 Fristam FPE stainless steel centrifugal pumps, suitable for hygienic applications in the food, dairy, beverage, and processing industries. Available pumps 1. Fristam FPE 3532 A Type: FPE 3532 A Serial No.: 0438460197 Stainless steel pump housing Hygienic connections 2. Fristam FPE 2552/250A Type: FPE 2552/250A Serial No.: 0458460117 Stainless steel pump housing Hygienic connections 3. Fristam FPE 752/250A Type: FPE 752/250A Serial No.: 0482460083 Stainless steel pump housing Hygienic connections Applications Fristam FPE centrifugal pumps are designed for hygienic processing applications and can be used for transferring various liquid products, depending on the required capacity and product characteristics. Typical applications include: Dairy processing Milk and liquid dairy products Beverage production Food processing Water and process liquids Pjdpfxszuzc He Abpegr CIP systems Other hygienic liquid applications The pumps have been disassembled and are available from our warehouse in Denmark. Motor power, RPM, and exact capacity are not specified at this time and should be confirmed before purchase. The pumps can be sold individually or together as a package. Location: Denmark Delivery: EXW Denmark Availability: Immediately available

Condition: reconditioned (used), Year of construction: 2016, Sanitary gate for hand disinfection Automatic hand disinfection station with a turnstile. The turnstile automatically dispenses disinfectant onto the hands. It is activated touchlessly using photocells. The sanitary gate is made of high-grade stainless steel 1.4301 and performs the following functions: Hand disinfection One-way traffic control Technical data: Material: Stainless steel 1.4301 Dimensions: 860 x 860 mm (W x D) Weight: 40 kg Power supply: 230 V Designed for hand disinfection Disinfectant spray activated touchlessly using photocells Equipped with a turnstile that allows passage only after the required actions have been performed. Light signaling (red-green) High throughput In the event of a power failure, the turnstile rotates freely in both directions – in compliance with occupational safety regulations. Pgodpfx Abezvrrboper Video showing how it works:

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Pjdpezvrnijfx Abpogr Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2013, Technical specifications: Product number: WP 0500 D 4V1 Pgodpozvrm Eefx Abpor Year of manufacture: 2013 Capacity: 500 m3/h Maximum vacuum: 0.1 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Pedpfxjzvrmre Abpegr Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Technical specifications: Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Pgodpfx Aezvrmfebpor Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [h x l x w] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum Pjdpfx Aozvrlusbpsgr 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: excellent (used), Year of construction: 2022, Technical specifications: Product number RD 0360 A 5H3 Year of manufacture 2022 Engine power 7.5 kW Capacity 300 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Pedpfx Aszvrh Aobpjgr Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, which is confirmed by the measurement on the sensor in the video attached below. 4.8 -1 on the sensor display means a vacuum of 4.8 to the power of minus one, which equals 0.48 mBar. After major overhaul. The pump is in perfect condition. New oil. New oil filter. New exhaust separators. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Product number RA 0400 B 4ZI Engine power 11 kW Pjdpfxjzvrhps Abpjgr Capacity 400 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2014, Technical specifications: Product number VWP 1500 Pedpfxozvrg Es Abpogr Year of manufacture 2014 Capacity 1000 m3/h Maximum vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.