Used Hand Gluer for sale (7,943)

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker Pjdpfxezlqzgs Airerc - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2018, operating hours: 6,90,00,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel Podpfsyg Edgox Airjrc TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, load capacity: 1,500 kg, lifting height: 2,950 mm, fuel type: electric, mast type: telescopic, construction height: 2,030 mm, battery capacity: 100 Ah, battery voltage: 12 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 440 kg, total height: 2,030 mm, total length: 1,750 mm, total width: 750 mm, fuel: electricity, Hand Pallet Truck Protec S 15 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 2.950 mm Closed height: 2.030 mm Mast: Standard (2S295) Fork length: 1.150 mm Drive: Elektro 24V Battery: 12 V 100 Ah Starter Prsdpfx Ajz Aqcfeirsc Charger: Einphasig 12 V 20 A tested Tyres: Polyurethan Poly Service weight: 440 kg Length: 1.750 mm Width: 750 mm Year of manufacture: 2020 Condition: working condition Internal no.: 1309269 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2022, Technical condition: fully functional and immediately ready for use. An inspection and a test run of the machine on-site can be arranged. If you are interested, please contact us. We can provide additional photos, a video of the machine in operation, and further technical information. Serial number: 22-05-14-028 Country of manufacture: Germany Power supply: 400 V / 50 Hz Rated current: 6.80 A Apparent power according to the nameplate: 3.459 kVA CE marking: Yes GS/DGUV certification: Yes Wood dust tested: Yes Sawing unit Minimum saw blade diameter: Ø 300 mm Maximum saw blade diameter: Ø 500 mm Speed range: 2,000–6,000 rpm Adjustable cutting height Pjdpfez Iv Uuex Airsrc ALTENDORF HAND GUARD safety system

Condition: used, Year of construction: 2009, functionality: fully functional, space requirement length: 14,000 mm, space requirement width: 2,000 mm, total height: 1,500 mm, total length: 12,000 mm, total width: 1,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, Folding-Gluing machine Inramik Vesta 800 Plus 2009 - In production, 2 shifts per day, first owner - Up to 3 gluing points, Velco gluing system - Minimum box width 65mm - Maximum box width 800mm - Glue line monitoring/detection system - 1 ejector unit - Press section equipped with an acceleration/speed-up feature - Air nozzles and full tooling for CD envelopes and sleeves - Suction system at the feeder - Support rails (2 per section, 8 in total) - Central guides, including the upper assembly for packaging alignment - Glue pot converted to a conical fitting (similar to Bobst machines) – a more advanced solution - Two glue wheels, 5mm and 3mm - Belts replaced on a regular schedule The machine has been continuously maintained by our in-house maintenance team; in excellent working condition throughout its entire service life. - Price includes dismantling and loading. Pjdpfe Aa I Nnjx Airerc Price: 45,000 EUR

Condition: used, functionality: fully functional, Leary LS-4R Glue Application & Quality Control System (iQ Enabled), with Array module, Quantum glue valve, and Leary ejector. ###Identification Podpfx Aio Afwpbjrorc Model: LS-4R Serial number: 20406 Part no.: 00140010, Rev. 16 CE marked, iQ enabled ###Configuration (as visible) Leary Array module mounted on an overhead gantry Leary Quantum glue valve with product detection sensor Central glue distribution manifold with 8 outlets, plus a purge valve and pressure gauge Leary PS9 sensors and Leary Quad sensor Leary ejector motor starter for automatic rejection Operator touchscreen display (Leary/Array) Column-mounted control cabinet with overhead gantry and signal tower Pneumatic piston glue pump on a mobile floor stand, with an inline glue filter and filter/regulator/lubricator for air preparation Separate electrical junction box with a complete cabling set Operating instructions for the PS9 sensors on the machine (in Dutch) ###Note The buyer is responsible for disassembling the system; no tools are provided. The system is still connected to power.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: MN.EOC0.00010, Heidelberg Diana Pro 114 Year: 2006 Serial Number: MN.EOC0.00010 Heidelberg Diana Pro 114 (2006) Folder-gluer for straight-line, crash-lock bottom, as well as 4- and 6-corner boxes up to 1,140 mm blank width. Equipped with Digiset, glue wheel unit, and lower gluing unit with refill pump station, Leary glue monitoring system, motorised central conveyor in the folding section, retrofitted Leary flipper, and Vega Vegapack 44 (year 2004). Equipment Feeder Vacuum feeder Blank alignment Folding Section Box styles: straight-line, crash-lock bottom, 4- and 6-corner Central conveyor in the folding section, motorised Gluing Units Glue wheel unit Lower gluing unit with refill pump station Leary system (glue application with glue monitoring) Inspection & Ejection Barcode reader Leary flipper, retrofitted Control & Automation Digiset, quick setup system Delivery Pressing belt delivery Semi-Automatic Collector Vega Pack 44 (2004) Type: semi-automatic collector for manual packing of cartons produced by the folder-gluer Technical Details General Parameter Max. blank width Value 1,140 mm / 44.9 in Parameter Value Board material (folding carton) Corrugated board 200–900 g/m² N-, F-, E-, B-flute Footprint (base machine, L x W) 14.80–17.30 x 1.9 m / 48.6–56.8 x 6.2 ft Net weight Year of manufacture Electricity 7,000–10,000 kg / 15,432–22,046 lb 2006 40 kVA installed total power Straight-Line Boxes Parameter Value Speed up to 500 m/min (650 m/min optional) / up to 1,640 ft/min (2,133 ft/min optional) W (blank width) 45–1,140 mm / 1.8–44.9 in (with small-box device) L (max.) 900 mm / 35.4 in Crash-Lock Bottom Boxes Parameter Value Output W L (max.) D (max.) H (min.) A (min.) up to 50,000 boxes/h 190–1,140 mm / 7.5–44.9 in 900 mm / 35.4 in 200 mm / 7.9 in 50 mm / 2.0 in 60 mm / 2.4 in B (min.) 30 mm / 1.2 in 4-Corner Boxes Parameter Value Output W Psdpfx Aie Afwyqsrerc L A H up to 35,000 boxes/h 120–1,014 mm / 4.7–39.9 in 110–900 mm / 4.3–35.4 in 80–614 mm / 3.1–24.2 in 20–200 mm / 0.8–7.9 in

Condition: ready for operation (used), Quantity 4, Nordson Durablue 4 Hot Melt Pumps Each with one hand held glue spray gun Predpfxj Agcyvj Airec Power 240 volt In excellent condition

Condition: refurbished (used), functionality: fully functional, Hand feeding production Booklet maker, stitching, folding and front edge trimmer, automatic settings to the paper format, min. paper format 230 x 120mm, max. paper format 520 x 350mm, two Hohner 48/5S BDH stitching heads, Prjdpfx Aio Afbn Ujrsc head and corner stitching possible. Machine is ideal for offline hand feeding booklet maker. Most of the belts and other wear parts were replaced. It is tested and in a good working condition.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Waste Stripping Station System with 3 pull-out frames 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Lower pull-out frame Prodpfxo Afwrvo Airjc Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Condition: excellent (used), Year of construction: 1994, Ref: 11166 . 1994 Jagenberg 78-1 Carton Gluer Suitable carton styles:      •     Straight-line cartons      •     Lock-bottom cartons Pedpfx Aij Afhirjrorc Feeder Section      •     6 × 25 mm feeder belts      •     Feeder vibrator / jogger motor      •     2 adjustable main feeder gates      •     Nip rollers Pre-Fold Section      •     2 carriers positioned throughout the pre-fold section      •     1st and 3rd crease line pre-fold facilities Gluing Systems      •      HHS electronic cold glue system with 3 Guns      •     Bottom glue pot with 3 mm glue disc Folding Section      •     2 carriers with central steel support for larger blanks Transfer / Trombone Station      •     Fitted with 2 adjustable carriers      •     Original Jagenberg counter and marker device Delivery Conveyor Total length: 4.3 m      •     2.5 m top compression section with adjustable lever pressure      •     Flow control stacker drive Total Machine Length 10.5 Meters

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Prsdpfx Aietq E U Sorec Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Psdpfxsy Sv Sys Airerc

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, total length: 1,200 mm, total width: 800 mm, overall weight: 100 kg, Equipment: documentation/manual, Hydraulic hand grinder, Hydraulic power unit, 80 liters Motor, 4.0 kW, 380V Speed control via flow regulator, working speed approx. 2500 rpm Central water supply through the shaft Podezv Tagspfx Airsrc Threaded connection: M 24 Length of hydraulic hoses: 13.0 m Weight of the grinder: approx. 3.8 kg

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request Prsdpjhzhynsfx Airjc All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder Predpezlqwzjfx Airjc - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Year of construction: 2021, condition: new, functionality: fully functional, • Brand: Vaisala • Device Description: Hand-held CO2 Meter GM70 • Configuration Code: B0A1L0A2B • Serial Number: T1050002 • Part/Product Number: 551011675 • Revision / Design Code: 3631.B.0163 • Origin: Made in Finland (Helsinki) • Certifications: CE Mark, WEEE symbol (crossed-out wheeled bin) Psdpfx Ais Aayc Hjrjrc Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 170, type of input current: AC, total width: 1,300 mm, total length: 12,278 mm, total height: 1,133 mm, input voltage: 400 V, compressed air connection: 8 bar, power of the servo motor: 25,000 W, overall weight: 7,000 kg, Equipment: CE marking, PAKTEK GM1050 + cold glue system in very good condition, available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in relatively low usage and a well-preserved overall condition. The PAKTEK GM1050 is currently in very good working condition and is ready for continued production. Regular maintenance and careful operation have ensured that the machine remains reliable and suitable for professional production. Machine highlights: Manufacturer: PAKTEK Model: GM1050 Very good overall condition Well maintained Prjdpfx Aisz Hk Tverec Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment A good opportunity to acquire a well-maintained PAKTEK GM1050 with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: not inspected (used), functionality: unexamined, Equipment: documentation/manual, Weishaupt WL40Z-A oil burner, left-hand version, complete with installation and operating instructions. Used, dismantled unit for professional inspection and repair before commissioning in a suitable heating system. DEVICE DATA Manufacturer: Weishaupt Model: WL40Z-A, left-hand version Dimensions according to documentation: approx. 450 × 480 × 812 mm Weight according to documentation: approx. 37 kg CONDITION AND DEFECTS Used and untested. Functionality is not guaranteed. Cleaning recommended. Oil hoses must be replaced. Last use and year of removal are unknown. Prodpfjz Hcufsx Airec On-site functional testing is not possible. Before commissioning, a specialist company must verify the suitability for the intended system and the safe condition. DELIVERY SCOPE AND PICKUP Oil burner with installation and operating instructions; condition and version see photos. Location: Reutlingen, Germany. Inspection and pickup by appointment. Price: 1,380 EUR net, negotiable, plus statutory value-added tax. Reference: RQ457795

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force. Prjdjxz Niuspfx Airsc

Condition: good (used), Electrical specifications: 2A/420W 3900 rpm 220V, 50Hz Includes a rubber cutting disc for repairing scratches and edges. The unit is ready for use. Height: 230 mm Predpfxjz Rpi Sj Airsc Depth: 230 mm Width: 200 mm Weight: 3200 g Condition: good, second-hand

Condition: used, Year of construction: 2022, 2022 | Wacker Neuson AP1850e | Used Hand compactor Pedpo Aa Di Rjfx Airsrc 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Like new machine 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41482 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, Erba Titan 6PN cutting machine Year of manufacture: 2000 Technical specifications: • Maximum sheet size: 1210 x 1700 mm • Pneumatic clutch and brake • Hard cutting plate • Die mounting: screwed to the frame • Three machine operating modes • Central lubrication pump • Laser safety system Machine in good technical condition, fully functional and ready for use. Ideal for companies with medium to high production volumes. Psdsxb A Nhepfx Airorc EXW PRICE POLAND: EUR 30,000

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools Podpoyyap Esfx Airsrc • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Prjdsu Icqaopfx Airec Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *