Used Hermle C22U for sale (119)

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Travel in X, Y, Z axes: 450, 600, 330 mm Max. spindle speed: 18000 HSK-A63 rpm Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request. Bsdpfxsy Rgfzs Abtjwt

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: Bwsdjzyq Ebspfx Abtot - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: excellent (used), Year of construction: 2021, X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm A-axis: +31 to -139 degrees C-axis: 360 degrees Rotary table diameter: 650 x 540 mm Tool interface: HSK-A63 Tool changer: 88 positions Spindle speed: 18,000 rpm Control system: Heidenhain TNC 640 Includes: coolant system 40 bar Includes: compressed air through the spindle center Includes: Heidenhain measuring probe Includes: BLUM LC 50 Type 200 tool measurement / tool breakage detection Bjdozyu N Rspfx Abtewt Includes: BLUM LC 50 DIALOG technology Includes: Rotoclear Includes: Documentation

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. Bsdpjygx Hnofx Abtowt The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, In very good condition, used for light milling operations. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection system. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Bedpfozw Rl Asx Abtewt Direct sale to end-users only.

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 9731, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 55 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 7 m/min, table length: 900 mm, table width: 458 mm, table height: 900 mm, type of input current: three-phase, total height: 1,890 mm, total length: 3,970 mm, total width: 3,740 mm, overall weight: 2,300 kg, input voltage: 380 V, space requirement width: 3,740 mm, space requirement length: 3,970 mm, space requirement height: 1,890 mm, milling spindle length: 75 mm, year of last overhaul: 2015, grinding spindle motor power: 59 W, Equipment: documentation/manual, rotational speed infinitely variable, Control system: HEIDENHAIN TNC 407 Bwsdpfx Aezyp Twsbtet Travel range: X = 600, Y = 400, Z = 420 mm Spindle speed range: 20 – 4000 rpm Gear stages: 3 Tool holder: SK 40 Arbor stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electric handwheel, various tools (without cabinet).

Condition: excellent (used), Year of construction: 2015, operating hours: 22,387 h, Manufacturer: Hermle | Type: C 400 U | Serial number: 23589 | Year of manufacture: 2015 | Operating hours: approx. 8939 | Control system: Heidenhain TNC 530; Travel ranges (X/Y/Z): 850 / 700 / 500 mm; Swivel/rotating table: Ø 630 mm, integrated, C- and B-axis. Tool magazine: 38 positions; Spindle speed: up to 18,000 rpm; Drive power: approx. 20 kW; Machine weight: approx. 8,000 kg; Cooling system: Knoll 850 K-1 with high-pressure unit; Coolant system; Central filter with return conveyor and heat exchanger; NC swivel rotary table; The operating hours refer to spindle operation. | Dimensions: approx. 4000 mm x 3400 mm x 2700 mm (W x H x L) | Approx. 10,500 kg | The specified dimensions are approximate values. All other information is provided without guarantee. | Grey | Steel Category: Machines and technical equipment Bedpfx Aozq Dkxsbtswt

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hermle U1130 5-Axis Very good condition! Available immediately! Operating hours: 35,500 h spindle hours total: only 11,000 h Maintenance measures in 2018: machine rebuild, drive, spindle: for €30,000 Travel: X-1130 mm, Y-720 mm, Z-630 mm table size: 1300 x 720 mm max. table load: 700 kg NC rotary table: 800 mm diameter, 20 rpm B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 Bodpfezych Uox Abtowt tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain

Condition: ready for operation (used), Year of construction: 2017, operating hours: 27,660 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 20,000 W, table load: 1,000 kg, number of slots in tool magazine: 36, number of axes: 5, This 5-axis HERMLE C 32 U was manufactured in 2017. It features a maximum X-axis travel of 650 mm, Y-axis travel of 650 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed range of 20 - 18,000 rpm and a tool magazine capacity of 36 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C 32 U universal machining centre we have for sale. Contact us for further details. - Spindle Power (100%/20% ED): 10 / 20 kW- Spindle Torque (100%/20% ED): 87 / 180 Nm- Swivel Rotary Table Diameter: 650 x 540 mm- Swivel Range (A-Axis): +/- 130°- Swivel Range (C-Axis): 360°- Tool Magazine Capacity: 36 positions (standard) + 50 positions (additional magazine)- Rapid Traverse (X-Y-Z): 45 - 45 - 40 m/min- Max Acceleration: 6 m/s²- Internal Coolant Supply: 80 bar- Coolant Tank Capacity: Main tank 100 L, IKZ tank 1100 L- Power Consumption: 37 kVA (Nominal: 45 kVA)- Supply Voltage: 400 V / 3PH / 50 Hz- Nominal Current: 60 A- Control Voltage: 24 V DC Bodpfx Abszxdrxotswt Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Bjdszwmx Sopfx Abtowt Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: used, Year of construction: 2002, operating hours: 1,38,929 h, functionality: fully functional, machine/vehicle number: 15233, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, table width: 465 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 16,000 rpm, rotational speed (min.): 20 rpm, table load: 1,000 kg, overall weight: 6,000 kg, input voltage: 400 V, controller manufacturer: Heidenhain, controller model: iTNC 530, torque: 16,000 Nm, workpiece length (max.): 3,177 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 2,750 mm, spindle motor power: 15,000 W, nominal power (apparent): 30 kVA, number of spindles: 1, spindle nose: SK 40, tool diameter: 80 mm, tool length: 250 mm, tool weight: 6,000 g, operating hours of spindle: 30,484 h, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used HERMLE C 600 V, manufactured in 2002, for sale. Bwjdszldknjpfx Abtet Manufacturer: HERMLE Model: C 600 V Year of manufacture: 2002 Condition: used If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Bwsdpfx Aezx Rvkjbtst Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Hermle 3-Axis Machining Center Bodpfx Abjzxpp Ajtewt Type C 600 V Year 1998 CNC Heidenhain TNC

Condition: used, Year of construction: 1997, Hermle UWF 1202 S CNC machining center CNC machining center Hermle Type/Model UWF 1202 S CNC control Heidenhain TNC 426 Condition Used Year of manufacture 1997 Technical data Travel X / Y / Z axis: 850 mm / 630 mm / 500 mm Spindle speed: 20 - 4,200 rpm (stepless) Table dimensions: 1,200 x 550 mm Rapid traverse (X/Y/Z): 10 m/min Machine weight approx.: 5,500 - 6,000 kg Installation dimensions (L x W x H) approx.: 3.3 x 2.24 x 2.24 m Accessories: - approx. 85 collets SK 40 - extensive milling cutter assortment - swivel head - measuring probe - zero-setting device - set of parallel blocks Bwjdszx Umtjpfx Abtst - Almatic machine vise - dividing head - collet chuck Röhm ZG250 Inquiry item: Transportation costs in a separate quotation.

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Bwjdpfezpfg Eex Abtet Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks

Condition: used, Year of construction: 1997, Control HEIDENHAIN serial number 11730 x-axis 800 mm y-axis 600 mm Bwsdpfjzycrysx Abtet z-axis 500 mm turning speeds max. 18000 U/min rapid travel - longitudinal/face 35 m/min chip conveyor ja kW weight 7 t

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,092 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis HERMLE C 52 U was manufactured in 2015. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 1100 mm, and Z-axis travel of 750 mm. The machine is equipped with a spindle speed of 18000 rpm and a table load capacity of 2000 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 52 U vertical machining centre we have for sale. Contact us for further details. - Main Drive Power (100%/20% ED): 17.5 / 35 kW- Torque (100%/20% ED): 108 / 215 Nm- Table Clamping Surface: Ø 1150 x 900 mm- Swivel Range: +100° to -130°- Tool Places in Internal Magazine: 60- Tool Places in Additional Magazine (ZM135): 135- Max. Tool Diameter: 95 mm (160 mm with free adjacent spots)- Max. Tool Length: 500 mm- Max. Tool Weight: 15 kg- Internal Coolant Supply: 80 bar- Coolant Tank Capacity: 1500 l- Voltage: 400 V / 50 Hz- Nominal Current: 100 A- Power Consumption: 68 kVA (Max 71 kVA)- Additional Equipment: Paper band filter, chip conveyor, blow-off device, glass safety windows with rotating clear view window, Heidenhain electrical thermal compensation, Heidenhain HR handwheel module, BLUM tool breakage/measurement A2, chip flushing gun, emulsion mist extraction, m&h 25.50 HSK-A63 infrared touch probe, DCM collision monitoring Technical Specification Taper Size HSK 63 Bwjdozw N Hfjpfx Abtot

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Bedozt Nywjpfx Abtjwt Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, Bsdpfezghngex Abtowt maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Bwodpfx Aozbrz Iobtjt Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Bjdozv Syfepfx Abtewt Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Bsdpfxozvv I Te Abtswt

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Bwedpjzm Sphofx Abtet Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T

Year of construction: 1987, condition: used, X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible. Bodpfxszwfq Te Abtowt

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe Bwsdpfx Aexgukbebtot - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.